How to remove ETC stuck on the windshield?
4 Answers
There are two methods to remove an ETC device stuck on the windshield: 1. Use a hairdryer to blow hot air at the area where the ETC device is attached to the windshield, then twist and remove the device; 2. Soak a towel in hot water and place it on the outside of the windshield to heat the adhesive tape behind the ETC device, then remove it. ETC (Electronic Toll Collection) is an electronic toll collection system. Its working principle is: through dedicated short-range communication between the on-board electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, it uses computer networking technology to conduct background settlement processing with the bank, achieving the purpose of vehicles passing through highway or bridge toll stations without stopping to pay toll fees.
Here's a reliable method to remove the adhesive from ETC tags stuck on your windshield. First, use a hairdryer to heat the label for 5 minutes – this softens the glue for easier removal. Then, gently lift the edge using a plastic card or an old credit card. For residual adhesive, wipe with rubbing alcohol by saturating a cloth and evenly cleaning the glass surface. Remember to wear gloves and ensure proper ventilation to avoid health effects from alcohol fumes. Keep the hairdryer at a safe distance to prevent thermal cracks, especially in strong summer sunlight. I've used this method for years and helped neighbors with it several times, always successfully. I've also tried commercial adhesive removers – they're pricier but slightly faster. After completion, don't forget to polish with glass cleaner to restore clarity for unobstructed driving visibility.
I think even beginners can easily handle ETC adhesive removal. Pour some cooking oil onto the residual adhesive, wait 10 minutes for it to penetrate and soften, then gently wipe it off with a soft cloth or sponge. For stubborn adhesive, add some rubbing alcohol and scrub. Be patient during the process and avoid scraping the glass forcefully to prevent scratches. Perform the operation in a cool garage for safety and skin protection. After completion, rinse the glass with clean water to remove any oil residue. I've used this method to save money and be eco-friendly, as kitchen oil is readily available. Don't forget to test a small area first to ensure the glass doesn't react, maintaining your car's appearance while protecting your hands.
Quick and easy ETC adhesive removal. Heat with a heat gun for one minute to soften the glue for peeling. For residual adhesive, spray with alcohol and wipe clean with a wipe. Avoid excessive heating to prevent glass cracking. Tools are readily available, suitable for a fast-paced lifestyle.
