How to Remove Adhesive Residue After Peeling Off Car Window Film?

What does it mean when the car coolant light comes on?

The car coolant light comes on due to reasons such as insufficient coolant, excessively high engine temperature, malfunctioning or failed cooling fan, or damaged thermostat. Here are some relevant additional details: Note: When the coolant temperature warning light comes on, you should stop the car to check, and it is important to stop. Park the vehicle in a safe area but do not turn off the engine; let the engine continue running at idle speed and open the hood to allow heat to dissipate. If you see steam coming from the hood, observe first and do not open it hastily to avoid burns. Check the coolant reservoir: After parking, first check if the coolant level in the auxiliary reservoir is too low. Open the engine hood and see if the coolant level is normal. If the coolant level is below the minimum line, it indicates the coolant is insufficient. If possible, add coolant. If coolant is not available, you can temporarily use mineral water as a substitute, but remember to replace it with new coolant afterward.

1

5

Share

Can a car be exposed to rain 12 hours after touch-up painting?

Can a car be exposed to rain 12 hours after touch-up painting? A car can be exposed to rain immediately after touch-up painting is completed. This is because after automotive painting, the paint is baked at moderate high temperatures to dry. Here are some precautions regarding automotive touch-up painting: 1. Primer: The substrate must be completely dry before applying clear coat, otherwise loss of gloss may occur. 2. Base coat: Single-component base coat must be used for quick repairs. 3. Clear coat: The spraying pressure should not be too high (2-2.5KPa), with 1-2 minutes standing time between coats depending on ambient temperature - lower temperatures require longer standing times while higher temperatures require shorter intervals. The spraying thickness should be 1.5-2 coats and not too thick, otherwise drying will be difficult. After clear coat application, it must stand for 5 minutes before baking.

10

1

Share

What to Do When the Car Battery Is Dead and the Engine Won't Start?

The solutions for a car battery being dead and the engine not starting are: 1. Check the spark plugs, as they are crucial to the car's ignition system. The performance of the spark plugs directly affects the overall working performance and efficiency of the vehicle; 2. Battery depletion: The characteristic symptom is that the starter begins to turn but lacks sufficient power, eventually making only a clicking sound without turning; 3. Fuel flow obstruction: The characteristic symptom is no oil pressure in the engine's fuel supply line. This situation often occurs on extremely cold mornings due to long-term dirt accumulation in the fuel line. At very low temperatures, water and debris mix, blocking the fuel line and preventing the engine from starting. The solution is to place the car in a warm environment for a while, allowing it to start, or to thoroughly clean the fuel line to resolve the issue permanently.

12

5

Share

Is Clutch Pedal Vibration Normal?

Clutch pedal vibration is not a normal phenomenon. Common causes include severe carbon buildup and severe carbon buildup. The specific reasons and countermeasures are as follows: Severe carbon buildup: Excessive carbon deposits can lead to clogged spark plugs and valves if the engine cylinders have severe carbon buildup, directly causing the car to shake during idling. If the car's acceleration performance has significantly deteriorated and the shaking persists for a long time, it is necessary to clean the engine cylinders. Fuel additives can be used to remove carbon deposits by adding a carbon-cleaning additive to the fuel tank. During engine operation, the fuel additive flows with the fuel through the fuel line into the intake manifold (except for direct injection engines), intake valves, fuel injectors, and combustion chamber. Through contact with these components, it dissolves and cleans carbon deposits, sludge, and other contaminants from their surfaces. Unstable concentration: Fuel system malfunctions causing unstable fuel pressure can easily lead to unstable mixture concentrations, not only causing shaking but also resulting in unstable idling. In this case, it is necessary to replace the fuel filter, as the filter element can become clogged after prolonged use.

20

4

Share

Should you enter the car first or walk around it in Subject 3?

In Subject 3, you should walk around the car first before entering. Here are specific details about the driving test: 1. Subjects: The test is conducted in the order of Subject 1, Subject 2, Subject 3, and Subject 4. In the Subject 3 test items, the new regulations circulating online also place more emphasis on the driver's safety and civilized awareness. 2. Retake: For driving test Subjects 2 and 3, you can only take each test five times. If you fail, you will need to repay the driving school fee. According to the Ministry of Public Security's Order No. 123 and No. 125, if you fail the fifth scheduled test for Subject 2 and Subject 3 road driving skills, all previously passed subjects will be invalidated. If you want to obtain a driver's license, you will have to re-register and pay the driving school tuition.

2

4

Share

Does the vehicle need to undergo an on-site inspection in the sixth year?

For the sixth-year inspection of a vehicle, an on-site inspection is required. Below are the relevant details: Vehicle Exemption from Inspection: If the vehicle meets the exemption conditions and the inspection period on the driving license is 2016, the owner can enjoy two exemptions from on-site inspections between 2016 and 2021, only needing to apply for the annual inspection sticker every two years. By the sixth year, the vehicle is no longer eligible for exemption and must undergo an on-site inspection while also applying for the annual inspection sticker. Vehicle Annual Inspection: For a vehicle that is exactly six years old, the inspection process is the same as a regular annual inspection. The owner must drive the vehicle to the inspection station, bringing along their ID card, driving license, vehicle and vessel tax or tax exemption certificate, and compulsory traffic insurance policy. After passing the inspection, a certification form will be issued. Finally, this form along with the other documents must be submitted at the relevant counter to obtain the annual inspection sticker.

17

5

Share

How to Remove Adhesive Residue After Peeling Off Car Window Film?

What does it mean when the car coolant light comes on?

Can a car be exposed to rain 12 hours after touch-up painting?

What to Do When the Car Battery Is Dead and the Engine Won't Start?

Is Clutch Pedal Vibration Normal?

Should you enter the car first or walk around it in Subject 3?

Does the vehicle need to undergo an on-site inspection in the sixth year?

What does it mean to schedule three exam sessions for Subject 1?

What is the correct sequence for gear shifting and acceleration in Subject 3?

How many hours of check-in are required for Jiangxi Subject 2 before scheduling an appointment?

Can the Subject 2 Driving Test Be Taken Twice at Once?