How to remove ETC without damaging the car film?

Can I switch to automatic transmission after passing the manual transmission subject one test?

You can switch to automatic transmission after passing the manual transmission subject one test. Below are the specific details about the driver's license test: Subject One: Road traffic safety laws, regulations, and related knowledge test. Subject Two: Field driving skills test, which mainly includes: reversing into a parking space, right-angle turns, curve driving, parallel parking, and stopping and starting on a slope. Subject Three: Road driving skills test, which includes basic items such as: preparing to drive, driving in a straight line, changing lanes, passing intersections, pulling over to the side, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and driving at night. Subject Four: Safe and civilized driving-related knowledge test.

15

5

Share

Do You Need to Pull the Clutch When Parking a Motorcycle?

You do not need to pull the clutch when parking a motorcycle, unless the motorcycle is parked in gear. Below are detailed explanations about the motorcycle clutch: Location: The clutch is situated inside the flywheel housing between the engine and the gearbox. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the gearbox. Function: During motorcycle operation, the rider can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine with the gearbox, thereby cutting off or transmitting the engine's power to the gearbox.

5

1

Share

Do RVs Have Toilets and Bathrooms?

RVs have toilets and bathrooms. Here are the specific details about RVs: Introduction: An RV is a special type of vehicle that combines the functions of both a house and a car. It is a mobile unit equipped with essential household facilities. RVs come with furniture and appliances such as beds, refrigerators, cabinets, air conditioning, TVs, and audio systems. They can be divided into areas like the driving zone, living zone, bedroom zone, and kitchen zone. Applicability: RV modifications still belong to a niche market, and it will take time before they become common in ordinary households. Perhaps by providing simple camping options for regular family cars, we can gradually transition to RV-based leisure and vacationing.

1

Share

What is the warranty period for the controller?

The warranty period for the controller is one year. Below are detailed introductions about the controller: Functions: The electric vehicle controller is a core vehicle control unit, featuring functions such as reverse charging protection, stall protection, dynamic and static phase loss protection, cruise alarm, high-speed control, mode switching, and follow-up ABS system. Classification: Structurally, electric vehicle controllers are divided into two types: separated and integrated. The separated type means the main body of the controller is separated from the display part. The latter is mounted on the handlebar, while the main body of the controller is hidden in the vehicle's compartment or electric box, shortening the connection distance between the controller and the power source or motor, resulting in a cleaner vehicle appearance. The integrated type combines the control part and the display part into one unit, housed in a refined dedicated plastic box.

18

1

Share

Is Installing Additional Spotlights on a Motorcycle Considered Illegal Modification?

Installing additional spotlights on a motorcycle is considered illegal modification. Here are specific details about illegal modifications: Regulations: According to Article 10 of the "Motor Vehicle Registration Regulations," if a registered motor vehicle needs to change its usage nature, body color, body or frame, etc., the vehicle owner must apply for modification registration at the local vehicle management office. Modification Actions: Any unauthorized modification of a motor vehicle's chassis, engine, suspension, transmission system, steering system, tires and rims, lights, body color painting, and exterior structure without the approval of the public security traffic management department, as well as any technical data of the motor vehicle that does not match the data announced by the competent department of motor vehicle products under the State Council, is considered a modification action.

14

0

Share

What are the common types of oil pumps?

Common types of oil pumps include gear-type oil pumps and rotor-type oil pumps. 1. Gear-type oil pump: The oil pump housing is machined with an inlet and an outlet. Inside the pump housing, there is a driving gear and a driven gear, with a very small gap between the gears and the inner wall of the housing. The working principle is that when the gears rotate clockwise, the volume of the inlet chamber increases due to the movement of the gear teeth away from the meshing direction, creating a certain vacuum. Lubricating oil is then drawn from the inlet and fills the inlet chamber. The rotating gears carry the oil between the teeth to the outlet chamber. As the gear teeth mesh, the volume of the outlet chamber decreases, increasing the oil pressure, and the lubricating oil is delivered through the outlet to the engine oil passages. 2. Rotor-type oil pump: The pump housing contains an inner rotor and an outer rotor. The inner rotor is fixed to the driving shaft with a key, while the outer rotor’s cylindrical surface fits with the housing, with a certain eccentricity between them. The outer rotor is driven by the inner rotor to rotate. The housing is equipped with an inlet pipe and an outlet. The working principle is that during the rotation of the inner and outer rotors, the tooth profiles of each rotor tooth always make point contact with each other, forming four enclosed working chambers. Since the outer rotor always rotates slower than the inner rotor, the volume of these four working chambers continuously changes. Each working chamber connects with the inlet hole in the housing when its volume is smallest. As the volume increases, a vacuum is created, and when it connects with the outlet hole, the volume gradually decreases, increasing the pressure and forcing the lubricating oil out.

5

1

Share

How to remove ETC without damaging the car film?

Can I switch to automatic transmission after passing the manual transmission subject one test?

Do You Need to Pull the Clutch When Parking a Motorcycle?

Do RVs Have Toilets and Bathrooms?

What is the warranty period for the controller?

Is Installing Additional Spotlights on a Motorcycle Considered Illegal Modification?

What are the common types of oil pumps?

Is the inability to shift gears caused by the clutch plate issue?

Is Zeekr a Subsidiary of Lynk & Co?

Can People with Amblyopia Obtain a Driver's License?

Can I continue turning left after crossing the stop line when the red light turns on?