How to Remove Cement from Car Surface?

3 Answers
McDakota
07/29/25 1:04pm
Methods to remove cement from the car surface are: 1. Rinse off with clean water before the cement stains harden; 2. Spray white vinegar or a specialized cement cleaner onto the cement stains, wait for them to soften, then rinse off with clean water; 3. Pour gasoline onto the stains, wait for the car paint to soften, and then rinse off the cement stains with water. Methods to maintain car paint include: 1. Wash the car after the engine has cooled down; 2. Minimize exposure to direct sunlight; 3. Clean stains on the car body promptly; 4. Rinse with clean water after rain to prevent acid rain corrosion; 5. Apply wax or glaze coating.
Was this review help?
2
5
Share
KimberlyRose
08/14/25 2:27am
Last time my car was parked near a construction site and accidentally got splashed with cement spots, so I cleaned it myself. First, I used plenty of water to wet the cement surface to prevent further hardening. Then, I applied some white vinegar or cola to the cement and patiently waited for 20-30 minutes to let it soften. After that, I used a damp towel to gently wipe it off bit by bit—never use fingernails or keys to scrape it, as this can scratch the car paint. Once cleaned, I thoroughly washed the area with car shampoo and finally applied a layer of wax to protect the paint. If the affected area is large or the cement has already dried and hardened, it’s best to go directly to a professional auto detailing shop. They have specialized cleaning agents and polishing equipment, making the process safe and hassle-free. Avoid using highly corrosive chemicals, as they can damage the car paint and do more harm than good.
Was this review help?
16
4
Share
Expand All
GageAnn
10/09/25 7:34am
I've seen many cars stained with cement during repairs. Remember three key points: timing, tools, and technique. The easiest solution is to immediately use a high-pressure water gun when cement first splashes on. If it has solidified, use a neutral cement cleaner, spray it evenly on the cement surface, wait ten minutes, then gently scrape it off with a plastic scraper after softening. Keep the scraper angle flat and scrape as gently as if scooping ice cream. After treatment, rinse thoroughly with clean water to remove any residual chemicals, otherwise, it may corrode the paint. Finally, remember to check the paint surface; minor scratches can be repaired with scratch wax. Wear rubber gloves when handling it yourself, and don't skimp on protective measures. If you're unsure about the procedure, it's safest to spend some money and hire a professional.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

Does the all-new Bora have anti-collision beams?

The all-new Bora is equipped with anti-collision beams, which are concealed inside the bumper and within the doors, effectively protecting passengers in the event of significant impact. The working principle of the anti-collision steel beams is that during medium to high-speed driving, in case of a collision, the front anti-collision beam distributes the impact energy to the energy-absorbing boxes. These boxes then immediately deform, dispersing the remaining energy to the longitudinal beams on both sides, allowing the entire body structure to absorb the energy. The dimensions of the all-new Bora are 4562mm in length, 1793mm in width, and 1468mm in height, with a wheelbase of 2614mm. While the size has increased, the interior layout has become more rationalized. Compared to the previous generation, the actual interior seating space of the all-new Bora has significantly improved, with front and rear legroom increased by up to 20mm.
15
5
Share

How to Replace the Battery in an Accord Car Key?

Method to replace the battery in an Accord car key: First, remove the mechanical key, then pry open the shell along the middle gap of the remote key casing. This will reveal the chip and the battery. Remove the old battery and install the new one. The Accord is a mid-size sedan under Honda, equipped with three types of engines: a low-power 1.5L turbocharged engine, a high-power 1.5L turbocharged engine, and a 2.0L naturally aspirated engine. In terms of body dimensions, the Accord measures 4945mm in length, 1845mm in width, and 1480mm in height.
16
4
Share

How to reset the tire pressure warning on the Mercedes-Benz GLC?

Steps to reset the tire pressure warning on the Mercedes-Benz GLC: First, ensure the key is turned to the second position. Use the left directional keys on the steering wheel to navigate to the maintenance interface on the dashboard, then select the tire pressure option to proceed with the settings. The Mercedes-Benz GLC is the first crossover model launched by Mercedes-Benz, with dimensions of 4683mm in length, 1780mm in width, and 1664mm in height, and a wheelbase of 2873mm. When the rear seats of the Mercedes-Benz GLC are fully folded down, the transition is smooth, featuring an expansive body proportion. It offers five driving mode options and provides more spacious seating and storage space compared to the previous generation model.
14
2
Share

Why is water dripping from the exhaust pipe of the Fabia?

Water dripping from the exhaust pipe of the Fabia is because gasoline generates water vapor and carbon dioxide after complete combustion. Water vapor is colorless and transparent at high temperatures, but when the temperature drops below 100 degrees, the water vapor condenses into water. If the condensed water droplets are very small and suspended in the air, the water vapor appears as white gas. When the ambient temperature is low, the condensed water vapor accumulates and turns into water droplets, which are then discharged through the exhaust pipe. The Fabia is a compact family car under the Skoda brand, equipped with either a 1.4L or 1.6L engine from the EA211 series, paired with a 5-speed manual or 6-speed automatic transmission.
18
1
Share

Where is the USB port located in the Volkswagen Touareg?

The USB port in the Volkswagen Touareg is located inside the storage compartment in front of the front passenger seat. USB (Universal Serial Bus) is an external bus standard and a technical specification for input/output interfaces, widely used in information and communication products such as personal computers and mobile devices. The Touareg is a mid-size sport utility vehicle (SUV) introduced by Volkswagen, built on the MLB Evo platform and positioned as the flagship SUV of the Volkswagen brand, offering a total of three models with two different powertrains. In terms of power, the Volkswagen Touareg is equipped with a 3.6L V6 turbocharged gasoline engine and a 3.0L V6 diesel engine, with the former delivering a maximum output of 206 kW and the latter 176 kW.
19
3
Share

What is the displacement limit for China 6?

China 6 limits the displacement to 1.5L. Below is an introduction to China 6: Definition: China 6 vehicles are those that meet the requirements of the "Limits and Measurement Methods for Emissions from Light-duty Vehicles (China 6)". Implementation phases: The China 6 emission standard is implemented in two phases. The first phase, starting from July 1, 2020, requires all sold and registered vehicles to comply with the China 6A standard. The second phase, starting from July 1, 2023, requires all sold and registered vehicles to comply with the China 6B standard. Some cities may implement the China 6 emission standard for light-duty vehicles as early as January 1, 2019.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.