How to Remove Odor from a New Magotan?

The Difference Between Low Beam and High Beam Headlights

The differences between low beam and high beam headlights are as follows: 1. The high beam is at its focal point, emitting light in parallel rays that are more concentrated and brighter, capable of illuminating distant and high objects; the low beam is beyond its focal point (between 1x and 2x the focal length), emitting light in a divergent state, capable of illuminating a larger area of nearby objects. 2. Low beam is designed for short-distance illumination (approximately 30~40 meters), with a design requirement for a wide illumination range and short distance, and the focus cannot be adjusted; high beam is designed for long-distance illumination, with a longer range and greater brightness.

19

5

Share

What Causes Car Shaking During Hard Acceleration?

Car shaking during hard acceleration can be attributed to the following causes and solutions: 1. Dirty throttle body or excessive carbon buildup in fuel injectors and intake manifold. Solution: Clean the throttle body, fuel injectors, and intake manifold. 2. Incomplete fuel combustion in cylinders. Solution: Clean the fuel system and switch to higher-quality gasoline with a higher octane rating. 3. Engine malfunction. Solution: It is recommended to send the vehicle to a 4S shop as soon as possible for professional diagnosis and repair based on the actual condition. 4. Bulges or foreign objects on the tread of any of the four tires. Solution: Clean the tires, or replace them if the damage is severe.

15

5

Share

What are the precautions for encountering rain in the third driving test?

Here are the precautions for the third driving test in rainy weather: 1. Stop if visibility is poor: Driving in heavy rain with poor visibility is the biggest hazard. Even with the wipers on high speed, they cannot clear the rainwater on the windshield, making it impossible for the driver to see ahead. In such cases, it's best to pull over to the side of the road and wait, while turning on the hazard lights. 2. Driving through waterlogged areas: When passing through waterlogged sections, observe how other vehicles are navigating to avoid deep potholes and other obstacles. If the water level submerges the exhaust pipe, be cautious of water entering it. To prevent this, shift to a low gear before entering the water and maintain a steady, higher speed to drive straight through. After driving through waterlogged areas or in heavy rain, the brake pads may become wet, reducing braking efficiency or even causing brake failure. To address this, lightly press both the accelerator and brake pedals while driving at low speed to heat the brake pads and evaporate the moisture. 3. Navigating muddy sections: When driving through muddy areas, focus on preventing skidding and getting stuck. Always follow the tracks of the vehicle ahead. Shift to a low gear before entering the muddy section and avoid changing gears midway. 4. Brake earlier in the rain: The braking distance on wet and muddy roads can be up to three times longer than on dry roads. Therefore, brakes are not as responsive in rainy weather as in normal conditions. For safety, apply the brakes earlier than usual.

7

2

Share

Where is the VIN number of Audi A6 located?

Audi A6 has the following three methods to check the vehicle's VIN number: 1. Open the engine hood, and there is a black plastic plate in the upper right corner of the engine compartment. Remove the plastic plate to see the VIN number. 2. It can be seen next to the wiper on the front windshield of the vehicle, and it is also on the floor mat inside the vehicle. 3. There are mainly two formats for vehicle identification numbers. The first is the ISO3779 standard adopted by the European Union, and the second standard is mainly used in North America, which is more stringent than the first, but the two are still compatible with each other. About the VIN number: The Chinese name for the VIN is the vehicle identification code, which is a set of characters assigned by the manufacturer to identify a vehicle and has unique identification for the vehicle.

16

1

Share

Can Traffic Police Check Information After Passing Subject 4?

After passing Subject 4, it usually takes one or two hours for the system to show that you have passed the exam. Once you have passed Subject 4, your driver's license information will be automatically recorded on the Traffic Police 12123 app. If you are unsure, you can check the exam appointment section. If you click in and see a message saying "You have not registered for the driver's exam," it means you have passed all the tests and just need to wait for your driver's license to be mailed to you. Here are some additional points to note during the period before receiving your driver's license: 1. Even if your driver's license is recorded on the Traffic Police 12123 app but you have not yet received the physical license, you cannot drive on the road. You must wait until the license is delivered. According to traffic police regulations, driving a motor vehicle on the road requires carrying a driver's license. If you are caught without it, you will be penalized with one demerit point per violation, and in severe cases, your vehicle may be impounded. 2. During the probationary period, your vehicle must display a "Novice Driver" sign at the rear. If you need to drive on the highway during the probationary period, you must be accompanied by an experienced driver with more than three years of driving experience in the passenger seat. Driving alone on the highway is prohibited by law.

8

5

Share

How to Check if the Fuel Tank is Full or Not?

Both analog and digital fuel gauges require the vehicle to be started before taking a reading. The analog fuel gauge is marked with two letters, E and F. E stands for Empty, indicating the tank is empty; F stands for Full, indicating the tank is full. The closer the needle is to the letter F, the more fuel remains; the closer it is to the letter E, the less fuel remains. When the fuel icon lights up, it indicates that there is not much fuel left, and refueling is needed as soon as possible. Here are some additional details: 1. Function of the fuel gauge: The fuel gauge provides a rough estimate of the fuel level and cannot display the exact remaining amount, serving only as a reference for the driver. For example, a digital fuel gauge might show a remaining range of 300 kilometers, but in reality, due to factors like vehicle condition and road conditions, the actual range might only be 150 kilometers. 2. Components of the fuel system: The fuel system mainly consists of four parts: the fuel gauge, sensor circuit, variable resistor, and float. When the fuel tank is full, the resistance value of the variable resistor connected to the float decreases, and the circuit current reaches its maximum. At this point, the fuel gauge needle is at its highest position. As the fuel level decreases, the resistance value of the variable resistor increases accordingly, the circuit current decreases, and the fuel gauge needle also lowers.

16

1

Share

How to Remove Odor from a New Magotan?

The Difference Between Low Beam and High Beam Headlights

What Causes Car Shaking During Hard Acceleration?

What are the precautions for encountering rain in the third driving test?

Where is the VIN number of Audi A6 located?

Can Traffic Police Check Information After Passing Subject 4?

How to Check if the Fuel Tank is Full or Not?

Where is the license plate 'Ji D' from?

What Causes the Engine Warning Light to Illuminate in Baojun Vehicles?

Is the Livina a crossover vehicle?

How to Adjust Car Seat Position?