How to remove the air conditioning filter of Zotye SR7?

[MacDakota]

Zotye SR7 air conditioning filter removal method is as follows: 1. Locate the fixing buckle on the right side of the glove box in the co-pilot seat and pull it outward with force. 2. After removing the buckle, squeeze both sides of the glove box towards the middle with both hands to remove the glove box. 3. After removing the glove box, you can see the air conditioning filter cover plate. There are two buckles on both sides of the air conditioning filter. After removing the buckles, you can take out the air conditioning filter. Below is some extended information about the air conditioning filter: Air conditioning filters with activated carbon coatings are more expensive, but they also produce better results. Air conditioning filters with activated carbon can not only filter impurities from the outside air but also absorb odors produced by long-term operation of the air conditioning system.

[VonNoah]

I used to drive a Zotye SR7, and replacing the cabin air filter was quite simple. Open the glove compartment on the passenger side, empty its contents, and look carefully inside—you’ll find a small cover panel, possibly secured with clips or screws. Use a Phillips screwdriver to remove the screws, being careful not to force it to avoid damaging the plastic parts. Once the panel is off, you’ll see the old filter. Gently pull it out—you’ll likely notice a lot of accumulated dust. When installing the new filter, pay attention to the arrow direction (usually pointing downward or toward the front of the car); installing it backward can disrupt airflow. No special tools are needed—just ten minutes of work saves repair shop costs and prevents odors. I recommend replacing it every six months, especially in dusty conditions, to maintain AC efficiency and protect lung health. Turn off the AC system before starting to avoid stirring up dust and triggering allergies.

[DelArya]

Removing the air conditioning filter is a routine task for me, especially in the Zotye SR7. Before starting, turn off the AC engine, sit in the passenger seat, and open the glove box to press open the inner clips. Usually, the cover plate can be removed directly, but sometimes a screwdriver is needed to loosen it. The filter is located right behind, just pull out the old one and replace it with a new one. The process is straightforward, and with a bit of dexterity and avoiding excessive force, it can be completed. After replacement, there's a noticeable improvement in cabin air quality, reducing the risk of dust allergies. It's recommended to check it quarterly and wipe the filter slot with a neutral cleaner. Beginners can definitely give it a try, as there are plenty of video tutorials available, saving time and money, and the operation is safe and reliable.

[Dorothy]

I always consider respiratory safety when changing the filter. The Zotye SR7's filter is hidden behind the glove box. Park the car, turn on the air conditioning system, and empty the glove box to locate the filter cover panel. Unclip or unscrew it, then gently remove the old filter and discard it. Replacing it with a high-quality filter can block PM2.5, and changing it every three months prevents bacterial growth. Wear gloves and a mask during the operation to ensure hygiene, making it worry-free and protective for your family.