How to Remove a Wheel?

[MacAlan]

First, connect the power of the jack to the power source in the driver's seat. Then, turn on the switch to lift the car with the jack until the tire is suspended. Attach the appropriate screw rotation head to the rotating screwdriver and rotate it in. Then, press the switch of the rotating screw machine to remove all the tire screws. Once all the screws of the tire are removed, the tire will automatically come off.

[OVivienne]

I often change tires by myself, and safety is the top priority. Park on a flat surface and pull the handbrake tight; for manual cars, put it in reverse gear to prevent rolling. Take out the jack and wrench—make sure the jack is placed on the reinforced points marked under the car, as locations vary by model. Loosen the lug nuts: step on the wrench and turn counterclockwise to loosen all nuts halfway, but don’t remove them yet. Slowly jack the car a few centimeters off the ground, and once stable, fully remove the nuts and take off the wheel. When installing the new tire, tighten the nuts in a crisscross pattern to avoid misalignment, which can cause wobbling while driving. Finally, lower the jack and fully tighten the nuts. The whole process takes about 15 minutes. I recommend keeping a reflective vest and warning triangle in the car for nighttime safety. Regularly check the nuts to prevent loosening on the road. This method is simple and practical, even for beginners, but avoid attempting it on busy roadsides.

[SamanthaFitz]

Experienced in car repairs, changing tires requires the right tools and techniques. After parking the car securely, use stones or wheel chocks to block other wheels to prevent rolling. Use a wrench to loosen the bolts and nuts counterclockwise without removing them completely. Different vehicle models may require different tools, such as a socket set being more effective for SUVs. Place the jack at the marked points on the chassis to avoid damaging the car. After lifting the car, remove the wheel and take the opportunity to clean the wheel well dust or check the brake discs for cracks. When reinstalling the wheel, tighten the bolts diagonally and evenly to balance; otherwise, the car may pull to one side. Inspect the tread wear on the removed tire—if it's worn out quickly, it's time for a replacement. Choose high-quality tools; an extension bar can save effort, and a hydraulic jack is more efficient. Don’t rush the process—beginners often make the mistake of lifting the car before loosening the bolts, making them tighter. After the change, drive slowly for a while to listen for any unusual noises to ensure safety. Regular maintenance can save you from costly major repairs.

[SkylarFitz]

I was nervous the first time I changed a tire, but now I'm not afraid anymore. Park on a flat surface, pull the handbrake, and turn off the engine to ensure safety. Check the manual to find the jacking point to avoid damaging the car. Use a wrench to loosen the bolts counterclockwise, but don't remove them completely. Slowly jack up the car a little, and once it's stable, remove the bolts and take off the wheel. When installing the new wheel, tighten the bolts diagonally to avoid misalignment. Lower the car and fully tighten the bolts. I practiced a few times on quiet side roads before getting the hang of it, and I recommend newbies do the same to avoid panic on the road. If you're not strong enough, ask a friend for help—don't force it. Keep reflective tools and a phone in the car for emergencies. Changing a tire is simple and takes about ten minutes—don't overthink it.

[OBarrett]

When learning to drive, the instructor taught an easy-to-remember wheel-changing procedure: park, pull the handbrake, loosen the screws, jack up the car, remove the wheel, install the new wheel, tighten diagonally, lower the car, and then tighten again. The key is safety—change tires quickly in case of a blowout. Basic tools like a regular jack and a cross wrench are sufficient, and don’t forget warning devices. To prevent rust on screws, clean the wheel hubs regularly—I check them monthly. Practice the process a few times, and you’ll get the hang of it. Beginners should start slow and not worry. Misaligned screws may cause wheel imbalance and affect speed. Practice in an open area to save money and gain knowledge; if unsure, calling for roadside assistance is more reliable. Check tire pressure during the change to extend tire life.