How to Remove the Airbag in Chery Ant?

1 Answers
DeHazel
07/25/25 1:11am
Turn off the ignition key. If you proceed with removal without turning it off, accidental deployment may occur, or error codes might be generated, causing the ECU to malfunction. There are two bolts on the back cover of the steering wheel. Remove the bolts and gently lift the cover. Then, take off the steering wheel. Disconnect the clock spring connector attached to the inflator. Typically, the connector has a locking mechanism—some require pressing to release, while others need to be pulled out. Unclip the yellow safety latch behind the airbag, then pull out the airbag connector to remove the airbag.
Was this review help?
11
1
Share
More Forum Discussions

How to turn on the air conditioning in the Roewe RX5?

The air conditioning in the Roewe RX5 is turned on using the control switches on the air conditioning panel. Steps to turn on the cold air: 1. Turn on the A/C switch of the car air conditioning. 2. Rotate the temperature control button to the cold air mode. 3. Adjust the fan speed button to set the appropriate wind speed for cold air mode. To turn on the warm air, there is no need to turn on the A/C switch. Simply rotate the temperature control button to the warm air mode and then adjust the fan speed button. Precautions for turning on the warm air in the Roewe RX5: 1. After starting the car, wait about 8-15 minutes for the water temperature to rise to normal temperature before turning on the warm air (i.e., when the water temperature reaches the middle level). 2. Adjust the air circulation mode to internal circulation. 3. Switch to warm air mode, which is indicated by a red zone on some cars or a sun symbol on others. 4. Do not turn on the A/C switch, as the warm air utilizes the car's own heat circulation to save energy. 5. Adjust the air conditioning to the appropriate level and set the air outlet direction. 6. The warm air should be directed forward and towards the feet, while the cold air should be directed forward.
16
0
Share

How to Open the Volkswagen Engine Hood?

Volkswagen engine hood switch is located at the lower left corner of the driver's seat. Lift the engine hood and open it, then remove the engine hood support rod from its fixed bracket and hang the support rod into the groove on the engine hood. To avoid damaging the engine hood and the windshield wiper arms, ensure the windshield wipers are folded before opening the engine hood. Additional information: 1. Windshield washer fluid reservoir, where you can refill the windshield washer fluid. Antifreeze reservoir, also known as coolant, requires regular checks on the fluid level. 2. Engine support rod, used to hold the engine hood open after lifting. Engine brake fluid reservoir, needs replacement every 40,000 kilometers. The engine comes in three power options: 1.6L, 1.4T, and 1.2T. 3. The battery has a lifespan of 3-4 years. Use the oil dipstick to check the oil level. Air filter, inspect and replace the air filter element by removing it from here.
7
4
Share

What is the oil specification for the Bin Yue?

The Bin Yue uses Shell 0W-20 oil. It is best to use the original factory oil for optimal performance with this vehicle. The new model features a sharp-angled front fascia, but the Bin Yue PRO series has been upgraded with a sporty design, including dual-tone racing wheels, cannon-style dual quad-exit racing exhaust pipes, and aircraft-inspired bumper styling. Relevant information about engine oil is as follows: 1. Engine oil, motor oil, or engine lubricant is a substance enhanced with additives in base oil, primarily containing anti-wear additives, detergents, dispersants, and multi-grade viscosity index improvers. 2. Engine oil is formulated by blending base oils composed of petroleum-based hydrocarbons (organic compounds consisting of carbon and hydrogen) or polyalphaolefins (PAO), or mixtures of these in varying proportions.
12
3
Share

Where is the seat heating switch for the Inspire located?

The seat heating switch for the Inspire is located above the circular air conditioning knob on the center console. The second button from the left is the seat heating function, indicated by a seat icon with wavy lines. Seat heating works by using electric heating wires inside the seat to warm it internally, then transferring the heat to the occupant through thermal conduction. This improves comfort in winter by addressing the discomfort caused by cold seats after prolonged parking. Specific details are as follows: 1. Seat heating is typically featured in vehicles with leather seats, as leather surfaces tend to be colder in winter. With front seat heating, occupants won't feel the chill of cold leather when sitting down in winter. 2. All electric heating devices come with adjustable temperature controls. Seat heating can be divided into front seat heating and rear seat heating. When using the heating function, it's advisable not to operate it for extended periods or set the temperature too high. Owners should turn it off once a comfortable temperature is reached. When the heating function is activated on an unoccupied seat, avoid placing heat-conductive items such as clothing or paper on it to prevent rapid temperature rise and potential hazards.
9
2
Share

What are the differences between the Mercedes-Benz CLA and GLA?

The main differences between the Mercedes-Benz CLA and GLA are as follows: 1. Vehicle type: The CLA is a compact sedan, while the GLA is a compact SUV. 2. Engine options: The GLA uses a total of three engines, which are a 1.6-liter turbocharged engine, a low-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine; the CLA uses a total of four engines, which are a low-power version of the 1.6-liter turbocharged engine, a high-power version of the 1.6-liter turbocharged engine, a low-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine. 3. Transmission: Both models are equipped with a 7-speed dual-clutch transmission.
8
3
Share

How to reset the maintenance reminder light on a 2019 Haval H6?

2019 Haval H6 maintenance light reset operation steps are as follows: 1. Turn on the ignition switch to power the car, keeping the engine off; 2. Press the "Reset" button, and the display will show the reset system; 3. Each press of the "Reset" button will switch to the next reset system; 4. Select the maintenance reset system and long-press the "Reset" button for 3 seconds; 5. The instrument display will show a relevant image, indicating the maintenance reset is successful. The purpose of the maintenance light is to record the mileage of important components, serving as a reminder for car owners and maintenance staff. When the maintenance light comes on, it indicates that the car needs maintenance. The maintenance interval for the Haval H6 is every 7,500 kilometers. For maintenance, the Haval H6 enjoys a policy of the first 4 maintenance services being free.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.