How to Remove a Car Steering Wheel?

1 Answers
McWalker
07/25/25 7:57am
Methods to remove a car steering wheel: 1. Disconnect the battery; 2. Turn the steering wheel approximately 90 degrees; 3. Insert a flat-head screwdriver into the hole behind the steering wheel; 4. Insert the screwdriver head between the retaining clip and the airbag hook, causing the airbag side to automatically pop slightly toward the seat direction; 5. Turn the steering wheel 180 degrees and continue to pry open the retaining clip; 6. Remove the airbag, disconnect the yellow safety clip behind the airbag, and take out the airbag; 7. Unplug the airbag coupling coil connector located above the interior of the steering wheel, then use an M12 spline to loosen the central fixing bolt of the steering wheel counterclockwise; 8. Remove the steering wheel.
Was this review help?
3
4
Share
More Forum Discussions

What does driving range mean?

Driving range refers to both the comprehensive driving range and the actual driving range of a vehicle. Below are detailed explanations about driving range: 1. Comprehensive driving range: In China, when the Ministry of Industry and Information Technology tests the comprehensive driving range of pure electric vehicles, it adopts the NEDC (New European Driving Cycle) testing standard. This standard is mainly used in Europe, China, and Australia. The NEDC cycle includes 4 urban cycles and 1 suburban cycle, with lower speeds in urban cycles and higher speeds in suburban cycles. 2. Among the maximum driving range and comprehensive driving range, the comprehensive driving range is more valuable for reference. However, during actual driving, road conditions are more complex, and factors such as temperature and personal driving habits can cause the actual driving range of electric vehicles to be even lower. This is why an official comprehensive range of 320km might only achieve an actual range of 300km in real-world conditions.
13
1
Share

Why does the tire pressure warning light come on and then go off?

The reason why the tire pressure warning light comes on and then goes off after driving for a while is due to tire pressure deviation. In this case, if the warning does not reappear after normal driving, there is no problem. If the warning persists, reset the system or visit a 4S shop for professional assistance to check and eliminate the issue. The following are the reasons for abnormal tire pressure: Abnormal tire pressure: Generally, a pressure below 1.8 bar or above 3.0 bar will trigger the warning. At this point, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure monitoring system is not reset in time, it will continue to record the previous data, causing the tire pressure monitoring indicator light to illuminate. Simply reset the tire pressure monitoring system to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which is directly installed inside the tire and connected to the tire inflation valve, is used to monitor tire pressure. If the sensor is damaged during driving, it will also cause the tire pressure warning light to illuminate. For sensor damage issues, the only solution is to replace it with a new component.
3
4
Share

How to Use the Delayed Headlight Shut-off Feature on MG6?

To deactivate the delayed headlight shut-off feature on the MG6, simply flick the light stalk twice in the same manner as turning it on. Below are the detailed steps to disable the MG6's delayed headlight shut-off: 1. To set up the delayed headlight shut-off function, first turn off the headlights, then remove the key after turning off the engine. Immediately flick the light stalk twice as if turning it on to activate the delayed shut-off feature. To set the duration before the headlights automatically turn off, you can find this option in the dashboard settings and adjust the time according to your personal preference and needs. 2. The delayed headlight shut-off, also known as the 'Follow Me Home' feature, essentially keeps the headlights on for a period after the vehicle is turned off, providing external lighting for the owner after exiting the car. This design originally stemmed from many people in Europe and America living in detached houses with private garages, where the vehicle could still offer brief lighting service after parking and closing the garage door. However, some car owners in China do not prefer this feature, in which case they can choose to disable the delayed headlight shut-off.
5
0
Share

How Many Months Should You Not Exceed When Buying Tires?

Do not buy tires that are more than 6 months old. Below is relevant information about car tires: 1. Main material of tires: The main material of tires is rubber. A characteristic of rubber is that it ages over time or after prolonged storage, leading to significant changes in the tire's physical properties such as hardness and wear resistance. If aged tires continue to be used, it may lightly affect vehicle performance or, in severe cases, lead to tire blowouts. 2. Tire lifespan: Generally, all-season or economy tires have a lifespan of 3-5 years, with a mileage of about 50,000 kilometers. Under normal circumstances, tires have a sufficient lifespan of 1 year from the date of manufacture. However, for high-performance tires, the lifespan is only 20,000-30,000 kilometers. If the price is reduced, purchasing them may also be considered.
13
2
Share

What Are the Common Malfunctions of ETC Cards?

ETC card device failure may result in no response, displaying that the card is not properly inserted, or ETC card deduction failure. Below are solutions for ETC malfunction indicators: 1. Reduce speed and maintain distance when passing through ETC lanes: When vehicles pass through ETC lanes, their speed must not exceed the limit indicated by on-site speed signs, and a safe distance should be maintained from the vehicle ahead. 2. Manual lanes can be used if ETC lanes malfunction: If encountering a malfunction or congestion in an ETC lane, drivers can choose to pass through a manual lane without losing any discount benefits. 3. Pass only when the onboard electronic tag displays normal status: Before entering an ETC lane with a vehicle equipped with an onboard electronic tag (OBU), drivers should insert the ETC co-branded card into the electronic tag. The vehicle can proceed through the ETC lane only after the electronic tag shows normal operation. 4. Some vehicles may require cutting the metal explosion-proof film on the windshield: Due to the metal explosion-proof film on the windshields of certain vehicle models, microwave signals may be blocked, preventing OBU installation and activation or successful passage through ETC lanes after installation. It is recommended to seek a professional auto beauty shop to cut the corresponding area on the explosion-proof film.
13
0
Share

What Are the Advantages of LED Taillights?

LED taillights possess a series of technical advantages. Below is a detailed introduction about LED taillights: 1. Automobile taillights, including the lamps and bulbs in the rear of the vehicle. Among them, the function of the lamps is to aggregate and then emit the light from the bulbs, thereby enhancing the brightness and range of the light emitted by the bulbs, as well as changing the color of the bulb's light through the color of the lamps. Currently, there are mainly three types of bulbs: halogen automotive bulbs, HID automotive bulbs, and the emerging LED automotive bulbs. 2. LED taillights are an innovative type of brake lights and taillights that use long-lasting LED light sources. The bulbs are made of diodes, which are brighter than ordinary bulbs and have a faster response speed. LED (Light-Emitting Diode, meaning light-emitting diode in Chinese) is a semiconductor that can convert electrical energy into visible light. It changes the principle of incandescent tungsten filament lighting and energy-saving lamp three-primary-color powder lighting, instead using electric field lighting. They can signal other vehicles and pedestrians when the car brakes, turns around, or changes direction. LED taillights have excellent light source intensity, maintaining extremely high visibility even in foggy conditions.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.