How to Remove Numerous Paint Dots from a Car?

What is the maximum speed of the Tiggo 8?

The maximum speed of the Tiggo 8 is 190 mph. It is a mid-size SUV. Taking the 2020 manual urban version of the Tiggo 8 as an example, its body dimensions are: length 4700mm, width 1860mm, height 1746mm, wheelbase 2710mm, and curb weight 1509kg. The 2020 manual urban version of the Tiggo 8 features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 156ps, maximum power of 115kw, and maximum torque of 230nm, paired with a 6-speed manual transmission.

4

2

Share

Is Roewe a Domestic or Joint Venture Car?

Roewe is a domestic car brand, and its models include: Roewe RX5, Roewe i5, Roewe iMAX8, Roewe i6, Roewe RX8, etc. Taking the 2020 Roewe RX5 as an example, it is a compact SUV with body dimensions of: length 4556mm, width 1855mm, height 1719mm, wheelbase of 2700mm, and a fuel tank capacity of 55L. The 2020 Roewe RX5 is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 169PS, maximum torque of 250Nm, maximum power of 124kW, and is paired with a 6-speed manual transmission.

14

4

Share

What Are the Reasons Why a Car Key Cannot Be Pulled Out?

Car key cannot be pulled out due to the following reasons: 1. When getting off the car, the gear was not shifted to the P position, or the P position was not fully engaged, with something blocking it, thus failing to trigger the electronic sensor; 2. The steering wheel is locked. When parking, the steering wheel was not returned to its proper position, causing abnormal locking of the steering wheel. The solution is to insert the key, then try turning the steering wheel left and right while twisting the key to release the steering wheel; 3. There is a foreign object blocking the slot. The solution is to remove the foreign object, start the car, shift the gear again, and ensure it is fully returned to position, then the key can be pulled out.

16

1

Share

Why Won't the Car Wiper Stop?

The reasons why the car wiper won't stop are: 1. Circuit failure or damage on the line; 2. Damage to the combination switch; 3. The negative pole of the wiper is connected to the car body. The function of the wiper is to remove raindrops and dust attached to the vehicle's windshield to improve the driver's visibility and increase driving safety. Precautions for using the wiper are: 1. Do not park in places with strong sunlight, frost, or excessive dust; 2. On sunny days, do not perform dry wiping without water; 3. If there are hard dirt, leaves, sand, or ice residue on the glass, clean them manually; 4. Reduce the use of the wiper's fast mode; 5. Handle the wiper gently when washing the car or during daily maintenance.

8

1

Share

Do you need to watch during the first car maintenance?

It is advisable to watch during the first car maintenance. After the vehicle enters the maintenance workshop, you can personally follow along to observe the entire maintenance process, especially to supervise the materials used by the maintenance workers and their work attitude. Key points to note for the first maintenance include: 1. Make an appointment in advance; 2. Bring essential items such as the maintenance manual and vehicle registration; 3. Record any faults or questions encountered during daily driving and inform the staff during the first maintenance registration. The first car maintenance items include: 1. Replace engine oil and oil filter, clean the air filter, and check for damage to the generator belt and wiper blades; 2. Check the levels of various fluids; 3. Check tire pressure and look for uneven wear, bulges, or damage; 4. Inspect the car chassis, including brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Check all switches and lights to ensure they are functioning properly.

4

Share

What to Do If Too Much Engine Oil is Added?

The solution for adding too much engine oil is to drain or extract the excess oil. The effects of adding too much engine oil are: 1. It may cause the crankcase to explode; 2. The engine exhaust pipe may emit blue smoke; 3. Piston rings may stick, and fuel injectors may become clogged; 4. It reduces the engine's output power; 5. Oil leakage may occur. The functions of engine oil are: assisting in engine lubrication and reducing friction, cooling and lowering temperature, sealing to prevent leaks, preventing rust and corrosion, and damping vibrations. The method for changing engine oil is: 1. Run the engine to reach operating temperature; 2. Engage the handbrake and lift the vehicle; 3. Unscrew the oil filter and drain the oil; 4. Apply new oil to the gasket of the new oil filter; 5. Pour the new oil into the oil pan; 6. Check for leaks under the engine; 7. Lower the vehicle, check the oil dipstick, and start the engine; 8. Turn off the engine and recheck the oil level.

13

5

Share

How to Remove Numerous Paint Dots from a Car?

What is the maximum speed of the Tiggo 8?

Is Roewe a Domestic or Joint Venture Car?

What Are the Reasons Why a Car Key Cannot Be Pulled Out?

Why Won't the Car Wiper Stop?

Do you need to watch during the first car maintenance?

What to Do If Too Much Engine Oil is Added?

What is the method to distinguish between dry and wet dual-clutch?

What does the license plate number of Suifenhe start with?

How Many Years Can a Private Car Be Driven?

How to Replace Tires with Tire Pressure Monitoring?