How to Remove Odors from a New Lynk & Co 01?

2 Answers
MacGabriella
07/25/25 12:38am
Methods to remove odors from a new Lynk & Co 01: 1. Open the windows, and if necessary, open the doors to allow air exchange between the inside and outside of the car. When driving, open the windows for ventilation if conditions permit. 2. Place peeled fruit skins like pomelo or orange peels inside the car. 3. Fill a narrow-necked bottle with vinegar and secure it in a part of the car to remove odors, or use tea leaves which also have odor-removing properties. 4. Place activated charcoal inside the car, as it can also help eliminate odors and harmful gases. Generally, new cars come with plastic protective films on the interior, seats, and components. Owners should promptly remove these films as they can contribute to odors. These films block the natural airflow of the seats' own scents, making it difficult to effectively eliminate odors inside the car.
Was this review help?
15
2
Share
MacAliyah
08/10/25 3:49pm
When I first got my Lynk & Co 01, I was also bothered by the new car smell. The most effective method I found through personal experience was ventilating by opening windows and sun exposure. Every morning before leaving, I'd lower all four windows slightly to leave gaps, then park it under strong sunlight for two hours at noon - the chemical volatiles from leather seats and dashboard would dissipate remarkably fast. I always kept several packs of activated charcoal in the trunk and placed some bamboo charcoal dog decorations on the center console. Though these physical adsorption methods work slowly, they have no side effects. Whenever possible, I'd turn on the air conditioning's external circulation for ventilation, especially useful during rainy days when windows couldn't be opened. After consistently doing this for about three weeks, the pungent odor in the car basically disappeared. Remember not to use air fresheners to mask the smell, as they can actually increase formaldehyde concentration.
Was this review help?
13
1
Share
Expand All
More Forum Discussions

What does the pressure gauge pointer indicate for normal pressure in a fire extinguisher

The pressure gauge pointer of a fire extinguisher indicates normal pressure when it is in the green zone. The normal pressure value of a fire extinguisher is approximately between 1.2—1.5 MPa. If the pointer is in the red zone, it means the pressure inside the cylinder is insufficient, indicating the fire extinguisher cannot be used normally. If the pointer is in the yellow zone, it indicates overpressure, meaning the pressure is too high and poses a potential danger (however, slight overpressure may still be considered normal). Relevant information about fire extinguishers is as follows: 1. Introduction: A fire extinguisher, also known as a fire cylinder, is a portable firefighting tool. It contains chemicals used to extinguish fires. The fire extinguisher is a sturdy metal cylinder filled with water or fire-extinguishing materials. 2. Working Principle: When the lever at the top of the cylinder is pressed, the high pressure generated forces the extinguishing agent inside the cylinder out, similar to how a spray can ejects its contents. The function of a fire extinguisher is to displace air, depriving the fire of oxygen and thus extinguishing it.
2
1
Share

What is the difference between a DSG transmission and an AT transmission?

The differences between a DSG transmission and an AT transmission are as follows: 1. AT: The torque converter is the most distinctive component of an AT transmission, consisting of components such as the pump wheel, turbine, and guide wheel, which directly input engine power to transmit torque and perform clutch functions. The pump wheel and turbine form a working pair, similar to two fans placed opposite each other, where the wind generated by one active fan drives the blades of the other passive fan to rotate, with the flowing air—wind—serving as the medium for kinetic energy transmission. 2. DSG: The DSG transmission is distinctly different from traditional automatic transmissions, as the DSG does not use a hydraulic torque converter from the outset. This transmission was not developed based on the conventional concept of an automatic transmission. The engineers who designed the DSG took an innovative and entirely new technological path, cleverly combining the flexibility of a manual transmission with the convenience of a traditional automatic transmission.
11
1
Share

What is the phenomenon of drivers using their eyes, ears, hands, and feet simultaneously while driving?

