How to Remove Marker Stains from a Car?

1 Answers
DiBrianna
07/30/25 8:39am
To remove marker stains from a car, follow these steps: 1. Take a piece of tissue or cloth and use a disposable cup to get some tap water; 2. Dampen the tissue or cloth with a small amount of water and wipe the marked area; 3. After wiping, use a clean tissue to dry any remaining water stains; 4. Then, dampen the tissue or cloth with a small amount of alcohol and wipe the marked area again to remove the marker stains; 5. Finally, use a clean tissue to dry any remaining alcohol. The functions of car paint are: 1. To protect the car from corrosion caused by various atmospheric agents; 2. To decorate the car; 3. To indicate the type of car; 4. To improve the comfort and sealing of the car, preventing noise caused by vibrations.
Was this review help?
17
5
Share
More Forum Discussions

How Often Should You Drive Your Car?

If it's a new car, it should be driven approximately once a month under normal circumstances; if it's an older car that has been used for 5-6 years or more, it's best to drive it once a week, with a maximum interval of no more than two weeks. Generally, a driving time of thirty minutes is sufficient. The effects of prolonged car inactivity are as follows: Battery Drainage: If a car is left unused for an extended period, the car battery will automatically deplete. When the battery is completely drained, the car may fail to start. Prolonged inactivity can also cause oxidation and deterioration of engine oil, brake fluid, antifreeze, and other car components. Tire Deformation: When a car remains stationary for a long time, the tires bear weight on only one contact point with the ground. This constant pressure makes them highly prone to deformation. Keeping the tires in this position for extended periods accelerates aging and leads to deformation. Engine Component Damage: During prolonged parking, due to gravity, the lubricating oil and engine oil in various engine components flow to the bottom. When the car is started again, the lack of lubrication increases friction between parts, causing potential damage. Additionally, starting the engine becomes more difficult.
8
0
Share

Is the Driver's License Number the Same as the ID Card Number?

According to regulations, one ID card can only apply for one driver's license, so the driver's license number is the same as the ID card number. Here is more information about the driver's license number: 1. In a formal driver's license issued by the vehicle management office, it consists of two parts: the main page and the supplementary page. When the traffic police check the driver's license, both the main page and the supplementary page must be complete and intact. The main page and the supplementary page correspond to each other, and the main basis for judgment is whether the name and driver's license number on both pages are consistent. 2. The number below the document name on the main page and supplementary page of the driver's license is the driver's license number. Each driver's license is unique and non-repetitive, similar to an ID card, so the driver's license number uses the ID card number. This creates a certain correlation between the driver's license and the ID card, making it easier for the traffic police to quickly compare the ID card and the driver's license.
19
2
Share

What kind of engine oil does Cadillac use?

For turbocharged engines, it is recommended to use 0w40 or 5w40 full synthetic engine oil. For naturally aspirated engines, it is recommended to use 0w30 or 5w30 full synthetic engine oil. Most models under the Cadillac brand are equipped with turbocharged engines, and for such engines, it is recommended to use full synthetic engine oil with a viscosity of 40. There are three types of engine oil: full synthetic oil, semi-synthetic oil, and mineral oil. Here is some extended information: 1. The base oil of full synthetic engine oil is artificially synthesized, so the molecular size and shape of this oil are regular. Full synthetic oil has good lubrication performance and a long service life. The base oil of mineral oil is refined from petroleum, and the molecular size and shape of this oil are irregular. 2. Mineral oil has a short service life and average lubrication performance. The lubrication performance and service life of semi-synthetic oil are between those of full synthetic oil and mineral oil.
9
2
Share

What Does the Red Exclamation Mark on the Vehicle Dashboard Mean?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard that feature an exclamation mark, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and wiper fault indicator. Below is a detailed introduction to the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the vehicle's general performance, components, or functions. Common issues include parking sensor faults, fuel cut-off system intervention or faults, external light faults, and engine oil pressure sensor faults. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant levels below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle. This represents a brake system warning, primarily indicating a brake system malfunction or low brake fluid levels. Immediate inspection of the brake system is required to avoid accidents. Tire Pressure Anomaly: A horizontal line with parentheses and an exclamation mark below. This represents the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, signaling a fault in the vehicle's lights. Solution: Visit a 4S shop as soon as possible for inspection and repair. Alternatively, you can check yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights, to identify the issue. In addition, during daily vehicle use, the warning lights displayed on the dashboard are divided into two colors, yellow and red, indicating different levels of severity: Yellow indicates a fault in the corresponding system that is not very serious. Reduce speed and proceed to the nearest repair point to address the issue and eliminate potential safety hazards. Red indicates a very serious problem in the corresponding system. If this occurs, do not continue driving. Pull over immediately and seek professional assistance to prevent unforeseen dangers to the vehicle and personal safety. It is important to note that when the car is started, all lights will illuminate as the system performs an automatic check. After the check is completed, the lights will turn off automatically. If a light does not illuminate when the ignition is turned on, remains lit continuously, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly to inspect and eliminate potential safety hazards.
20
2
Share

Is Replacing the Subframe Considered a Major Overhaul?

Whether replacing the subframe counts as a major overhaul mainly depends on the extent of the vehicle's damage. If the subframe is slightly damaged but the chassis remains intact, and the repair shop recommends replacing the subframe, it does not qualify as a major overhaul. However, if the damage is severe due to an accident, affecting the chassis significantly, then it is considered a major overhaul. Here is more information about the subframe: 1. The subframe, also known as the auxiliary frame, is part of the vehicle's chassis structure. Its primary function is to connect and secure components of the suspension system. The body is directly connected to the subframe, which enhances the vehicle's structural strength, reduces the impact of suspension vibrations on the body, and improves ride comfort. It is a crucial component of the vehicle's chassis. 2. Replacing the subframe has minimal impact on the vehicle itself, as long as the new subframe is free of quality issues. If the subframe is damaged and replaced, it will not affect the vehicle's handling or driving stability.
18
2
Share

What Causes Power Loss When the Air Conditioner is On?

The reason for power loss when the air conditioner is on is either a fault in the air conditioning system, such as issues with the thermostat or clutch, or if the air conditioner is functioning normally, it could be due to engine carbon buildup or spark plug failure. Here are detailed explanations of these two points: 1. Engine carbon buildup is a key reason for reduced vehicle power. When carbon deposits accumulate in the engine, the fuel system can become clogged, preventing the engine from operating normally and thus affecting the car's power output. 2. Spark plugs play a significant role, and different materials can achieve varying effects. Replacing spark plugs with high-quality ones not only extends their lifespan but also enhances power output efficiency.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.