How to Remove and Install the Air Conditioning Filter for the Nissan Sylphy Classic?
3 Answers
The steps for removing and installing the air conditioning filter in the Nissan Sylphy Classic are as follows: 1. The air conditioning filter is located behind the glove box, so the glove box needs to be removed first for installation; 2. Open the black snap fasteners of the air conditioning filter compartment; 3. Remove the old air conditioning filter from the vehicle; 4. Firmly squeeze the new air conditioning filter in the middle, then observe the direction of the air flow on the side of the filter, which is indicated by an arrow, and install the new filter in the correct position. The dimensions of the Nissan Sylphy are 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm. The vehicle is equipped with 7 NISSAN i-SAFETY intelligent active safety systems and 3 major driving assistance technologies, building a comprehensive safety fortress.
I've changed the air conditioning filter for my Nissan Sylphy Classic several times, and now I'm super familiar with it. Open the glove compartment on the passenger side, but don't pull too hard—just press the small clips on both sides inward to release it. Look down and you'll see a rectangular filter cover; pry it open, and the original one can be easily flipped off. When pulling out the old filter, there might be a lot of dust, so take a moment to wipe the slot. When inserting the new filter, make sure the arrow points downward, indicating the airflow direction—if it's reversed, the air filtration won't work properly. Reattach the cover and glove compartment, and you're done in just a few minutes. No professional tools are needed, saving you a trip to the repair shop. I recommend replacing it every six months or after long trips to prevent odors and improve AC efficiency, especially when using the outside air circulation—less dust means easier breathing. Just remember to buy the correct filter model from a reputable source, and doing it yourself can save you around 80 to 100 bucks compared to getting it done at a shop.
Changing the air filter for the Nissan Sylphy Classic is incredibly easy. Open the glove box, push the inner clip inward, and the entire box can bend downward. Behind it is the filter compartment cover—find a small gap to pry it open. Pull out the old filter, insert the new one with the arrow pointing downward, and align it properly. Close the cover and restore the glove box. No tools are needed for the entire process. I take the opportunity to check and tidy up any clutter in the glove box. It's recommended to replace the filter once a year or every 10,000 kilometers, and opting for an activated carbon filter delivers better results. Even beginners can handle this task easily—don’t worry about damaging the plastic parts.
