How to Remove the Airbag of Great Wall Haval H6?
3 Answers
To remove the airbag of the Great Wall Haval H6, follow these steps: 1. Remove the screw on the left side of the steering wheel. 2. Remove the screw on the right side of the steering wheel. 3. Remove the screw below the steering wheel. 4. Unfasten the wiring harness clip of the steering wheel airbag. 5. Remove the horn grounding inside the steering wheel. 6. Pry open the yellow lock on the airbag. 7. Push open the unlocking buckle to release it. The purpose of the airbag is to effectively protect the heads and chests of the driver and front passenger in the event of an accident. Taking the 2021 Urban Edition Great Wall Haval H6 as an example, its front suspension is a MacPherson independent suspension, and the rear suspension is a double-wishbone independent suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 150 PS, a maximum power of 110 kW, and a maximum torque of 210 Nm. It is paired with a 6-speed manual transmission.
As a hands-on car owner, removing airbags is definitely not something to take lightly. First and foremost, safety comes first—disconnect the negative terminal of the car battery for at least half an hour to ensure the system is completely discharged. Otherwise, the airbag might accidentally deploy during the operation. Then, locate the airbag cover on the steering wheel and carefully remove the securing screws with a professional screwdriver. The airbag module in a Haval H6 is usually connected to wiring harnesses, so gently wiggle the connector when unplugging to avoid breaking it. After removal, you’ll also need to handle the sensors, which are extremely sensitive—any mishandling can trigger fault codes. I once tried it myself and ended up spending a fortune on repairs at the shop because I didn’t do it right. My advice? Don’t cut corners—take it to a certified repair shop and have them inspect it with diagnostic tools before attempting anything. After all, airbags are life-saving devices, and damaging them isn’t just about the cost. Regular maintenance checks by technicians to monitor airbag status can also help prevent issues down the road.
As an average family user, I get nervous just looking at the faulty airbag in my Haval H6. This is definitely not something you can casually disassemble yourself—if you make a mistake and the airbag suddenly deploys, the force could injure someone or even damage other components. I’ve heard you need to disconnect the battery first, then carefully remove it with tools, but the specific steps are too vague. Some people online say that for the Haval H6, you have to remove the steering wheel cover first, then carefully unplug the wiring, but I’m afraid of causing a short circuit that could lead to a full system failure. Considering safety regulations are getting stricter, DIY disassembly might even be illegal. Last time, my neighbor tried removing an airbag and triggered a chain reaction, costing over a thousand bucks in repairs. I recommend everyone just drive straight to a 4S shop or find a certified technician—they have the experience and professional equipment to handle it safely. Also, pay attention to the airbag warning light while driving; if it lights up, get it checked immediately—don’t wait until it fails to take action.
