How to Remove Adhesive Residue from a Car?

Where is the tire pressure sensor?

The tire pressure sensor is located inside the tire, and depending on the installation position, it can be divided into built-in and external types. The built-in sensor is installed inside the tire, while the external type adds a sensor outside the valve stem. The working principle of indirect tire pressure monitoring is: when the air pressure of a tire decreases, the weight of the vehicle will cause the rolling radius of that wheel to become smaller, resulting in its rotation speed being faster than other wheels. By comparing the speed difference between the tires, the purpose of monitoring tire pressure is achieved. The tire pressure monitoring sensor can accurately measure the temperature and pressure inside the tire. Tire pressure monitoring systems can be divided into two types: one is the indirect tire pressure monitoring system, which determines whether the tire is abnormal by the speed difference of the tires; the other is the direct tire pressure monitoring system, which installs four tire pressure monitoring sensors inside the tires.

6

3

Share

Why Does Car Glass Always Frost Up?

The reason car glass always frosts up: After people leave the car at night, residual heat remains inside the vehicle, causing the temperature of the car glass to be higher than the outside. If the external temperature is too low or it snows, the snowflakes landing on the glass will melt first. As the snowflakes melt, the interior temperature gradually drops to match the outside temperature, causing the melted snow water on the glass to freeze. Methods to clean frost on car glass: 1. When parking after using the car, don't lock the car and leave immediately. Wait patiently for a while, open both doors for ventilation, and when the interior temperature drops to near the outside temperature, turn on the power and use the wipers to clear any remaining snow water from the windshield before leaving. 2. Frost on the rear window is easier to handle, as most cars are equipped with a rear window grid-style defroster. The defroster consumes battery power when in use, so always start the engine first, then press the rear window defogger switch. The defroster will automatically turn off after 10 minutes.

15

0

Share

Is Lingzhi the same as Lexus?

Lingzhi and Lexus refer to the same car model without any essential difference, only representing the brand's naming in different periods. Lexus is the officially registered Chinese name when the brand entered the Chinese market with official backing. Lexus is a luxury car brand under Toyota. Taking the Lexus ES as an example, its body dimensions are 4975mm in length, 1866mm in width, and 1447mm in height, with a wheelbase of 2870mm. The vehicle is equipped with an advanced 2.5-liter DOHC engine and a 3.5-liter DOHC engine, featuring a series of intelligent and forward-looking active safety configurations including the Pre-Collision System (PCS) and Blind Spot Monitor (BSM).

8

0

Share

How to Turn on the Interior Ambient Lighting in Volkswagen CC?

To turn on the interior ambient lighting in Volkswagen CC: When the light switch is turned on, the interior ambient lighting will automatically activate. Additionally, the brightness of the interior ambient lighting can be adjusted using the control located to the right of the light switch. The actual ambient lights are installed above the footwells for the driver and front passenger, while the rear ambient lights are fixed beneath the front seats. The Volkswagen CC measures 4865mm in length, 1870mm in width, and 1459mm in height, with a wheelbase of 2841mm. It is a 5-door, 5-seat hatchback equipped with a 7-speed dual-clutch transmission, delivering a maximum power of 137kW and a maximum torque of 320Nm.

13

3

Share

How to raise the rear wing after starting the Audi A7?

Audi A7 rear wing lifting method: Generally, when the vehicle speed reaches 130km/h, the rear wing will automatically rise, and when the speed drops to 80km/h, the rear wing will automatically lower. The function of the car rear wing is to create downward pressure from air resistance during high-speed driving, effectively counteracting lift and controlling airflow downforce, thereby reducing the drag coefficient accordingly and enhancing high-speed driving stability. Since the rear wing can reduce the car's air resistance, installing a rear wing on high-speed vehicles also helps save fuel to some extent, while also improving the car's appearance and serving a decorative purpose. In terms of body dimensions, the Audi A7 measures 4976mm in length, 1908mm in width, and 1405mm in height.

6

1

Share

What is the emission standard of the Fiat 500?

The emission standard of the Fiat 500 is Euro IV. Vehicle emission standards refer to regulations on the content of harmful gases emitted from vehicle exhaust, such as CO (carbon monoxide), HCNOx (hydrocarbons and nitrogen oxides), and PM (particulate matter, soot). The Fiat 500 features a cute yet sturdy bubble-shaped body. In terms of dimensions, it measures 3547mm in length, 1627mm in width, and 1520mm in height, with a wheelbase of 2300mm. The car is a 3-door, 4-seat hatchback, equipped with a 6-speed automatic transmission and a front suspension type of MacPherson independent suspension.

10

1

Share

How to Remove Adhesive Residue from a Car?

Where is the tire pressure sensor?

Why Does Car Glass Always Frost Up?

Is Lingzhi the same as Lexus?

How to Turn on the Interior Ambient Lighting in Volkswagen CC?

How to raise the rear wing after starting the Audi A7?

What is the emission standard of the Fiat 500?

What to Do When the Honda Accord Steering Wheel Locks Up?

What is the maximum wading depth of the Lavida?

When Should a Car Be Refueled?

What is the installation direction of the air conditioning filter?