How to Remove Small Yellow Spots on a White Car?

2 Answers
SebastianMarie
07/24/25 8:11am
Small yellow spots on a white car are caused by tiny metal particles adhering to the car body and rusting over time. Here are several methods to remove them: 1. Wipe with a towel: For small, localized spots, use a damp towel and scrub firmly. 2. Use a cleaning wax: If a damp towel doesn't work, purchase a cleaning wax online, apply it to the towel, and gently wipe the spots away. 3. Get a polishing treatment at a car detailing shop: For extensive spots, the second method can also be used, but it is time-consuming, and using cleaning wax over a large area may damage the paint's gloss. The simplest solution is to spend some money and get a polishing treatment at a car detailing shop.
Was this review help?
6
2
Share
VonRemington
08/11/25 3:48am
My own white car often gets those annoying little yellow spots, which I suspect are caused by iron particles sticking to it when parked near construction sites or roadsides, oxidizing and turning into rust spots. To deal with them, I first rinse the entire car with a high-pressure water gun, then wipe the surface with a neutral car wash soap. When it's half-dry, I spray on an iron remover—when the spots turn purple, it means it's working, and then I rinse it off. If there are any remaining spots, I gently rub them with a car detailing clay to absorb the tiny particles. Finally, I apply a layer of car wax as a protective film to prevent them from coming back. This method works quite well, and I've made it a habit to wash my car every two weeks, parking in dust-free areas to keep it shining like new. Spending a little time saves hassle and ensures safety, and doing it myself saves money too.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

What are the new requirements for roof racks under the 2020 traffic regulations?

Here are the new requirements for roof racks under the 2020 traffic regulations: 1. Heavy-duty vehicles: For heavy-duty and medium-duty trucks and semi-trailers, the height of the load from the ground must not exceed 4 meters, and for vehicles carrying containers, it must not exceed 4.2 meters. 2. Other cargo vehicles: For other motor vehicles carrying cargo, the height of the load from the ground must not exceed 2.5 meters. 3. Motorcycles: For motorcycles, the height of the load from the ground must not exceed 1.5 meters, and the length must not exceed 0.2 meters beyond the body. For two-wheeled motorcycles, the width of the load must not exceed 0.15 meters on either side beyond the handlebars; for three-wheeled motorcycles, the width of the load must not exceed the body. Note: Passenger cars are not allowed to carry cargo except for roof racks and built-in luggage compartments. For passenger cars using roof racks, the height of the load must not exceed 0.5 meters from the roof or 4 meters from the ground.
1
2
Share

Is the 48V Mild Hybrid System Fuel-Efficient?

48V mild hybrid systems are fuel-efficient, as vehicles equipped with this system consume less fuel than pure gasoline-powered cars. The electric motor in a mild hybrid system has relatively lower power and torque, and most of the time, this motor functions to regulate speed or recover kinetic energy. The greatest advantage of the 48V mild hybrid system lies in its optimization of engine start-stop, acceleration, braking, and other driving conditions, leading to significant fuel savings. Firstly, the higher voltage enables a more powerful start-stop motor to drive the engine crankshaft more easily, resulting in shorter system response times and reduced jerky sensations. With a larger-capacity battery and a higher-power motor, the 48V mild hybrid system can perform more functions compared to conventional start-stop systems. For example, during vehicle acceleration or brief stops, the powertrain with a 48V system can operate in pure electric mode, avoiding the fuel-intensive idle phase typical of gasoline-powered cars during startup. Additionally, during braking or coasting, some kinetic energy can be recovered through engine braking, minimizing energy dissipation. Some 48V systems can even temporarily power the air conditioning compressor when the engine is off, preventing the AC from shutting down altogether.
10
5
Share

What is the 0-100 km/h acceleration time of the Changan CS85 COUPE?

The Changan CS85 COUPE's 0-100 km/h acceleration time is 8.3 seconds. The 0-100 km/h acceleration refers to the time it takes to accelerate from 0 to 100 km/h, which is the most intuitive reflection of a car's power. Generally, a 1.6L compact sedan achieves a 0-100 km/h acceleration time between 11 to 13 seconds, while a 2.0T midsize sedan ranges between 7 to 8 seconds. Supercars typically have acceleration times under 3.8 seconds. The Changan CS85 COUPE is equipped with a 2.0L inline 4-cylinder turbocharged engine paired with an 8-speed automatic transmission. This model is also the first domestic brand vehicle to feature the Aisin 8AT transmission. The Changan CS85 COUPE is a coupe-style SUV from Changan's SUV family, launched in March 2019 in Sanya, with four variants: Type, Dynamic, Premium, and Intelligent.
5
0
Share

Is it a traffic violation if I go straight in a tidal flow left-turn lane?

This situation constitutes a traffic violation. All vehicles entering a tidal flow lane must drive according to the traffic light signals. If the lane shows a green light for going straight, you must proceed straight ahead, even if you intended to turn left. Otherwise, it will be considered a violation. Below is more information about tidal flow lanes: 1. A tidal flow lane is a variable lane. Based on different traffic flow conditions during morning and evening rush hours, cities set up one or more lanes where the permitted direction of vehicle travel changes according to the time of day on suitable roads. 2. Specifically, during the morning rush hour when there is more traffic entering the city, the number of lanes for inbound traffic is increased while the number for outbound traffic is decreased. Conversely, during the evening rush hour when there is more traffic leaving the city, the number of outbound lanes is increased while the number of inbound lanes is decreased. 3. Not all vehicles are allowed to use tidal flow lanes. It is reported that large and medium-sized trucks mistakenly entering a tidal flow lane will be fined 1,000 yuan and penalized with 3 demerit points.
11
0
Share

What does the '4S' in a 4S store represent?

4S store '4S' respectively refers to Sale (sales), Sparepart (spare parts), Service (after-sales service), and Survey (information feedback). The full name of a 4S store is Automobile Sales Service 4S store (Automobile-Sales-Servicshop-4S). Sale (sales), it represents the ability to provide consumers with services such as viewing cars, test driving, and purchasing cars, which is the most basic service item that a 4S store must have. Service (after-sales service), it represents that after the vehicle is sold, it can also provide consumers with after-sales warranty and maintenance services. This is also one of the essential service items of a 4S store. Sparepart (spare parts), it represents that in addition to providing consumers with vehicle sales and after-sales services, the 4S store can also provide consumers with vehicle spare parts supply services. Survey (information feedback), as the final terminal of automobile sales for car manufacturers, 4S stores have the closest relationship with consumers and can provide information feedback to car manufacturers.
4
1
Share

What is the fuel tank capacity of the Volvo V90?

Volvo V90 has a fuel tank capacity of 67L, which is the officially announced data. The recommended fuel grade for Volvo V90 is 95, with a fuel consumption of 7.9L per 100 kilometers. A full tank can cover a distance of 848km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. The fuel level is usually observed through the fuel gauge in the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safety limit, and there is still some space from the safety limit to the tank opening. This space is designed to allow for fuel expansion when the temperature rises, preventing overflow from the tank. If fuel is added up to the tank opening during refueling, the actual refueling amount may exceed the calibrated tank capacity.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.