How to Remove Car Seat Cushions?

1 Answers
SanDelilah
07/29/25 8:23pm
First, car seats consist of two components: the seat cushion and the backrest. The first step is to remove the backrest. At the top of the rear seat backrest, where the headrest is located, grip firmly with your hands, push backward forcefully while shaking it slightly. After a few shakes, it should come off.
Was this review help?
17
1
Share
More Forum Discussions

Does Fender Reshaping Count as an Accident Vehicle?

Fender reshaping does not count as an accident vehicle. Concept of Fender: The fender, also known as the wing panel, is divided into front fender and rear fender based on its installation position. It is a type of covering component on motor vehicles and non-motor vehicles. Function of Fender: According to fluid dynamics, it reduces the drag coefficient, making the vehicle run more smoothly. The front fender prevents sand, gravel, and mud splashed up by the wheels during driving from reaching the bottom of the cabin, thereby reducing damage and corrosion to the chassis. Definition of Accident Vehicle: An accident vehicle refers to a vehicle that has suffered damage due to non-natural wear accidents, resulting in a decline in mechanical performance and economic value. First, observe whether the gaps between the vehicle's covering parts are uniform and consistent, and then check if the side body lines are smooth. If the waistline is noticeably uncoordinated, it can be concluded that the vehicle has been involved in a collision, and a relatively severe one at that.
18
1
Share

What time does the license plate auction start?

The license plate auction time is generally from 9:00 to 16:00 during the 7 days before the third Saturday of each month. License plate application process: The applicant submits the auction participation application online in person, which is accepted and verified by the Transportation Administrative Service Center; Wait for verification results (20 working days); Schedule an appointment at a service point to complete auction registration procedures; Receive the "Auction Sealed Code Slip"; After approval, the "Auction Sealed Code Slip" will be automatically activated, allowing participation in the current auction. Precautions for license plate auction: If the quota certificate exceeds its validity period, the holder cannot use it to complete vehicle registration procedures. The holder may entrust a qualified auction institution to auction the passenger car quota within 2 years after the expiration; If the holder still does not entrust the auction within the aforementioned period, they will no longer have the right to entrust the auction, except for legal reasons preventing the exercise of this right. The holder cannot apply to participate in passenger car quota auctions again within 3 years after entrusting the auction. Shanghai new energy vehicle indicators can be directly applied for and obtained for free without participating in auctions.
15
5
Share

Can I Buy a Used Car from Another Region?

It is possible to purchase a used car from another region. Steps for purchasing: Upon arriving at the transfer hall, present the required documents to obtain a "Cross-Region (Local) Used Vehicle Sales Contract." Both parties should fill in their respective details. Once completed, submit all the documents to proceed with the "Transfer Acceptance" process. Next, drive the vehicle to the inspection area, where staff will conduct an inspection, take imprints of the vehicle identification number, remove the license plate, and take photos. A fee of 35 yuan is required for the imprinting service. Collect the vehicle photos and attach them to the inspection record form. Principle of vehicle transfer: Every vehicle has a fixed registration record, which primarily includes the owner's name, address, and relevant vehicle parameters. Transferring a vehicle certifies that it belongs to the new owner and has no involvement in accidents or violations. If the vehicle has issues—such as being involved in an accident, failing annual inspections, being stolen, or being smuggled—it cannot undergo the normal transfer process.
13
0
Share

How to Replace the Transmission Fluid for Buick LaCrosse?

Buick LaCrosse transmission fluid replacement can be divided into two steps: 1. Remove the transmission oil pan, take out the filter, and clean the oil pan thoroughly. 2. Then install a new filter and reassemble the oil pan, followed by adding new transmission fluid. Depending on the transmission structure, transmission fluid is categorized into manual transmission fluid and automatic transmission fluid. Below are the relevant details: 1. Manual transmission fluid, commonly referred to as gear oil. It is primarily composed of petroleum-based lubricating oil or synthetic lubricating oil, blended with extreme pressure anti-wear agents and oiliness agents to form an essential lubricant. Used in various gear transmission devices to prevent gear surface wear, scuffing, sintering, etc., thereby extending service life, improving power transmission efficiency, and reducing power loss. 2. Automatic Transmission Fluid (ATF) is specifically designed for automatic transmissions. The dedicated fluid used serves as the hydraulic fluid for the torque converter, the lubricating oil for the planetary gear structure, and the hydraulic oil for the shifting mechanism. Under normal driving conditions, ATF should be replaced every 120,000 kilometers, while under severe driving conditions, it should be replaced every 60,000 kilometers.
10
4
Share

What is the fuel consumption of the Geely New Vision?

Geely New Vision has good fuel consumption performance, with the MIIT comprehensive fuel consumption being only 6.3L/100km. The 2017 New Vision adopts a newly upgraded 1.3T efficient engine, which is more economical and practical, achieving both high performance and low fuel consumption. Below is an introduction to the Geely New Vision: 1. The overall design of the New Vision adopts Geely's family-style design language, featuring the family-style water ripple grille, paired with a blade-style engine hood and a shark-mouth lower grille. It is equipped with integrated high/low beam headlights, with the eyebrow line and grille designed as a unified element. LED daytime running lights and side mirror light strips enhance safety. 2. The rear of the car uses multiple sharp lines for segmentation, with split tail lights connected horizontally by chrome trim, echoing the integrated spoiler and loop-shaped chrome lower guard. It adopts a new flat torque converter, improving smoothness and reducing vibration and jerkiness. Matched with a 1.5L DVVT all-aluminum engine, both overall performance and fuel economy are enhanced.
7
0
Share

What is the method for checking the oil level in an A6L?

The method for checking the oil level in an A6L is as follows: 1. Press the CAR button on the gearshift panel. 2. Then press the multifunction blank button at the bottom left, and a Chinese menu will pop up on the screen. Use the multifunction rotary knob to rotate to "Maintenance and Inspection," then press the rotary knob to confirm. At this point, a directory of options will appear on the interface. 3. Rotate directly to the "Engine Oil Level" option in the directory and press the rotary knob to proceed to the next step. The interface will then display the message "Engine oil level will be displayed in approximately 2 minutes. The engine should be warmed up and turned off." 4. Start the engine and let it run for 2 minutes to warm up, then turn it off. Press the return key and wait for about 1 minute, then re-confirm the oil level information to view the message "Engine oil level normal."
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.