How to Remove a Car Wheel?

[Gwen]

Wheel removal steps are: 1. Use a wrench to loosen the wheel nuts. 2. Use a jack to lift the vehicle and ensure it is stable. 3. Remove the wheel nuts, adopting a diagonal sequence when removing the hub bolts. 4. Take the wheel off and check if the hub is damaged. Wheel removal precautions and replacement steps: 1. If on the road, first park the car on a level and safe spot, turn on the hazard lights, and engage the handbrake. After confirming safety, place a triangular warning sign at an appropriate distance behind the car. 2. Retrieve the spare tire, tire wrench, and jack. 3. First, loosen the wheel bolts in a polygonal pattern. 4. Place the jack on the chassis support and slowly raise the car until the tire is slightly touching the ground, then remove the bolts one by one in a diagonal pattern. 5. Turn the jack again to raise the car until the tire just leaves the ground, ensuring there is enough space to fit the properly inflated spare tire. Then remove the tire to be replaced and install the spare tire. 6. After installing the tire, ensure the bolts are correctly positioned and tighten them in a diagonal pattern, but not to the tightest state. After lowering the wheel slowly with the jack, tighten the bolts completely.