Drivers using their eyes, ears, hands, and feet simultaneously while driving is known as attention allocation. Here is relevant information: 1. Driving precautions: Suburban roads: There are many intersections, so be cautious of motorcycles and bicycles suddenly appearing from side roads. Avoid driving too close to the right boundary of the road and maintain sufficient safety distance. When pedestrians (especially the elderly or children) are present, remain highly alert, keep a safe distance, and control your speed. 2. "Three precautions": Pay attention to food hygiene: Due to the mobile nature of driving jobs, always choose clean and hygienic restaurants when dining to prevent infectious diseases. Pay attention to rest: Ensure adequate sleep to stay energetic and focused, enabling safe driving. Maintain a safe following distance: While driving, keep sufficient longitudinal and lateral safety distances, always be aware of the movements of vehicles and pedestrians, and avoid following the vehicle ahead too closely or driving side by side to prevent rear-end collisions and side-swipe accidents.
18
0
Share

Is It Normal for the BMW X1 Chassis to Be Abnormal?

Abnormalities in the BMW X1 chassis are not normal and require inspection and repair. The reinforcement components of the BMW X1 chassis are arranged quite symmetrically and neatly, with a ground clearance of 170mm, an approach angle of 18°, and a departure angle of 22°. Below is a detailed introduction to the BMW X1: 1. Overview: The BMW X1 is a compact SUV from BMW. The vehicle dimensions are 4454mm × 1798mm × 1545mm, with a wheelbase of 2760mm. The trunk volume ranges from 420L to 1350L. Fuel consumption is 8.50L/100km (2.0L manual) or 9.20L/100km (2.0L automatic). 2. Other Features: The engine types include 2.0L-L4 and 3.0L-L6 engines. The standard seating capacity is 5. The top speed is 295km/h. The seat material is leather. The acceleration time is 7.6-10 seconds (0-100km/h). The drive modes are rear-wheel drive or four-wheel drive. The vehicle weight is 1685 kilograms.
9
0
Share

Will running a yellow light be captured by traffic cameras in 2021?

It is possible to be captured by traffic cameras. If you accidentally run a yellow light but stop immediately just after crossing the stop line, you may avoid penalties. Typically, traffic cameras take three photos as evidence. Here are the details: 1. Criteria for running a yellow light: Vehicles should slow down when approaching a yellow light. Accelerating may be considered as attempting to run the yellow light. If any part of the vehicle has crossed the stop line when the yellow light turns on, the vehicle can continue without being penalized. However, if the vehicle hasn't crossed the stop line and continues moving, it will be considered as running a yellow light. 2. Legal basis: According to Article 38 of the Road Traffic Safety Law, vehicles are allowed to proceed when the green light is on, but turning vehicles must not obstruct straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue. Vehicles approaching the intersection when the yellow light turns on should stop if they haven't crossed the stop line. Running a yellow light is considered a violation of traffic signals, and the penalties for running a yellow light are the same as those for running a red light under the new regulations.
9
3
Share

Is it problematic to reverse at a highway entrance?

Reversing at a highway entrance will result in an immediate deduction of 12 points from your driving license. According to the relevant provisions of the Road Traffic Safety Law, reversing or driving in the wrong direction on a highway not only incurs a fine but also results in a full 12-point penalty. This means that the offending driver must participate in road safety knowledge training and an examination organized by the traffic management department. Only after passing the exam can the driver regain their driving qualification. When driving normally on a highway, motor vehicles must adhere to the following regulations: 1. No reversing, driving in the wrong direction, crossing the central divider to make a U-turn or turn; 2. No test driving or learning to drive a motor vehicle; 3. No overtaking or parking on ramps, acceleration lanes, or deceleration lanes; 4. No riding or pressing on lane dividers or continuously driving in the overtaking lane; 5. No overtaking on the right; 6. Except in cases of encountering obstacles, vehicle malfunctions, or other situations requiring a stop, no arbitrary stopping, picking up or dropping off passengers, or loading/unloading goods is allowed; 7. Except for entering or exiting emergency stopping areas and road shoulders due to parking, no driving is allowed on emergency stopping areas and road shoulders.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.