How to Remove Chewing Gum Stuck on the Car Body?

1 Answers
FinnDella
07/29/25 9:10pm
If chewing gum is stuck on the vehicle, you can first use hot air to soften the gum and then remove it. If there are residues, you can continue to remove them using the following methods: 1. White vinegar: Pour a little white vinegar on the gum to soften it, then use cotton or a towel dipped in white vinegar to scrub repeatedly until clean. 2. Alcohol: Dilute alcohol or high-proof liquor with hot water, spray it on the gum residue, and wipe with a towel. 3. Essential balm: Drop a few drops of essential balm on the gum to soften it, then scrub with a wet towel. 4. Egg white: Apply egg white to the gum to loosen it, then wipe it off one by one, and finally clean with a soapy water towel. 5. Tar remover: Purchase and use a tar remover, spray it on the gum to soften it, and then wipe it off with a towel.
Was this review help?
20
1
Share
More Forum Discussions

Can You Still Drive with a Cracked Windshield?

You can drive with a cracked windshield, but you should repair it promptly; otherwise, the repair effectiveness may be compromised. Here are the details: 1. Crack deformation: Cracks can deform the glass due to temperature fluctuations throughout the day, as heating and cooling affect the glass. Continued driving exposes the damaged area to wind resistance, applying ongoing pressure that may enlarge the crack. For instance, a few-millimeter crack in the morning could expand to several centimeters by evening if ignored. Therefore, while driving with a cracked windshield is possible, prompt repair is essential to avoid worsening the damage. 2. Repairable conditions: Only cracks on the outermost layer of glass can be repaired. Generally, repairable crack types include star-shaped and linear cracks. Smaller cracks are preferable for repair; if the crack diameter exceeds 20mm, the repair effect may be poor, and replacing the windshield is recommended.
11
1
Share

Does a car brake the front wheels or the rear wheels?

The car braking system is divided into service brakes and parking brakes. Here are the detailed explanations: 1. Service brakes: Generally, all four wheels are braked together, but the braking force on the front and rear wheels may slightly differ. Braking either applies to the rear wheels or both front and rear wheels together. If the front wheels are not braked properly, there is a risk of strong inertial force causing the rear wheels to lift, leading to a rollover. 2. Parking brakes: Parking brakes commonly include hand brakes and foot brakes. The foot brake is the primary braking mechanism, and typically, all four wheels are braked together, ensuring the car neither jerks forward abruptly nor compromises safety and stability.
10
1
Share

Can I handle traffic violations without bringing my driver's license?

To handle any traffic violation, you must bring the following documents: 1. Driver's license; 2. Vehicle license; 3. ID card; 4. Traffic violation penalty notice (if not available, it's not needed). If you are handling a traffic violation without penalty points, the driver's license is not required. However, the vehicle license must be brought because it serves as the ID card of the motor vehicle. Without the vehicle license, you cannot handle the violation or pay the fine. Below are common traffic violations: 1. Running a red light: This is the most common violation. Since the new traffic regulations were introduced, running a red light results in a 6-point deduction; 2. Driving without a license: If a driver continues to drive while their license is suspended, they will be fined and detained for 15 days. Driving without a license or with a revoked license will result in 15 days of detention and a fine; 3. Overloading or overcapacity: For passenger vehicles exceeding the rated capacity by less than 20% or freight vehicles exceeding the rated load by less than 30%, a fine will be imposed. For passenger vehicles exceeding the rated capacity by 20% or freight vehicles exceeding the rated load by 30%, a fine will be imposed; 4. Drunk driving: Driving under the influence of alcohol will result in a 3-month suspension of the driver's license and a fine. Driving a commercial vehicle under the influence of alcohol will also result in a 3-month suspension of the driver's license and a fine; 5. Speeding: Driving 50% above the speed limit will result in a fine and revocation of the driver's license.
4
3
Share

What causes the EPS and ABS lights to come on?

This may be caused by the generator not producing electricity. Reasons why a car generator does not produce electricity: 1. The intake air temperature or water temperature is too high, or the cooler is blocked: The intake air or water temperature should be reduced, and blockages in the cooler should be cleared. Before the issue is resolved, the generator load should be limited to reduce the generator temperature. 2. Too much or too little lubricating grease is added to the bearings: Lubricating grease should be added according to regulations, usually 1/2~1/3 of the bearing chamber (the upper limit for low speeds, the lower limit for high speeds), and it is advisable not to exceed 70% of the bearing chamber. 3. Bearing wear causes local overheating of the bearings: Check the bearings for noise. If stator and rotor friction is found, immediately shut down for maintenance or bearing replacement.
11
2
Share

What is the distance for placing warning signs on ordinary roads?

On ordinary roads during the day, the warning triangle should be placed 50 meters behind the vehicle, and at night, it should be placed 150 meters behind the vehicle. Here are the details: 1. Ordinary roads: During the day, place the warning triangle 50 meters behind the vehicle; at night, place it 150 meters behind the vehicle. 2. Highways: On highways during the day, place the warning triangle 150 meters behind the vehicle; at night, place it 250 meters behind the vehicle. 3. Triangle placement: The warning sign is to alert that there is a faulty vehicle in the current lane, so the triangle must be placed in the lane where your vehicle is experiencing trouble—do not place it randomly. If a vehicle breaks down on a curve, the warning triangle should be placed before the curve to alert incoming vehicles to avoid the faulty car.
20
5
Share

How long does it take for a C1 driver's license to expire?

C1 driver's license will be invalid if it has not been renewed for more than three years after the expiration date. More details are as follows: 1. Ninety days before expiration: The motor vehicle driver should apply for renewal at the vehicle management office where the driver's license was issued or elsewhere within ninety days before the expiration of the motor vehicle driver's license. 2. Less than one year after expiration: If the license has expired for less than one year, it can still be renewed, but certain penalties such as demerit points or fines may apply. 3. More than one year after expiration: If the license has expired for more than one year without renewal, the motor vehicle driver's license will be revoked. If the license has been revoked for less than two years, the driver can restore the normal use of the license by passing the subject one exam. If it has been revoked for more than two years, the driver needs to reapply for a new license.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.