How to Remove the Air Conditioning Filter in a Golf?
3 Answers
The steps to replace the air conditioning filter in a Golf are: 1. Locate the air conditioning filter position under the glove compartment; 2. Use a screwdriver to remove the screws on the partition plate and take off the partition; 3. After seeing the air conditioning filter cover, remove it to take out the air conditioning filter; 4. Install the new air conditioning filter, reattach the cover, restore the partition to its original state, and tighten the screws. The Golf is a compact car with body dimensions of: length 4296mm, width 1788mm, height 1471mm, wheelbase 2636mm, fuel tank capacity 51 liters, and trunk capacity 380 liters.
When I first learned to replace the cabin air filter, I found the disassembly process for the Golf not too difficult, but it does require patience. Open the passenger door, squat down, and look under the glove compartment—there are several plastic clips or small screws there. Use a regular screwdriver to gently loosen the clips or press them open by hand, and the entire glove compartment will come off. Inside, there’s a black rectangular slot with a cover. Simply open the cover to pull out the old filter. Remember, the filter has an arrow marking indicating the airflow direction—don’t yank it too hard when pulling it out to avoid damage. Beginners are advised to follow a high-definition tutorial online or ask a friend for help to prevent cracking the plastic parts. After replacement, remember to clean the dust inside the slot; otherwise, the new filter will get dirty quickly, affecting cooling performance. I replace mine every six months—it’s cost-effective and healthier.
As a long-time DIY car repair enthusiast, I find the process of replacing the Golf's cabin air filter extremely straightforward. All you need is a Phillips screwdriver or a plastic pry tool. On the passenger side, move the floor mat aside. The glove compartment usually has left and right clips – just pull down firmly to release them. The filter compartment cover pops open with a simple pry, allowing you to easily pull out the old filter. I always pay attention to the arrow direction and remove it with steady force to prevent dust from flying into my face. Then clean the dust from the compartment before inserting the new filter in the correct orientation. Replacing it every 10,000 kilometers is ideal for maintaining fresh cabin air and optimal AC efficiency. The whole process takes about ten minutes, saving you repair shop fees.
