How to Remove Adhesive from Car Window Film?

What's the matter when there is no reaction on the screen when shifting to reverse gear and no rearview image?

You should check whether the reversing light is on. If the reversing light is not on, you should check the reversing light switch. If the reversing light is on but there is no rearview image, you should check the wiring of the rearview image. The following is a related introduction about the rearview image: Advantages: Simple installation. Generally, a single-output rearview image only requires connecting the positive power wire to the positive terminal of the car's reversing light power, and the negative power wire to the negative terminal of the reversing light or to ground (GND). The wiring can be easily understood by studying different car models, and the camera can be installed by drilling holes in an easy-to-install position. It is clear at a glance. After the vehicle is shifted to reverse gear, the actual scene at the rear of the car can be clearly seen, making it convenient for the driver to judge. Function: Even at night, it can be seen clearly through infrared rays. The professional car probe has further improved anti-magnetic, anti-shock, waterproof, and dustproof performance. The car display uses TFT true color and has been treated with anti-magnetic processing to avoid signal interference and flickering.

12

1

Share

Will points be deducted and fines imposed for not using turn signals when turning?

For motor vehicles failing to use turn signals when turning, a fine will be imposed and 1 point will be deducted. Below is relevant information about turn signals: Overview: Turn signals are important indicator lights activated when a motor vehicle turns to alert surrounding vehicles and pedestrians. The turn signal bulb uses a xenon tube, controlled by a single-chip microcomputer circuit, with alternating left-right flashing for continuous operation. Turn signals employ flashers to achieve light blinking, mainly categorized into resistance wire type, capacitor type, and electronic type. Structural Principle: The resistance wire type can be further divided into thermal wire type (electrothermal) and vane type (spring-action), while the electronic type includes hybrid (relay with contacts and electronic components) and fully electronic (no relay). For example, the spring-action flasher operates on the principle of current thermal effect, using thermal expansion and contraction as the driving force to cause sudden movement of the spring plate, thereby connecting and disconnecting contacts to achieve light blinking.

5

2

Share

Can China 3 Motorcycles Be Licensed?

China 3 motorcycles cannot be licensed now, as only motorcycles that meet the China 4 emission standards are currently allowed for licensing. Reasons for the prohibition: Only China 4 motorcycles that comply with the standards can be licensed. This is because China 3 motorcycles are too prone to polluting the environmental air, hence they have been prohibited from being licensed since July 2019. Daily maintenance: Regular cleaning of the motorcycle is essential. When riding, extra attention should be paid to cleanliness since many parts of the motorcycle are exposed to the outside. It is recommended to wash it at least once a week to maintain its aesthetic appearance and improve its operational efficiency. Maintain proper riding habits. Some riding techniques used by young riders should not be emulated as they can damage the motorcycle, especially the throttle and valve components. Always be cautious during regular riding.

14

2

Share

Will Vehicle Insurance Cover Damage from Heavy Rain in Guangzhou?

Insurance can cover vehicle damage caused by heavy rain and flooding. Only Compulsory Traffic Insurance (CTI) does not cover: If only Compulsory Traffic Insurance is purchased, the insurance company will not provide compensation. If no commercial insurance is purchased besides CTI, the losses must be borne by the vehicle owner. Purchasing CTI and Commercial Insurance: Engine damage is not covered. If commercial insurance, including vehicle damage insurance, is purchased in addition to CTI, the owner can file a claim with the insurance company by calling the designated loss assessment hotline after the vehicle is submerged. The insurance company will then proceed with compensation according to the procedure. However, vehicle damage insurance does not cover engine water ingress. Damage to other parts of the car, such as the interior or electronic control units, will be assessed and compensated based on specific circumstances.

16

3

Share

Should the clutch be released quickly or slowly after shifting gears?

The speed of releasing the clutch is related to the driving conditions. Generally, when the vehicle is at low speed (such as starting or shifting from first to second gear), the clutch should be released slowly. When the vehicle reaches a certain speed (such as shifting from second to third gear, third to fourth gear, etc.), the clutch can be released quickly. During the process of starting the vehicle (0-1st gear), a larger torque is required, especially when starting on a slope. To prevent the engine from stalling due to insufficient torque, the driver usually releases the clutch slowly. There is a difference between the engine speed and the transmission input speed to ensure sufficient torque while maintaining the minimum engine speed for continuous operation. When shifting from 1st to 2nd gear, the vehicle already has some speed, and its inertia can prevent the engine from stalling. However, to ensure smooth driving, it is recommended to release the clutch slowly. When shifting from 2nd to 3rd gear, the vehicle has reached a certain speed, and quickly releasing the clutch has minimal impact on driving smoothness, so the clutch can be released faster. After the vehicle reaches normal driving speeds, the clutch can be released quickly, as this has little effect on driving smoothness. The purpose of shifting gears: The engine's output characteristics are fixed. If the engine's speed is directly transmitted to the wheels without change, the wheel speed and torque would also remain constant, making it difficult to adapt to different conditions. For example, when climbing a slope, high speed is not needed, but high torque is required, so a higher gear ratio is used. During high-speed driving, torque requirements are lower, and a lower gear ratio is used. The switching of gear ratios is the function of shifting gears. Converting fixed torque output into varying torque suitable for different road conditions makes the vehicle more flexible and adaptable.

18

5

Share

What is the V level for China 6 vehicles?

China 6 vehicles are VI. Below is a related introduction on how to check vehicle emission standards: Methods to check vehicle emission standards: The vehicle model number is usually marked on the vehicle's nameplate. Visit the Motor Vehicle Environmental Protection website, enter the fuzzy condition (vehicle model number) in the input box on the webpage, input the correct verification code, and click 'Query' to find relevant information about the vehicle, including the emission standard. How to locate the vehicle nameplate: There is usually a nameplate under the co-driver's door. Other possible locations include the lower left corner of the front windshield, the driver's door pillar, the left side of the dashboard, the engine compartment, the adhesive label on the side door, the door frame base, or inside the glove box, where relevant labels displaying the vehicle model number can be found.

3

1

Share

How to Remove Adhesive from Car Window Film?

What's the matter when there is no reaction on the screen when shifting to reverse gear and no rearview image?

Will points be deducted and fines imposed for not using turn signals when turning?

Can China 3 Motorcycles Be Licensed?

Will Vehicle Insurance Cover Damage from Heavy Rain in Guangzhou?

Should the clutch be released quickly or slowly after shifting gears?

What is the V level for China 6 vehicles?

Why does the car still roll when in N gear?

Does stepping on the accelerator in P gear have any impact?

Can You Release the Clutch Immediately After Shifting to Second Gear?

What Causes Lack of Power When Accelerating After Engaging Gear?