How to Remove the Airbag on a Haval H6?
2 Answers
Haval H6 airbag removal method: 1. First, remove the screw on the left side of the steering wheel; 2. Then remove the screw on the right side of the steering wheel; 3. Next, remove the screw below the steering wheel; 4. Unfasten the wiring harness clip of the steering wheel airbag; 5. Remove the horn grounding wire inside the steering wheel; 6. Pry open the yellow lock on the vehicle's airbag; 7. Push open the unlocking latch to complete the process. The Haval H6 has a length of 4649 mm, width of 1852 mm, height of 1710 mm, and a wheelbase of 2680 mm. The Haval H6 is a compact SUV equipped with two engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine.
Removing the airbag from a Haval H6 requires extreme caution, as accidental deployment is no joke. The first step is always to disconnect the negative battery terminal and wait at least 15 minutes for the system to fully discharge—static electricity could otherwise trigger the airbag. Locate the two small holes on either side behind the steering wheel, insert a flathead screwdriver until you feel contact with the retaining spring, then gently pry outward to partially release the airbag cover. Don't yank it immediately—carefully release the yellow power connector's locking tab and the horn wire connector at the back of the airbag module before slow removal. Keep the steering wheel centered throughout, and realign the markings during reinstallation. If the airbag shows any swelling or unusual odor during the process, stop immediately and consult a professional.
