How to Remove Paint from Another Car on Your Own Vehicle?

What are the reasons for the lack of hot air from the rear air vents of the Buick GL8?

The reasons for the lack of hot air from the rear air vents of the Buick GL8 are: 1. The valve of the rear air vent is faulty, resulting in poor opening; 2. The pipeline is damaged; 3. The duct or air filter is clogged. Taking the 2021 GL8 as an example, it is an MPV with body dimensions of: length 5238mm, width 1878mm, height 1776mm, wheelbase of 3088mm, and a body weight of 1880kg. The 2021 GL8 features a front MacPherson independent suspension, a rear torsion beam non-independent suspension, front-wheel drive, and is equipped with a 2.0T turbocharged engine with a maximum horsepower of 237PS, maximum torque of 350Nm, maximum power of 174kW, paired with a 9-speed automatic transmission.

13

0

Share

Where is the computer connector of BAIC Weiwang m20 located

BAIC Weiwang m20 computer connector is located under the co-pilot blower. The following is the relevant introduction about the computer connector: 1. After the car fails, it needs to be detected by the computer, then it needs to be connected with the OBD interface on the car. OBD is a 16-pin connector. 2. When the system fails, the fault (MIL) light or check engine (Check-Engine) warning light will light up, and the powertrain control module (PCM) will store the fault information in the memory. The fault code can be read from the PCM through a certain procedure. 3. Its common function is to detect the failure of parts and systems at any time. When a failure is detected, an alarm is given through the alarm indicator light on the instrument panel.

15

1

Share

What does it mean when the TC light on the Malibu XL dashboard is on?

The TC indicator light on the Malibu XL dashboard, usually yellow, indicates that there is a fault with the traction control system or it has been turned off. Here is more information about the TC indicator light: 1. Meaning: TC stands for Traction Control System, which translates to the trace anti-skid control system in Chinese. 2. Function: The purpose of the TCS system is to maintain the vehicle's trajectory to match the driver's control. 3. Working principle: When accelerating, if the driving force is reduced and wheel slip is detected, the TCS system will send a signal to the engine control computer to reduce engine output and control the braking system, preventing wheel slip and allowing the vehicle to return to its normal direction and follow the original trajectory.

8

1

Share

How to Reset the Maintenance Light on Dongfeng Honda Vezel?

Method to reset the maintenance light on Dongfeng Honda Vezel: 1. Press the "A" button and step on the brake pedal, neither of which should be released midway. 2. Do not start the engine, but the vehicle's power must be turned on. 3. At this point, the dashboard or characters will start flashing. 4. Continue holding down the reset button "A" until "..." appears on the display screen. 5. Release the brake pedal and the "A" button. 6. Turn off the vehicle's power to complete the maintenance light reset. Below is more information about the Dongfeng Honda Vezel: 1. The Honda Vezel is an SUV developed from the chassis of the new Honda Fit. 2. The exterior design of the Honda Vezel largely adopts the front fascia of the new-generation Honda Fit, featuring LED headlights that are popular in compact cars.

1

2

Share

Where is the reverse light fuse located in the new Santana?

The fuse for the reverse light in the new Santana is located in the center position of the fuse box. The fuse box is situated above the right side of the clutch pedal in the driver's seat. Simply remove and open the fuse box to locate the reverse light fuse. Below is more information about the Santana: 1. The Santana is a brand car produced by Volkswagen in California, USA. 2. The new Santana completely abandons the boxy styling of the 1970s seen in the old model, replacing it with a more modern and stylish dynamic design, which now features the latest appearance of the Volkswagen family. 3. The new Santana is equipped with EA211 series engines with displacements of 1.4L and 1.6L. Among them, the 1.4L engine has a maximum power of 66kW, while the 1.6L engine reaches 81kW, and both adopt a lighter all-aluminum structure.

11

0

Share

Where is the Corolla Crankshaft Position Sensor Located?

Corolla crankshaft sensor is installed at the front right side of the engine near the pulley. More information about the crankshaft position sensor is as follows: 1. The working principle of the crankshaft position sensor is to provide signals for ignition timing (ignition advance angle) and confirm crankshaft position, used to detect piston top dead center, crankshaft rotation angle and engine speed. 2. The function of the crankshaft position sensor is to determine the position of the crankshaft, namely the rotation angle of the crankshaft and engine speed. 3. The crankshaft position sensor is usually installed at the front end of the crankshaft (near the pulley), rear end of the crankshaft near the flywheel, or middle of the crankshaft. In early models, it was also installed inside the distributor, being one of the most important sensors in the control system.

15

3

Share

How to Remove Paint from Another Car on Your Own Vehicle?

What are the reasons for the lack of hot air from the rear air vents of the Buick GL8?

Where is the computer connector of BAIC Weiwang m20 located

What does it mean when the TC light on the Malibu XL dashboard is on?

How to Reset the Maintenance Light on Dongfeng Honda Vezel?

Where is the reverse light fuse located in the new Santana?

Where is the Corolla Crankshaft Position Sensor Located?

What Causes the Hissing Sound When Braking?

Where is the headlight cleaning switch for the Q5?

Is It Legal to Modify Brake Calipers?

What is a C5 driver's license?