How to Remove Paint Dots from Car Surface?

How to Drive the Chery Ant EV?

Chery Ant driving procedure: First, fasten the seatbelt, shift the gear, press the brake, and turn the key clockwise to the start position until all self-check lights on the dashboard illuminate; wait for 5 seconds until all self-check lights turn off, continue turning clockwise to the end and release, confirm that the READY light is on, indicating the vehicle has started; check the remaining range; switch to D gear, release the handbrake, and release the brake to start moving. Below is the relevant information about the Chery Ant: 1. The new model of Chery Ant eQ1 under Chery New Energy has officially been launched. The new car largely continues the styling of the current model, with only minor changes in details. It still comes with a 35kWh power battery pack, offering a comprehensive range of 301km. 2. In terms of appearance, the new car basically follows the design of the current model, maintaining a compact and cute look. The front fog light area features vertical daytime running lights, paired with the design of the front grille, giving the car a high recognition rate. The side and rear of the car are identical to the current model, also equipped with a set of 15-inch double four-spoke two-tone aluminum alloy wheels, with tire specifications of 165/65R15. The new Chery Ant eQ1 only differs from the current model by using blue decorations on the front logo. 3. The interior, like the exterior, continues the current design style, with a black and orange color-blocking design. The combination of a three-spoke multifunction steering wheel and a large central control LCD screen is a familiar sight. Compared to the current model, the new car has differences in the knob gear shift, air conditioning vents, and door panel decorative strips, with the new model adding orange borders as accents.

6

3

Share

How Often Should the Coolant Be Replaced in a New Car?

The coolant in a new car should be replaced approximately every 2 years or 40,000 kilometers. If the coolant changes color or sediment appears, it also needs to be replaced. Below are methods for checking the coolant level and an introduction to the functions of coolant. Methods for checking the coolant level: When locating the coolant reservoir, you will see two scale lines, marked MAX and MIN. As long as the level is between these two lines, it is acceptable. If the level is below the minimum scale line, coolant needs to be added. When adding coolant, refer to the vehicle's manual for the specified coolant freezing point to ensure the correct type is used. Wait until the car has cooled down before adding coolant, as some coolant reservoir caps also serve as radiator caps. Opening them while the engine is hot can cause the coolant to spray out, leading to burns. Functions of automotive coolant: It provides anti-corrosion protection for components in the cooling system. It prevents scale buildup, avoiding a reduction in the radiator's heat dissipation efficiency. It ensures the engine operates within the normal temperature range.

15

1

Share

Which is better for a car driver's license, C1 or C2?

Most people obtain a C1 driver's license. Here are the reasons for choosing a C1 license: 1. Regarding the difference between the two, a C1 license allows you to drive both manual and automatic transmission cars, while a C2 license only permits driving automatic transmission cars. Analyzing the current trend, more and more people are buying automatic transmission cars because they are simpler to operate, especially for novice drivers. Operating an automatic transmission car does not require the same level of technical proficiency as a manual transmission car. From this perspective, choosing a C2 license might be sufficient. 2. However, in daily life, if you need to drive a manual transmission car—for example, when your own car is being repaired—a C2 license would not allow you to do so. From this standpoint, a C1 license still holds an advantage. In terms of the examination process, both licenses require passing from Subject 1 to Subject 4.

14

3

Share

What does 360-degree panoramic imaging mean?

360-degree panoramic imaging means: Through the infotainment display installed in the vehicle's center console, observe the 360-degree panoramic environment around the vehicle, with an ultra-wide viewing angle and real-time image information. More information about 360-degree panoramic imaging is as follows: 1. 360-degree panoramic imaging helps drivers park their vehicles more intuitively and safely, also known as panoramic imaging or panoramic reversing imaging system. 2. The 360-degree panoramic imaging system also has defects, especially during rainy or snowy weather, when it is necessary to rely on experience to observe the surrounding environment of the vehicle and not blindly trust electronic products.

11

2

Share

Does the Cavalier have airbags?

The Cavalier is equipped with airbags. Here is the relevant information: 1. Except for the top-of-the-line automatic Xinshang version, which adds front side airbags, all other models only have driver and passenger airbags. In the event of a collision, the airbags distribute the impact force evenly across the head and chest, preventing direct contact between the passenger's body and the vehicle, significantly reducing the likelihood of injury. 2. The automotive airbag system (referred to as SRS) is a supplementary safety system, typically serving as an auxiliary safety device alongside seat belts. Airbags and seat belts are designed to work together; without seat belts, the safety effectiveness of airbags is greatly diminished.

4

0

Share

What is the correct way to warm up a Roewe RX5?

The correct way to warm up a Roewe RX5 is: First, start the vehicle and let it idle for about a minute, then begin driving slowly. Once the water temperature reaches the normal level, you can drive according to your usual habits. Below is some related information about warming up the car: 1. The main reason for warming up the car is that after prolonged parking, the engine oil flows back into the oil pan at the bottom of the engine. Therefore, when starting, the upper part of the engine is in a state without oil and lacks lubrication. It takes about 30 seconds after starting for the oil pump to circulate the oil to the parts that need lubrication the most, such as the pistons, connecting rods, and crankshaft. 2. Both summer and winter require warming up the car, with winter requiring a longer warm-up time than summer. After a night of inactivity, the lubricating oil on the friction surfaces of the engine has mostly dissipated, losing its protective oil film. Low temperatures increase the viscosity of the lubricating oil, reducing its adhesion and fluidity, which increases the resistance during engine startup. Driving under these conditions will increase the engine's load and cause unnecessary wear. 3. Research from authoritative institutions shows that the wear during cold starts accounts for about half of the total wear. Proper idling to warm up the car can reduce this wear, thereby extending the engine's lifespan. At low temperatures, metals exhibit reduced elasticity and wear resistance. Only at normal operating temperatures can the engine achieve the proper clearance and maintain optimal performance.

8

2

Share

How to Remove Paint Dots from Car Surface?

How to Drive the Chery Ant EV?

How Often Should the Coolant Be Replaced in a New Car?

Which is better for a car driver's license, C1 or C2?

What does 360-degree panoramic imaging mean?

Does the Cavalier have airbags?

What is the correct way to warm up a Roewe RX5?

Should the AC Switch Be Turned On When Using Car Air Conditioning in Winter?

What to Do When the Car Window Won't Close?

Does the Highlander meet China 6 emission standards?

How to reset the maintenance light on a Haval F5?