How to release the windshield washer fluid in Haval M6?
3 Answers
To release the windshield washer fluid in Haval M6, pull the lever on the right rear side of the steering wheel toward the driver's direction and hold for two seconds. The Haval M6 is a compact 5-door, 5-seat SUV with the following dimensions: length 4664mm, width 1830mm, height 1729mm, and a wheelbase of 2680mm. It is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 110 kW at 5600-6000 rpm and a peak torque of 210 Nm at 1800-4400 rpm. The drivetrain configuration is front-engine, front-wheel drive. The front suspension uses MacPherson strut independent suspension, while the rear suspension employs double-wishbone independent suspension.
I've been driving a Haval M6 for several years, and using the windshield washer fluid is quite straightforward. Sitting in the driver's seat, after starting the vehicle, locate the wiper control stalk on the right side of the steering wheel—it looks like a small lever. Gently push it forward or pull it upward (depending on the model's settings), and the washer fluid will spray onto the windshield. Under the hood, there's a washer fluid reservoir, usually near the front-left side of the car, with a blue or white cap marked with a wiper icon. When refilling, simply open the hood and pour in tap water or store-bought professional washer fluid. In summer, regular fluid works fine for removing grease, while in winter, opt for an antifreeze type to prevent freezing. I recommend checking the fluid level monthly to avoid damaging the pump if it runs dry. If the spray weakens, the nozzle might be clogged—just clean the holes with a needle. This system is low-maintenance and hassle-free. Making it a habit ensures clear visibility and safe driving, especially in rain or dusty conditions. Don't overlook these small details—keeping your windshield clean is crucial.
As a car enthusiast, I'm very familiar with the windshield washer operation of the Haval M6. The water release process is simple: just operate the windshield washer button or lever on the wiper stalk while driving, and a gentle press will spray the washer fluid. The washer fluid reservoir in the engine bay is clearly positioned at the front left side with a small water droplet symbol on the cap, making it super convenient to refill. I often use mild detergent mixed with water to top it up, avoiding soapy water to prevent clogging. Regularly check that the fluid level doesn't drop below the minimum line to prevent pump humming and wear; also adjust seasonally by switching to antifreeze in cold weather to protect the entire system. If you find the spray isn't working, check the hose connections or nozzle direction - a simple adjustment can restore smooth operation. I make it a habit to glance at the reservoir condition before driving every week, maintaining this routine keeps the car in better shape effortlessly.
