How to Remove Fog from Car Windows in Summer?

3 Answers
BrookeLee
08/30/25 6:41am
Methods to remove fog from car windows in summer include: 1. Air conditioning cooling defogging—turn on the air conditioning to blow cold air toward the front windshield, utilizing the dehumidification function to eliminate fog; 2. Detergent-based anti-fogging; 3. Using anti-fog spray—spray the anti-fog agent on the fogged windshield and wipe it dry with a cloth for immediate clarity; 4. Rain visor defogging—utilize a well-designed air deflector to reduce wind resistance, directing airflow toward the side mirrors to accelerate the evaporation of water droplets and fog, clearing the front windshield; 5. External circulation defogging; 6. Rear window heating defogging; 7. Slightly opening the window to allow air convection and reduce temperature differences.
Was this review help?
8
5
Share
MacChristopher
09/12/25 3:44am
Foggy windows in summer while driving are quite common, and I encounter this frequently. The usual solution is to turn on the air conditioning in dehumidification mode, adjust the air vents to blow directly onto the windshield, as cold air dehumidifies fastest to reduce moisture. At the same time, crack open the windows slightly or use the fan to promote air circulation. If the fog forms too quickly, simply wipe the glass surface with a clean microfiber cloth to avoid leaving streaks. For prevention, regularly clean the windows to minimize dust buildup, or apply some anti-fog spray, which forms a protective film on the glass surface for long-lasting effectiveness. Remember, fogging occurs when warm, humid air inside the car meets the cold glass, causing condensation—more likely during summer rains or when the AC is on. Addressing it promptly is crucial to avoid obstructed vision and safety risks. I recommend checking the interior humidity before driving and preemptively turning on the AC if it's high. From my experience, these small habits can save a lot of trouble.
Was this review help?
14
1
Share
Expand All
BradyRose
10/26/25 4:32am
Car window fogging is mainly caused by temperature differences and humidity, and I prefer using technological solutions to deal with it. Turning on the air conditioning with the cold air dehumidification function is the most effective, directing the airflow towards the windows to quickly disperse the fog. If the car has an automatic defogging mode, it's even better to activate it. Additionally, applying a special anti-fog spray on the inner side of the window forms a protective layer that prevents fogging effectively and can last for several weeks. Ventilation is also important—opening the windows or turning on the fan to circulate air reduces moisture buildup. When fogging occurs, avoid immediately turning on the hot air as it can worsen the fogging, especially in summer. I've tried adjusting the angle and intensity of the air vents to avoid direct airflow on people, making it more comfortable. Modern car systems, such as air circulation control, help balance humidity, which I find very convenient. Regularly cleaning the windows and avoiding leaving wet items in the car can also minimize problems, but safe driving is always the top priority.
Was this review help?
9
3
Share
Expand All
More Forum Discussions

What is the operation method of a car steering wheel?

The operation method of a car steering wheel is: 1. Both hands should be placed on the left and right sides of the steering wheel rim respectively, with thumbs naturally extended upward and resting against the rim, and the other four fingers gripping the rim from the outside inward; 2. In this way, the left hand serves as the primary control while the right hand assists, coordinating with each other. When the right hand operates other components, the left hand can still freely perform left and right turns. The steering wheel, also known as the helm, functions to convert the force applied by the driver on the edge of the steering wheel into torque, which is then transmitted to the steering shaft. It mainly consists of a skeleton, foam, and corresponding mounting clips or screw holes for the driver's airbag (DAB). It is a device used to control the direction of the vehicle, enabling straight-line driving or turning by controlling the steering wheels.
11
4
Share

What is the displacement of the Buick 20t?

Buick 20t has a displacement of 1.5 liters. Buick is an automobile brand under General Motors Company. Buick offers models such as Excelle, Verano, Regal, and LaCrosse. Taking the Buick Regal as an example, its body dimensions are 4843mm in length, 1856mm in width, and 1484mm in height, with a wheelbase of 2737mm. The Buick Regal features a contemporary exterior design, a refined and humanized interior, and luxurious high-tech configurations. It is equipped with a high-end V6 engine that perfectly combines powerful performance with smooth and quiet operation, along with outstanding safety features and various luxurious technological amenities, meeting the high demands of social elites for their vehicles.
14
0
Share

What is the method for replacing the air filter in the Magotan B8?

The method for replacing the air filter in the Magotan B8 is as follows: 1. Locate the position of the air filter installed under the glove box on the passenger side; 2. There are two knobs on the cover panel, which can be easily unscrewed without any tools. Remove the cover panel and keep the knobs safely; 3. After removing the cover panel, find the installation position of the air filter, hold it with both hands and slowly wiggle it out, then replace it with a new filter. The main function of the air filter is to help filter out fine impurities and dirt inside the car, thereby providing a more comfortable and superior in-car environment. The Magotan has a body length, width, and height of 4866mm, 1832mm, and 1464mm respectively, with a wheelbase of 2812mm.
15
3
Share

What are the starting steps for an automatic transmission?

Automatic transmission starting steps are: 1. After the driver sits in the driver's seat, directly press the start button; 2. Depress the brake pedal and press the start button to ignite; 3. Release the foot brake and warm up the vehicle while stationary; 4. Depress the brake pedal again and shift to D gear; 5. Release the handbrake and slowly release the foot brake to start moving. Automatic transmission means the driver doesn't need to manually shift gears - the vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. Automatic transmission gears are divided into: 1. P for Parking gear; 2. R for Reverse gear; 3. N for Neutral gear; 4. D for Drive gear; 5. S for Sport mode (high-speed engine braking gear); 6. L for Low gear (low-speed engine braking gear).
6
1
Share

What is the bulb model of the Baojun 360?

The bulb model of the Baojun 360 is 9005, which is a combined high and low beam. The Baojun 360 is a 6-seater family car under SAIC-GM-Wuling, with a body length, width, and height of 4615mm, 1735mm, and 1660mm respectively, and a wheelbase of 2750mm. The Baojun 360 features a highly original exterior design with sharp and prominent body lines, presenting a dignified yet youthful appearance that meets users' diverse daily driving scenarios. Its front face adopts a new hexagonal grille design, paired with eagle-eye headlights. The side profile features a waistline that runs through the front and rear light groups, complemented by lower creases that echo the rear design. Together with the streamlined roof and spoiler, it creates a floating roof style.
1
0
Share

What to Do When the Brakes Fail While Driving?

When the brakes fail while driving, the solution is: the driver should control the direction according to the road conditions and speed, shift from a high gear to a low gear, and simultaneously press the accelerator pedal once. This will create significant traction resistance from the engine, rapidly reducing the vehicle's speed. Additionally, while shifting to a low gear, the handbrake should be used in combination. However, it is important to note that the handbrake should not be applied too tightly or too slowly. Pulling it too tightly may cause the brake disc to lock up, while pulling it too slowly may result in wear and overheating of the brake disc, leading to loss of braking effectiveness. Furthermore, the vehicle's rigid parts, such as the bumper or body, can be used to rub or collide with natural obstacles on the roadside to force a stop and escape danger, thereby minimizing accident losses as much as possible.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.