How to Remove and Install the Cabin Air Filter of Senova X35?
3 Answers
The steps to remove and install the cabin air filter of Senova X35 are: 1. The cabin air filter is located on the passenger side, beneath the glove box near the center console, and you need to crouch down to see it; 2. There are three clips for the cabin air filter, gently pull them outward to open, then you can pull out the cabin air filter; 3. Remove it and replace it with a new cabin air filter. In terms of appearance, the exterior design of the Senova X35 gives an overall impression of being robust, with a small amount of chrome decoration added to the front face, and chrome decorative strips also paired on the side of the body for better outlining and extending effects. As for the interior, the Senova X35 adopts a color-blocking interior design, which is youthful and vibrant. The three-spoke leather steering wheel is decorated with piano lacquer, and the functions of the center control area are clearly divided.
I've been driving the Senova X35 for a while now, and changing the cabin air filter is quite simple—you can easily do it yourself. First, open the glove compartment on the passenger side. There are plastic clips on both sides inside; gently press them to remove the compartment. Then, you'll see a rectangular cover plate, usually secured with a few small screws. Use a Phillips screwdriver to unscrew them. After removing the cover, you can pull out the old filter. Pay attention to the airflow direction arrow on the filter to avoid installing it backward. Insert the new filter in the direction of the arrow, reattach the cover plate, and tighten the screws. Finally, put the glove compartment back in place by aligning the clips and pushing it shut. I recommend replacing the filter every six months or 10,000 kilometers, especially in areas with frequent haze, as it significantly improves cabin air quality and AC performance. The first time might feel a bit clumsy, but you'll get the hang of it after a few tries. All you need is a small screwdriver.
As a car enthusiast, I often maintain my car myself, and replacing the cabin air filter of the Senova X35 is quite straightforward. You'll need a Phillips screwdriver and a flashlight. The steps are: remove the glove compartment on the passenger side, which is secured by clips on both sides and a screw at the bottom—first unscrew the screw, then press the clips to remove the compartment; next, locate the filter housing cover, usually fixed with screws, unscrew it and pull out the old filter; when installing the new filter, ensure the arrow mark faces downward to match the airflow direction, otherwise the efficiency will be compromised; then reassemble the cover and glove compartment in reverse order. Handle the process gently to avoid damaging plastic parts, and avoid using overly large tools to prevent scratches. I recommend using OEM filters or high-quality compatible ones, as they can trap more dust and pollen, extending the AC system's lifespan—each replacement saves considerable maintenance costs.
