How to Rematch the Tire Pressure Monitoring for Haval H6?
3 Answers
Haval H6 tire pressure monitoring rematching method is as follows: First, start the vehicle, then turn the lever on the left side of the steering wheel to select and enter the tire pressure display bar; Secondly, rotate the left lever to "SETCRL" and hold it for 2-3 seconds before releasing, then click the pop-up option "Yes" on the screen to rematch the tire pressure values. Tire pressure monitoring is an automatic real-time monitoring of tire pressure during vehicle operation, alerting the driver to tire leaks and low pressure to ensure driving safety. There are three commonly used tire pressure monitoring methods: Direct tire pressure monitoring: Uses pressure sensors installed in each tire to directly measure tire pressure. A wireless transmitter sends the pressure information from inside the tire to a central receiver module, which then displays the tire pressure data. Indirect tire pressure monitoring: When the pressure of a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other wheels. By comparing the rotational speed differences between tires, the system monitors tire pressure. Introduction to Tire Pressure Monitoring System (TPMS): It combines the advantages of both systems mentioned above, equipping direct sensors in two diagonally opposite tires and an indirect system for all four wheels. This hybrid system can reduce costs and overcome the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time data of the actual pressure in all four tires like the direct system. Continuous monitoring.
When I first bought my Haval H6, I also encountered the issue of resetting the tire pressure monitoring system. The process isn't difficult, but you need to be careful. First, park the car on a level surface without starting the engine—just turn the ignition to the ACC or ON position, and the central display will light up. Then, use the buttons on the steering wheel to navigate to the settings menu, find the vehicle settings or tire pressure option, and follow the prompts to select the reset or learning mode. Remember, before resetting, ensure all four tires are inflated to the standard pressure, usually indicated on a label on the door frame, such as around 220 kPa. After the system confirms the reset, drive a short distance to let it calibrate automatically. If the screen shows a fault, it might be due to a loose fuse or dirty sensor—it's best to check and clean them. Last time, I reset without adjusting the tire pressure properly, and the warning light kept flashing, wasting my time. For safety, after completing the reset, manually check if the tire pressure is stable—this can save you a lot of trouble and repair costs.
Resetting the tire pressure monitoring system on the Haval H6 feels like playing a tech game—you need to follow step-by-step operations in the vehicle's system. First, park the car in a safe location with the engine off but the power on, which can be done via the key or button. Then, use the steering wheel buttons or the central touchscreen to navigate to the settings menu, where you'll find a tire option and select the reset function. The screen will guide you through the process, sometimes requiring a few seconds for initialization. Personally, I prefer checking if the tire pressures are consistent first using a portable tire pressure gauge to avoid false alarms from the system. After resetting, take a short test drive—if the monitoring light behaves normally, it means the reset was successful. If errors occur midway, it might be due to weak sensor batteries or wiring issues, so it's advisable to regularly clean the wheel hubs to maintain reliable connections. The whole process takes less than ten minutes but ensures safer long-distance driving by preventing blowout risks.
