···
Log in / Register

How to remotely control the windows of a Haval M6?

4 Answers
LaEliza
07/29/25 12:41pm
The Haval M6 does not have a remote window-raising function. The window glass of the Haval M6 can only be controlled using the buttons on the door. To remotely control the windows with a key, you will need to install an aftermarket accessory. Below is additional information about the Haval M6: 1. In terms of body dimensions, the new Haval M6 measures 4649mm in length, 1830mm in width, and 1705mm in height, with a wheelbase of 2680mm. It offers a spacious interior and an 808L trunk, which can be expanded to a generous 2010L with seat adjustments. 2. The Haval M6 is equipped with a multifunctional steering wheel, an intelligent dual-mode anti-pinch electric sunroof, dual-zone automatic climate control, keyless entry + one-button start, and adjustable rear seat angles. For active and passive safety, it includes an ESP stability control system, intelligent tire pressure monitoring, hill start assist, hill descent control, TPMS intelligent tire pressure monitoring system, rear parking sensors, rearview camera, TCS traction control system, and RMI rollover mitigation system.
Was this review help?
10
3
Share
ThomasAnn
08/14/25 12:45am
I've been driving the Haval M6 for a while now, and the remote window control is pretty straightforward. Typically, you stand next to the car, press and hold the unlock button on the remote key for a few seconds, and the windows will automatically roll down; press and hold the lock button, and the windows will roll up. This feature is especially great for cooling down the car before getting in during summer—no need to turn on the AC for instant relief. Just be careful not to accidentally leave the windows open in parking lots or crowded areas to avoid security risks. Another handy trick: if you've left valuables in the car and worry about theft, you can remotely close the windows before getting in. It’s a good idea to occasionally check the remote’s battery and the responsiveness of the window system, as prolonged disuse might cause it to malfunction—just mention it during your next 4S店 maintenance visit. Similar features exist in other SUVs, but the Haval M6’s response is notably quick.
Was this review help?
16
0
Share
Expand All
SanSienna
10/09/25 5:18am
As a frequent driver, when using the remote window control feature of my Haval M6, I simply press the key buttons: hold the unlock button to lower all windows, and hold the lock button to raise all windows. Make sure the remote signal is stable when operating, and avoid trying from too far away—usually within two or three steps is sufficient. This design is mainly for the convenience of adjusting the windows after parking without needing to start the engine. If you find the windows not responding to the remote, it might be due to a dead key battery or the vehicle not being in anti-theft mode—check the user manual's settings section. By the way, remotely raising the windows in rainy or foggy weather can prevent rain from entering the car, which is practical, but don't overuse it to avoid excessive battery drain or motor wear. Just perform a simple test periodically.
Was this review help?
19
0
Share
Expand All
CaydenFitz
11/22/25 6:34am
What I love most about driving my Haval M6 is the convenience of remote window control. The process involves holding down the buttons on the remote to move the windows up or down—the unlock button lowers them, while the lock button raises them. This feature allows you to close the windows or let in fresh air even after getting out of the car, saving you the hassle of climbing back in. I use it often when parking in my neighborhood or outdoors, as it's effortless to operate remotely. Just remember not to stand too far from the car, or the signal might weaken. Why did Haval include this? Mainly to enhance the user experience, making it more hassle-free compared to similar features in other brands. Maintenance isn’t complicated either—if the remote stops working occasionally, just replace the key battery, and ensure it doesn’t affect driving safety.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

Why doesn't the car move after releasing the handbrake?

The reasons why a car doesn't move after releasing the handbrake are as follows: 1. Insufficient power assistance: This indicates a decline in the car's performance, resulting in inadequate power assistance and insufficient power to move. 2. Road conditions: Due to the limited power assistance, on very steep roads, the car's power assistance may not be enough to propel the vehicle forward. 3. Handbrake damage: The handbrake, technically known as an auxiliary brake, operates differently from the main brake system. It uses a steel cable connected to the rear brake shoes to apply braking force. Prolonged use of the handbrake can cause the steel cable to undergo plastic deformation, which is irreversible. This long-term use reduces effectiveness and increases the handbrake's travel distance.
7
1
Share

What Causes the Sudden Heavy Steering Wheel in an Audi?

