How to Remove Adhesive After Peeling Off Car Film?

[HopeFitz]

Evenly apply vinegar with a cotton swab on the remaining film adhesive, then wait for the vinegar to blend with the adhesive before slowly removing it with a cloth or scraper. Apply mentholatum oil multiple times on the adhesive, then slowly scrape it off with a knife. Spray a dedicated car heat-insulating cleaner on the adhesive to be removed, and the adhesive will melt immediately. Finally, wipe it off with a cloth. Apply alcohol on the adhesive to soften it, then slowly scrape the adhesive off with a knife.

[HannahFitz]

Last time I removed the car film, the adhesive was annoyingly sticky, but I managed to handle it myself. I used a professional adhesive remover, which isn't expensive to buy a bottle on Taobao. Spray it on the adhesive, wait five minutes for it to soften, then gently scrape it off with a plastic scraper without damaging the car paint. If you don't have the tools, a hairdryer to heat it up works just as well, but avoid high temperatures to prevent damaging the paint. Finally, clean any residue with dish soap water and apply wax for protection. The whole process took a little over an hour, but it saved me the hassle of going to a repair shop. A reminder to everyone: before removing the film, test a corner first to see if the adhesive comes off easily.

[Omar]

In car repair work, dealing with adhesive residue is a common issue. I recommend the hot air treatment method. First, use a heat gun or a household hair dryer to warm up the adhesive area, setting the temperature to medium to soften the glue. After three minutes, it can be easily scraped off. For stubborn adhesive spots, applying a bit of alcohol or essential balm and wiping several times works well. A plastic scraper is a must-have tool—avoid using metal to prevent scratching the paint. After finishing, don't forget to spray some car wax for maintenance to restore the surface's shine. This method is simple and effective, preventing contamination or aging caused by adhesive residue.

[IsabelleAnn]

As a homemaker, I used a simple household method after removing the car film. Take a cloth, dip it in a mixture of dish soap and warm water, and repeatedly wipe the adhesive residue area. A few gentle wipes will clean it right up. If you find it troublesome, just buy an eraser and rub vigorously—it takes some time but saves money and is eco-friendly. The key is not to rush during the operation to avoid scratching the car's exterior. Once done, rinse off any chemical residues with water, and it will look as good as new.