How to remotely start a Mercedes-Benz car?

1 Answers
Matthew
07/30/25 2:48am
Mercedes-Benz remote engine start/stop is a paid feature in "Mercedes-me". After payment, you can directly use your smartphone to remotely start the engine. This feature is only available on certain models. Remote start refers to using the remote key to start the engine or motor from a distance, offering high reliability, convenience, automatic timing, and whole-vehicle heating. Below is an introduction to the usage considerations for Mercedes-Benz's remote start function: 1. Remote engine start can only succeed when all vehicle doors, windows, sunroof, and trunk are closed and locked; otherwise, the reason for the remote start failure will be indicated. 2. The engine starts approximately 30 seconds after clicking the start button, though the exact time may vary depending on network conditions. 3. After remote engine start, the multimedia system and central control screen will also activate but will shut down after a few minutes. 4. If no operation is performed after starting, the engine will automatically shut down after 10 minutes. 5. After remote engine start, if the App or remote key is used to lock or unlock the doors, including keyless entry sensing unlock or lock, the engine will immediately shut down. 6. After the engine starts, the in-car temperature will be displayed in the App. 7. The owner will receive an SMS notification for any action related to remote engine start or stop.
Was this review help?
5
1
Share
More Forum Discussions

Which Part is the Fender?

Automobile fenders, also known as wing panels, are located on the outer body of the wheels and can be described as a covering component. Below is relevant information about fenders: 1. Fenders not only reduce the aerodynamic drag coefficient during driving based on aerodynamics, greatly enhancing the vehicle's stability, but also prevent gravel and mud kicked up by the wheels from splashing onto the underside of the cabin, thereby protecting the car's chassis. 2. If a fender develops cracks, it is likely due to being too thin, making it unable to withstand the torsional deformation of the front beam head. In such cases, a "mesh weaving" method using steel bars can be employed to reinforce the fender through preparatory welding. This ensures the original deformation capacity while also improving the overall toughness of the fender. However, steel plates should never be used for preparatory welding, as this can easily affect the fender's torsional deformation capacity.
3
3
Share

What are the reflective marking requirements for the rear of hazardous material vehicles?

The reflective marking requirements for the rear of hazardous material vehicles are: reflective body markings, hazardous material symbols and text, and an orange stripe must be affixed. Pre-departure vehicle inspection: Before setting off each day, conduct a comprehensive inspection of the vehicle, including checking for oil or water leaks, measuring tire pressure to ensure it is appropriate, inspecting the engine oil condition to verify its color is normal and the oil level is correct. Safe driving: Use seat belts properly. In the event of a severe collision, seat belts provide protection no less effective than airbags. Avoid fatigued driving and take breaks every 2 hours. Comply with traffic rules: Especially on highways, do not speed. Speeding not only risks traffic police penalties but, more importantly, compromises safety.
5
3
Share

Is It Illegal to Load Items in the Trunk?

Loading items in the trunk of a private car does not violate traffic laws. Passenger vehicles are not allowed to carry cargo except on external roof racks and built-in luggage compartments. For sedan roof rack loading: The height must not exceed 0.5 meters from the roof or 4 meters from the ground. For heavy-duty, medium-duty trucks, and semi-trailers: The height must not exceed 4 meters from the ground, and for container-carrying vehicles, it must not exceed 4.2 meters. For other cargo-carrying motor vehicles: The height must not exceed 2.5 meters from the ground. For motorcycle loading: The height must not exceed 1.5 meters from the ground, and the length must not extend beyond the vehicle body by 0.2 meters. For two-wheeled motorcycles, the width must not exceed 0.15 meters on either side of the handlebars. For three-wheeled motorcycles, the width must not exceed the vehicle body.
14
0
Share

Do You Need to Press the Clutch and Brake When Starting a Manual Transmission Car?

Starting a manual transmission car requires pressing the clutch and brake. First, confirm the position of the handbrake and check if the gear lever is in the neutral position. Press the clutch pedal all the way down with your left foot, then start the engine. Each starting attempt should not exceed 5 seconds, and once the engine stabilizes at idle speed, you can begin driving. Below are the benefits of pressing the brake when starting: 1. Pressing the brake enhances the vehicle's braking capability. Some parking areas have steep slopes, requiring the use of the handbrake plus leaving the car in gear. If the handbrake is not effective enough, pressing the brake during starting can prevent the car from rolling. 2. It also avoids accidents caused by forgetting to press the clutch when starting the car in gear, which could lead to sudden movement. Pressing the brake when starting in gear can instantly suppress the engine and prevent accidents.
19
1
Share

What is the displacement of the Tiguan L330?

The displacement of the Tiguan L330's engine is 2.0T. Below is an introduction to the Tiguan L330: 1. Powertrain: The Tiguan L330's engine delivers a maximum power of 137 kW and a peak torque of 320 Nm. It is paired with a 7-speed wet dual-clutch transmission. 2. Exterior: The Tiguan L330 features a front grille adorned with extensive chrome accents, enhancing the horizontal visual effect. The front headlights are connected to the grille, giving the front end a bold and sophisticated appearance. Additionally, the Panorama Comfort version includes an openable panoramic sunroof, while the Intelligent Luxury version boasts enhanced smart features. 3. Interior: Adopting Volkswagen's latest design language, the dashboard employs a polygonal design and features a new dual LCD screen setup. The instrument cluster is upgraded to a 10.2-inch fully digital display, exuding a strong sense of technology. A 9.2-inch HD touchscreen further enhances the smart interactive experience for drivers. 4. Furthermore, the Tiguan L330 is equipped with a three-zone automatic climate control system and a Panorama panoramic electric sunroof.
12
3
Share

How to Reset the Service Light on a Skoda Octavia?

With the car idling, press and hold the reset button located below the speedometer of the Skoda Octavia for 2-3 seconds to reset the service light. Here are some explanations about the service light: 1. The service light is a reminder function set by the manufacturer to alert the owner for maintenance at certain mileage or time intervals. 2. It notifies the owner of required maintenance through dashboard or screen messages or indicator lights. 3. Resetting the service light means clearing the reminder message after maintenance is completed, essentially resetting the information. 4. When the service light comes on, it is advisable to visit a 4S shop as soon as possible for maintenance. After the service, the 4S shop will use a diagnostic tool to reset the service light for the vehicle. 5. The quickest and most accurate method to reset the service reminder light is by using a diagnostic tool. Since individuals generally do not have such equipment, it is recommended to go directly to a 4S shop for resetting.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.