How to Remove a Tesla Tire?

1 Answers
Kendra
07/30/25 7:17am
At the very end of the trunk, there will be a screw for removing the spare tire. Find a small black cover, and you can see the nut after opening the cover. Locate the nut that secures the spare tire (the spare tire is fixed to the car chassis with a screw rod), and place the socket head over the screw in the black hole. Then, insert the torque bar through the hole in the middle of the socket. Rotate the torque bar counterclockwise, and the spare tire will slowly descend under the traction of the steel cable or chain. Once the spare tire falls, pry off the protective panel beneath it to remove the spare tire.
Was this review help?
6
3
Share
More Forum Discussions

Can National 5 be upgraded to National 6?

National 5 cannot be upgraded to National 6 because National 5 requires that the carbon monoxide emissions of gasoline vehicles should not exceed 1 gram per kilometer, while National 6 requires that the carbon monoxide emissions of gasoline vehicles should not exceed 0.5 grams per kilometer. National 5 refers to the fifth stage of national motor vehicle pollutant emission standards, with a control level equivalent to the fifth stage emission standard currently implemented in Europe. National 6 refers to the sixth stage of national motor vehicle pollutant emission standards, including emission limits and measurement methods for light-duty vehicle pollutants and heavy-duty diesel vehicle pollutants. Automobile emission standards refer to the limit regulations on harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and soot emitted from automobile exhaust.
5
1
Share

How to Lift Up the Windshield Wiper?

The method to lift up the windshield wiper is: 1. Turn off the engine or power; 2. Push the wiper switch towards the steering wheel; 3. Once the wiper blade automatically moves to the middle position, you can manually lift it up. The method to replace the wiper is: 1. Lift the wiper arm from the windshield and keep it perpendicular to the windshield; 2. Press the tab and remove the old wiper blade; 3. Insert the new wiper and rotate it until the hook snaps into place. The functions of the wiper include: 1. Helping the vehicle maintain a safe distance from the centerline of the left lane; 2. Assisting the driver in determining the position of the left wheels; 3. Helping to judge the position of the right wheels; 4. Aiding in estimating the distance between the right side of the vehicle and the roadside; 5. Assisting in parallel parking; 6. Removing raindrops and dust attached to the vehicle's windshield.
17
0
Share

How to Operate a Car on the Road?

The steps to operate a car on the road are: 1. Fully depress the clutch pedal; 2. Push the gear lever to engage first gear; 3. Gently press the turn signal lever downward to activate the left turn signal, alerting vehicles in front and behind; 4. Press the horn button; 5. Release the vehicle's manual handbrake; 6. Lift the left foot slowly until the clutch reaches the half-engaged position; 7. The vehicle begins to move; release the clutch and gently press the accelerator. The correct method to park is: 1. Upon reaching the parking spot, press the brake until the vehicle comes to a complete stop; 2. Shift the gear lever into neutral (N), keeping the brake pressed; 3. Engage the handbrake and release the foot brake; 4. After the vehicle is fully stopped, press the brake again, shift into park (P), then exit the vehicle and lock it.
15
0
Share

What to Do When the Outside of the Windshield Fogs Up Before Turning on the AC?

The solutions for the outside of the windshield fogging up before turning on the AC are: 1. Open both windows slightly to allow air circulation; 2. Use the windshield heating wires to defog; 3. Purchase defogging products; 4. Visit a car detailing shop for cleaning. The reason the outside of the windshield fogs up before turning on the AC is the significant temperature difference between the inside and outside of the vehicle. The cabin temperature is higher than the outside, causing moisture in the cabin to condense on the inside of the windshield, forming fog. The maintenance methods for the windshield include: 1. Use specialized or suitable wiper blades and replace them promptly to avoid scratching the windshield; 2. Remove debris from the windshield; 3. Use automotive-specific glass cleaner.
15
1
Share

What to Do When the Vehicle Pulls to One Side?

The solutions for a vehicle pulling to one side are: 1. Replace the suspension springs—if the vehicle leans to the left, slightly adjust the steering to the right; if it leans to the right, slightly adjust the steering to the left. 2. Rotate or replace the tires. 3. If the vehicle leans to the left, slightly adjust the steering to the right; if it leans to the right, slightly adjust the steering to the left. The causes of a vehicle pulling to one side include: 1. Excessive wear on one side of the tires. 2. Damage to the ball joints or shock absorbers. 3. Uneven tire pressure on both sides of the vehicle. 4. Deformation or poor performance of components in the vehicle's suspension system. The consequences of a vehicle pulling to one side can range from minor issues like uneven tire wear or tire failure to severe hazards such as tire blowouts or loss of vehicle control.
4
0
Share

What to Do When the Car Lacks Power and Has High Fuel Consumption?

Check the valves, idle speed motor, intake tract, combustion chamber interior, and spark plugs among other components. If there is any blockage, please clean them thoroughly. For issues caused by traffic congestion, you can temporarily turn off the engine and wait. Change the car fuel and avoid using low-quality fuel, as it can easily cause permanent damage to the car.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.