How to Remedy a Depleted Car Battery?

2 Answers
MarianaDella
07/25/25 1:08pm
To remedy a depleted car battery, the following methods can be used: 1. Use a voltage between 60 to 300V to charge and repair the depleted battery; 2. After fully charging, completely discharge the battery to activate the active substances inside, thereby increasing the battery capacity; 3. Open the battery cover and inject distilled water into it, then soak for 24 hours to repair the battery. Methods for battery maintenance include: 1. Start the car periodically to charge the battery; 2. Add distilled water or a special replenishing solution when the electrolyte is low; 3. Check if the small holes on the battery cover are ventilated; 4. Inspect the battery's positive and negative terminals for oxidation; 5. Examine all parts of the circuit for aging or short circuits; 6. Turn off all electrical devices when leaving the car.
Was this review help?
9
3
Share
Gwen
08/11/25 8:38pm
Once, my car sat unused in the garage for a month, and the battery drained. That morning, the key fob didn't respond, and the dashboard was completely dark. I quickly grabbed my spare jumper cables and asked my neighbor for help: positioning his car close to mine, then attaching the red clamp to his battery's positive terminal and the black clamp to my car's engine ground. After letting his engine run for a few minutes, I turned the key and successfully started my car. Afterwards, it's best to drive to a repair shop to recharge the battery, as short trips can harm it. I've since made it a habit to start the engine and let it idle for ten minutes once a week when the car is parked for long periods, or to disconnect the negative terminal to cut power. This saves money and hassle, and my battery lasted five years without issues. Now, I also carry a portable emergency jump starter—compact and lightweight, it makes handling such situations easy, so I never panic anymore.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

What are Honda hybrid vehicles?

Honda hybrid vehicles include: Honda Accord, Honda CR-V, Spirior, and Honda Civic. Hybrid vehicles refer to vehicles whose propulsion systems consist of two or more individual propulsion systems that can operate simultaneously. The driving power of the vehicle is provided by the individual propulsion systems alone or in combination, depending on the actual driving conditions. Taking the Honda Civic as an example, it is a model under Dongfeng Honda. In terms of body dimensions, the Civic measures 4649mm in length, 1800mm in width, and 1416mm in height, with a wheelbase of 2700mm. As for the interior, the Civic features relatively fine craftsmanship and a fashionable design with a prominent sense of layering. It is equipped with a variety of functional configurations, although the extensive use of hard plastics results in a less satisfying tactile experience. The seats, however, offer good comfort.
8
4
Share

What is the ground clearance of the Orlando?

The Orlando has an unloaded minimum ground clearance of 180 mm and a loaded minimum ground clearance of 150 mm. The Orlando is a compact hatchback launched by Chevrolet, equipped with a 1.3-liter turbocharged engine. This 1.3-liter turbocharged engine, codenamed L16, delivers a maximum power of 120 kW, a maximum torque of 230 Nm, and reaches its peak power at 5500 rpm. Details about the Orlando are as follows: 1. Exterior: The front fascia incorporates many design elements similar to the FNR-X. The dual grille design, narrower at the top and wider at the bottom, along with the C-shaped air vents on both sides and horizontally arranged headlights, gives the front a very sporty appearance. From the side, it has a full SUV-like presence. The robust and high rear end completely eliminates any sedan-like impression, making the entire vehicle look very stylish. 2. Interior: Predominantly black with orange stitching accents, the overall feel is quite sporty. The 8-inch floating central control screen comes with features such as blind spot warning, automatic high beams, brake force distribution, brake assist, traction control, and ESC.
19
2
Share

Which BMW 1 Series model has a four-cylinder engine?

