How to Remove the Air Filter of Mercedes-Benz C260?

1 Answers
DiFaith
07/29/25 8:55pm
Method for removing the air filter of Mercedes-Benz C260: The air filter of this car is located behind the glove compartment on the passenger side. To replace it, you need to first remove the glove compartment, then open the cover of the air filter, so that the old filter can be taken out. The air filter of the car needs to be replaced regularly. It is recommended that the owner replace it every 10,000 kilometers. The Mercedes-Benz C-Class is a mid-size sedan. The engine of the Mercedes-Benz C260 has 184 horsepower and 280 Nm of torque. This engine can output maximum power at 6,100 rpm and maximum torque at 3,000 to 4,000 rpm. The engine is equipped with a 48V mild hybrid system and uses an aluminum alloy cylinder head and block.
Was this review help?
13
4
Share
More Forum Discussions

Why are Lu D cars so cheap?

Because Lu D cars are generally decommissioned taxis with very low resale value, hence they are cheap. Below are precautions regarding used car transactions: 1. Prepare the necessary documents for used car transactions: Before processing the vehicle license for a used car, you need to prepare the relevant documents required for the license. Necessary materials for used car transactions include the vehicle license, vehicle registration certificate, vehicle purchase tax certificate, road maintenance fee receipt, insurance policy, vehicle and vessel usage tax certificate, and ID card. The used car transaction contract must be supervised by the industrial and commercial department, with both buyer and seller holding a copy. The contract must be filed with the industrial and commercial department before proceeding with vehicle modification or transfer procedures. 2. Pay attention to the usage condition: When purchasing a used car, pay attention to the vehicle's usage condition, such as the production date and mileage. The mileage reflects how long the car has been driven, directly indicating the vehicle's lifespan.
10
0
Share

What should be paid attention to on highway ramps?

On highway ramps, the following should be noted: While entering the ramp, quickly increase your speed, but do not exceed the speed limit indicated by the signs. Overtaking, making U-turns, stopping, and reversing are prohibited on ramps. Below are related details: 1. Reasons for danger: There are two main dangerous situations when driving on ramps: one is changing lanes too close to the ramp entrance, even swerving directly from the overtaking lane into the ramp; the other is stopping and reversing after passing the ramp entrance to re-enter the ramp. 2. Precautions: Before entering the ramp, turn off the turn signal and control your speed to ensure it is below the limit indicated by the signs. On the ramp, be mindful of merging vehicles from other lanes, yield appropriately, and avoid aggressive driving.
5
0
Share

How to Use the Spare Key to Open the Car Door Without Triggering the Alarm?

Methods to use the spare key to open the car door without triggering the alarm: 1. Mechanical Key Unlock: Whether it's the primary key or the spare key, unlocking with a mechanical key will be recognized by the car's computer as an intrusion because locking was done via remote while unlocking is mechanical, which defaults to a forced entry and triggers the alarm. However, if you lock and unlock the car using the mechanical key, the alarm won't sound—this is a safety feature. The alarm will cancel once the engine is started. Since remote key locking activates the alarm, using the spare key to open the door will trigger the alarm. Quickly inserting the key and turning on the ignition will stop the alarm. The spare key contains an engine decoding chip, allowing you to start and drive the car. 2. Precautions: The spare key is for emergency use and should not be kept inside the car under normal circumstances. However, if you're going on a long trip, carrying the spare key with you is advisable. Keep it on your person, as losing or being unable to use the primary key may require breaking a window to retrieve the spare key, leading to significant losses.
2
3
Share

What does AUX in a car stand for?

AUX is an audio input interface. The basic working principle of the AUX interface is that after connecting to the AUX interface, the audio in electronic products can be connected to the car audio through the headphone jack and AUX interface, and the audio can be played in the car audio broadcasting facilities. The USB interface can be inserted with a USB flash drive to play audio. When using it, connect one end to the AUX interface and the other end to a video player such as a mobile phone, MP3, or MP4. This allows you to listen to songs or niche music anytime, anywhere, without being limited to car music CDs. However, if the playback device runs out of power, the music will also stop (the interface is generally a 3.5mm labeled headphone jack). Aux is the abbreviation for Auxiliary, which is an additional signal line design. In general audio equipment, in addition to the official output and input terminals, there are often several terminals labeled Aux as backup connection terminals. When there are special applications, such as additional sound output or input, this type of terminal can be used. These backup terminals or lines, whether input or output, are collectively referred to as Aux. Function: The AUX port is an asynchronous port, mainly used for remote configuration, dial-up connections, and can also be connected to a MODEM through a transceiver. It supports hardware flow control. The AUX port and CONSOLE port are usually placed together because their respective applicable configuration environments are different. The AUX interface establishes a command-line connection between the user and the device, enabling operations that are usually impossible in user mode, such as initialization, restoring initial configuration, and correcting abnormal user modes. It provides a fixed port for the device, which can be used as a standard asynchronous serial port with a maximum speed of 115200bit/s. Using the AUX interface, remote configuration and line backup functions for hardware products can be achieved. Note: When using the AUX interface, make sure to buy the correct connecting cable and avoid plugging the audio cable into the wrong port. It is best to follow the steps in the product's user manual when using the AUX interface. If you are still unsure, you can consult the product's official website or call for assistance.
17
4
Share

What to Do If the Vehicle License Expires?

If your vehicle license has expired, you should drive to the vehicle management office in the jurisdiction where the vehicle is registered as soon as possible, bringing the original vehicle license and the original certificate of compulsory traffic accident liability insurance valid for more than 15 days to complete the annual inspection procedure. In fact, the vehicle license does not have a fixed expiration date, as the validity period on the license changes with each annual inspection. Therefore, an expired vehicle license actually means the vehicle's annual inspection has expired. Specific solutions: 1. If expired for less than 1 year: Simply go to the traffic management office promptly to renew the license. 2. If expired between 1 to 3 years: You need to take the subject one exam at the vehicle management office and then proceed with the renewal. 3. If expired for more than 3 years: The driver's license will be revoked, and you will need to re-enroll in a driving school and pass the relevant exams.
15
3
Share

Does a vehicle need maintenance at 70,000 kilometers?

After a vehicle reaches a mileage of 70,000 kilometers, maintenance is required. Here are the relevant details: 1. Vehicle spark plugs: They should be replaced once the car reaches 70,000 kilometers. The theoretical lifespan of standard spark plugs is 30,000 kilometers. If they malfunction, it can cause a "misfire" phenomenon. Listen carefully, and you may hear a "puttering" sound, and black smoke may also come from the exhaust pipe. 2. Transmission oil: The longer the oil maintenance is delayed, the more corrosion, metal shavings, and even sludge can accumulate inside the gears, leading to insufficient lubrication of the transmission's internal components and creating a vicious cycle. This manifests as difficulty in shifting gears while driving, posing significant hidden dangers. 3. Brake fluid and brake pads: Driving fast doesn't necessarily mean good driving skills; the real skill is being able to stop the car in critical moments. The importance of brake pads goes without saying—they are crucial. It's recommended to check their wear level once a year or around every 30,000 kilometers, as they have a wear indicator. Additionally, if the braking distance increases, the brake fluid should also be replaced. It is advisable to replace the brake fluid every two years.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.