How to Remove Odor from the Car?

1 Answers
JustinMarie
07/29/25 8:08pm
Here are methods to eliminate odor from the car: 1. Ventilation: Increase ventilation to help dissipate the odor. 2. Odor Removal: Place materials like Ye Guang Ni in the car to better remove harmful substances caused by odors. 3. Fruit Peels: Use items such as coffee beans or pomelo peels to neutralize odors. Below is additional information: 1. Ventilation: The simplest way to eliminate car odor is frequent ventilation, along with placing odor-absorbing materials in the car. 2. Bamboo Charcoal Bags: Bamboo charcoal bags can absorb odors due to their porous structure, which traps particles. They are also inexpensive and take up minimal space in the car.
Was this review help?
7
5
Share
More Forum Discussions

What are the differences between Nissan Teana and German Superb?

Here are the specific differences between Nissan Teana and German Superb: 1. Brand: Nissan Teana belongs to Dongfeng Nissan brand; German Superb belongs to SAIC Skoda brand. 2. Body structure: Nissan Teana is a 4-door sedan; German Superb is a 5-door hatchback. 3. Engine: Nissan Teana is equipped with a CVT transmission; German Superb is equipped with a 7-speed DSG transmission. 4. Dimensions: The length, width, and height of Nissan Teana are 4901mm, 1850mm, and 1447mm respectively; The length, width, and height of German Superb are 4869mm, 1865mm, and 1489mm respectively.
2
4
Share

Can a 10-year driver's license be replaced with a lifetime one?

A 10-year driver's license can be replaced with a lifetime one, but certain conditions must be met. The specific conditions and annual review are as follows: To obtain a lifetime valid driver's license, the following conditions must be met: After obtaining the driver's license for the first time, the validity period is 6 years. Only if the driver has not accumulated 12 penalty points in any of the 6 consecutive scoring cycles, the new license obtained upon renewal after the expiration of the validity period will be upgraded from a 6-year validity period to a 10-year validity period. After obtaining the 10-year validity driver's license, only if the driver has not accumulated 12 penalty points in any of the 10 consecutive scoring cycles, the new license obtained upon renewal after the expiration of the validity period will be upgraded from a 10-year validity period to a lifetime valid driver's license. Driver's license annual review: No annual review is required during the 6-year validity period of the driver's license. The driver should go to the local traffic police branch to renew the license within 90 days before the expiration date; drivers holding Class A, B, N, or P licenses, although no longer required to undergo annual review during the validity period, should go to the Vehicle Management Section of the local traffic police branch within 15 days of the original annual review deadline to obtain the "Motor Vehicle Driver's License Application Form," fill it out as required, attach a photo, undergo a medical examination at the designated hospital, and then submit the form back to the Vehicle Management Section for computer confirmation; drivers aged 60 and above, regardless of the type of license held, must go to the Vehicle Management Section of the local traffic police branch during the original annual review period each year to obtain the "Motor Vehicle Driver's License Application Form," undergo a medical examination at the designated hospital, and then submit the form back to the Vehicle Management Section for computer confirmation.
15
3
Share

What is a Shock Absorber?

Shock absorbers are wear-prone components in automobiles. Their performance directly affects the smoothness of the vehicle's ride and the lifespan of other mechanical parts. Therefore, it's essential to maintain shock absorbers in good working condition. Below is relevant information about shock absorbers: 1. Function: The shock absorber (Absorber) is primarily used to dampen oscillations from spring rebound after absorbing shocks and impacts from the road surface. When driving on uneven roads, while suspension springs can filter out road vibrations, the springs themselves still undergo reciprocating motion. The shock absorber serves to suppress this spring oscillation. If the shock absorber is too soft, the vehicle body will bounce excessively; if too hard, it creates excessive resistance, hindering the spring's normal operation. 2. Matching: During suspension system modifications, stiff shock absorbers should be paired with stiff springs. Since spring stiffness is closely related to vehicle weight, heavier vehicles generally use stiffer shock absorbers. The device connected to the vibration-damping crankshaft is used to counteract torsional vibrations of the crankshaft (the phenomenon where the crankshaft twists due to cylinder ignition impacts).
8
0
Share

How is the tire cycle calculated?

The tire cycle is usually marked on the outside of the tire. There are numbers engraved on the tire sidewall. The last four digits of this mark indicate the production date. For example, if the last four digits are 0813, it means the tire was produced in the eighth week of 2013. Based on the date conversion, the tire was produced at the end of February. Below is relevant information about tires: 1. Function: The tire is one of the important components of a car. It directly contacts the ground and, together with the car's suspension system, mitigates the impact experienced during driving. A good tire ensures excellent adhesion between the wheel and the road surface, thereby improving the car's traction and driving performance. 2. Different cars have different tires: The car's tires need to bear the weight of the car when it is unloaded and fully loaded, so vehicles of different weights have different tires. Some models are also equipped with spare tires, which are divided into full-size spare tires and non-full-size spare tires. Full-size spare tires are the same as the original tires, while non-full-size spare tires can only be used as temporary replacements.
12
0
Share

How to Check the Average Fuel Consumption of Geely Binyue?

You can use the multifunction steering wheel to display the vehicle's average fuel consumption on the instrument panel. Here is an introduction to the Geely Binyue: 1. Combined Fuel Consumption: The combined fuel consumption of the Geely Binyue ranges between 6.3-8.2L. 2. Model: The Binyue is the first compact SUV based on Geely's BMA architecture. 3. Powertrain Configuration: It is equipped with a 1.5T turbocharged engine, which delivers a maximum power of 177 horsepower and a maximum torque of 255 Nm. 4. Transmission System Configuration: The engine is paired with a 7-speed wet dual-clutch transmission. 5. Engine: This engine was jointly developed by Geely and Volvo, specifically a three-cylinder engine. 6. Body Dimensions: The length, width, and height are 4330*1800*1609mm, with a wheelbase of 2600mm.
11
3
Share

What is the tire model of the Volkswagen Lavida?

The tire model of the Volkswagen Lavida is 205/55R16. Below are the detailed specifications of the Volkswagen Lavida: 1. Interior Features: The high-end models include ambient lighting. Depending on the variant, the Lavida is equipped with features such as ACC adaptive cruise control, an 8-inch central control screen, automatic dual-zone air conditioning, air filtration, seat heating, an electronic parking brake, and auto hold. 2. Powertrain: The Lavida is powered by two engines from the EA211 series: a 1.5L and a 1.4T. The maximum power outputs are 85kW (116PS) and 110kW (150PS), respectively, with peak torques of 150N·m and 250N·m. The 1.5L engine is a new addition, replacing the previous 1.6L engine, and offers a combined fuel consumption as low as 5.5L per 100km. The 1.5L engine is paired with either a 5-speed manual or a 6-speed automatic transmission, while the 1.4T engine comes with a 7-speed dual-clutch transmission.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.