Both the BMW 1 Series 120i and 125i models feature four-cylinder engines, equipped with 1.5T three-cylinder and 2.0T four-cylinder engines respectively. Specifically, the 120i is powered by a 2.0T four-cylinder turbocharged engine. The BMW 1 Series is a compact sedan under the BMW brand, with body dimensions of 4462mm in length, 1803mm in width, and 1446mm in height, and a wheelbase of 2670mm. In terms of exterior design, the BMW 1 Series adopts the brand's signature styling, featuring the iconic double-kidney grille at the front that offers high recognition, along with exquisitely designed headlights. For configurations, the BMW 1 Series comes equipped with the iDrive system, active cruise control, engine start-stop technology, and BMW remote services, among other features.
11
3
Share

What are the symptoms of carbon buildup in a car?

Symptoms of carbon buildup in a car include the following: 1. Difficulty starting the engine when cold, requiring multiple attempts, while it starts normally when warm. 2. Unstable engine idle speed, fluctuating between high and low. 3. Poor acceleration response when revving, with a noticeable sluggishness. 4. Reduced driving power, especially noticeable during overtaking, with slower acceleration and failure to reach the car's original power level. 5. Highly irritating and pungent exhaust emissions, significantly exceeding standards. 6. Noticeably increased fuel consumption compared to before. Carbon buildup reduces engine power, increases fuel consumption, and in severe cases, can cause valve sealing issues. Treatment methods include the following: 1. Carbon buildup in the intake tract can be cleaned during maintenance at a repair shop. 2. If not severe, driving at high speeds can also help remove carbon buildup, as the high-speed airflow can wash away carbon deposits in the intake tract. 3. Adding fuel additives, such as products like "fuel system cleaners," can help keep the fuel cleaner and also clean existing carbon deposits while slowing down their formation.
8
5
Share

What engine is used in the Baojun 730?

Baojun 730 uses two engines in total, one is a 1.5-liter four-cylinder naturally aspirated engine, and the other is a 1.5-liter four-cylinder turbocharged engine. The 1.5-liter naturally aspirated engine has 105 horsepower and a maximum torque of 135 Nm; the 1.5-liter turbocharged engine has 147 horsepower and a maximum torque of 250 Nm. The Baojun 730 is an MPV model under SAIC-GM-Wuling Baojun, with a body length, width, and height of 4780mm, 1820mm, and 1755mm respectively, and a wheelbase of 2750mm. In terms of appearance, the rear styling of the Baojun 730 has also been significantly adjusted, with reduced chrome strips and an increased tailgate size, occupying the entire horizontal width of the rear; the taillights have been changed from the original split design to an integrated design, with sharp styling and a horizontal LED light strip that is fashionable and eye-catching, giving a sense of technology.
10
4
Share

What is the transmission of the Hyundai ix35?

The transmission brand used in the Hyundai ix35 is Powertech. Hyundai Powertech is a subsidiary of the Hyundai Group in South Korea, specializing in the production of transmissions. Currently, most Hyundai and Kia models on the market use transmissions produced by Hyundai Powertech. The Hyundai ix35 is equipped with a 6-speed automatic transmission and a 7-speed dry dual-clutch transmission. The Dual Clutch Transmission (DCT) differs from conventional automatic transmission systems. It is based on a manual transmission but functions as an automatic transmission, offering the flexibility of a manual transmission and the comfort of an automatic transmission, while also providing uninterrupted power output. When using the transmission of the Hyundai ix35 in daily driving, the following points should be noted: Do not delay changing the transmission oil for extended periods. Prolonged failure to change the transmission oil can damage internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause the transmission to overheat and may result in a noticeable jolt when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers, aiming for smooth operation, may shift into the opposite gear before the vehicle has fully stopped, which can cause significant damage to the transmission gears and may lead to gear grinding or other failures over time. Avoid frequently climbing steep slopes in Drive (D). When facing steep inclines, automatic transmission vehicles may overheat due to high load or may upshift too early, resulting in insufficient power. In such cases, it is advisable to use manual mode to lock in a lower gear or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the transmission in Neutral (N). Towing the vehicle with a rope or directly dragging it should be avoided.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.