Audi steering wheel suddenly becoming heavy is caused by: 1. Insufficient tire pressure; 2. Contaminated power steering fluid; 3. Internal failure of the power steering system; 4. Poor bearing lubrication. The working principle of a vehicle's steering wheel is to transmit torque to the rack and pinion mechanism, thereby pushing the wheels to turn left or right. Solutions for a suddenly heavy Audi steering wheel include: 1. Replenishing hydraulic power steering fluid; 2. Replacing the circuit fuse; 3. Replacing the flat bearing and adding kingpin grease; 4. Increasing lubrication for the steering tie rod ball joint. Steering wheels are categorized into: single-spoke, dual-spoke, three-spoke, and four-spoke steering wheels.
9
0
Share

What is the difference between a W12 engine and a V12 engine?

The differences between a W12 engine and a V12 engine are: 1. Different structures: The W12 engine has a compact structure that can accommodate more cylinders; the V12 engine has a simple structure with good operational balance and small size. 2. Different arrangement methods: The W12 engine adopts a W-type arrangement; the V12 engine adopts a V-type arrangement. An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, and electric motors. Its function is to convert the heat energy of gasoline into mechanical energy by expanding the gas after combustion in a sealed cylinder to push the piston to do work, thereby providing power for the car.
4
5
Share

What kind of oil should be used for brake fluid?

Brake fluid can be of castor oil alcohol type, synthetic type, or mineral oil type. The steps for replacing brake fluid are: 1. Park the vehicle on a flat surface, turn off the engine, open the hood, and drain the oil from the oil tank; 2. Use a funnel to fill the oil reservoir with new brake fluid; 3. Use a jack to lift the vehicle and start removing the tires from the rear wheels; 4. Remove the rubber dust cap on the brake caliper; 5. Use a wrench to loosen the drain screw and attach a rubber tube to it, connecting it to the drain bottle; 6. Press the brake pedal inside the vehicle while observing the draining process until the oil level in the engine compartment's oil reservoir reaches the lower limit; 7. Start the vehicle and perform a brake test in a relatively safe area.
14
2
Share

Where is the horn relay located in the BMW X1?

BMW X1 horn relay is located in the control cabinet or control box. The working principle of the relay is that when a certain voltage is applied to both ends of the coil, the coil generates current, thereby producing an electromagnetic effect. The armature, under the electromagnetic force, overcomes the pulling force of the return spring and is attracted to the iron core, driving the moving contact of the armature to connect with the stationary contact. Taking the 2021 BMW X1 as an example, it belongs to the compact SUV category, with body dimensions of: length 4565mm, width 1821mm, height 1620mm, wheelbase 2780mm, fuel tank capacity 61L, and trunk capacity 505L. The 2021 BMW X1 is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 140PS, maximum power of 103kW, maximum torque of 220Nm, and is paired with a 7-speed dual-clutch transmission.
14
4
Share

What are the three conditions for a successful automotive claim?

There are three conditions for a successful automotive claim: 1. Three conditions: First, when compared with the contract, the event has caused additional costs to the contractor's project expenses or direct schedule losses. Second, the reason for the increased costs or schedule losses is not attributable to the contractor's behavioral responsibility or risk responsibility as stipulated in the contract. Third, the contractor submits a notice of claim intention and a claim report in accordance with the procedures or time specified in the contract. 2. Automotive claim settlement: Automotive claim settlement refers to the process where the car owner files a claim with the insurance company after a traffic accident. The basic workflow of claim settlement includes steps such as reporting the case, investigation and damage assessment, receiving and reviewing claim documents, calculation and review, approval, compensation, and case closure.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.