···
Log in / Register

How to Reduce Car Noise?

3 Answers
EllieAnn
07/23/25 7:08pm
Methods to reduce car noise: 1. Before performing car sound insulation, first check the vehicle condition. Some noises are caused by the vehicle's own faults, such as abnormal tire pressure or irregular wear; 2. For engine noise, you can paste an advanced sound-absorbing foam acoustic material under the hood. This can not only absorb and consume a large amount of engine noise but also suppress hood vibration and block heat from the engine, protecting the car paint surface from high-temperature damage; 3. Use damping plates or specialized damping plates, sound-absorbing pads, and door sealing strips to comprehensively treat the fender, floor, and doors. This can improve tire and road noise from three sources: vibration reduction, sound absorption, and sound insulation.
Was this review help?
3
4
Share
PeytonRose
08/10/25 2:39pm
As a seasoned driver with over a decade of experience, I often think about how to make the car quieter. The noise mainly comes from the engine, tires, and wind resistance, which can be quite annoying. My advice is to first check the tire wear—excessive wear can cause a humming sound; switching to low-noise tires shows immediate results. Next, regular maintenance of the suspension system is key—loose bearings or worn shock absorbers can amplify vibration noise. I also DIY by adding soundproofing materials inside the doors and trunk—affordable soundproofing foam bought online does the trick for just a few bucks. If the engine noise is loud, it might be due to aging belts or a dirty air filter—timely replacement can reduce a lot of unwanted sounds. Driving habits matter too—I avoid sudden acceleration and braking, as smoother driving cuts noise by half. Always remember to close doors and windows properly when parked, as damaged seals let in whistling wind noise. Finally, using a noise-testing app helps monitor issues early—fixing problems promptly keeps the cabin quiet, making long drives much more comfortable.
Was this review help?
16
4
Share
Expand All
LaAnnie
09/22/25 9:37am
When working at the auto repair shop, I often encounter customers complaining about noisy car interiors. Here's a simple guide to fix it. Common sources include loose suspension components or worn engine accessories—check the shock absorber bearings and exhaust pipe brackets, and tighten them with a wrench. Tires are another key factor; low pressure or worn treads increase road noise, so check tire pressure monthly and maintain the standard value. Engine noise might stem from a dirty air filter or aging spark plugs—replacing them can bring noticeable quietness. For wind noise, inspect if the door seals are cracked and apply sealant to reduce whistling. Additionally, installing underbody panels or soundproofing mats can absorb vibration noise. Don’t overlook routine maintenance—low engine oil or coolant levels increase friction noise. Try these methods step by step, and the squeaks inside the car will reduce significantly.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

What suspension does the Hanteng X5 use?

The Hanteng X5 uses a MacPherson independent suspension for the front suspension and a torsion beam non-independent suspension for the rear suspension. Here are detailed introductions to the two types of suspensions: 1. The MacPherson suspension is a relatively simple independent suspension structure, and this type of suspension is widely used. The MacPherson suspension has only one L-shaped control arm, which occupies very little space. The MacPherson suspension hardly takes up any space in the engine compartment, so many cars with front transverse engines use the MacPherson front suspension. 2. The torsion beam suspension is a relatively common non-independent suspension, and its structure is also quite simple. Generally, cheaper cars use the torsion beam non-independent suspension for the rear suspension. This type of suspension has a low cost, and using a torsion beam for the rear suspension can also expand the trunk space and the rear seating space. Space is particularly important for family cars.
18
4
Share

What are the dimensions of the 2019 Dongfeng Renault Captur?

2019 Renault Captur has a length of 4263mm, width of 1797mm, and height of 1593mm, with a wheelbase of 2638mm. Here are the specific details about it: 1. It comes with 18-inch two-tone diamond-cut alloy wheels. 2. In terms of exterior design, the front face of the new car is very full, featuring the latest family-style headlight design. The headlights and grille are interconnected, with side-by-side fog lights below and a large trapezoidal air intake, giving the front end a particularly strong presence. To meet the needs of young consumers, the new car offers multiple color options. 3. In terms of power, the new car is equipped with a 1.3T four-cylinder high-performance turbocharged engine, with a maximum power output of 154 horsepower, paired with a 7-speed wet dual-clutch transmission. This powertrain delivers excellent performance, providing drivers with a 'thunderous driving' experience. It also integrates multiple intelligent technologies and safety configurations, making it a trendy choice for today's young drivers.
7
4
Share

Where is the fuel filter located on the BYD F3?

The fuel filter of the BYD F3 is installed in front of the fuel tank at the bottom of the vehicle body, secured with disposable clips at both ends. Additional information: 1. The replacement interval for the fuel filter is generally 10,000 km, with a mandatory replacement interval of 30,000 km. If the fuel contains a high amount of impurities, the driving distance should be shortened accordingly. 3. When removing the BYD F3 fuel filter, use pliers to cut off the clips. There is usually an arrow on the fuel filter indicating the direction of fuel flow; during installation, ensure the arrow points toward the fuel inlet direction. If the original disposable clips are not available for both ends of the fuel filter, hose clips of the same diameter can be used as a substitute, but they must be tightened securely. Never use wire for fixation. After installation, start the engine and let it run for a few minutes to ensure there are no fuel leaks.
5
4
Share

What is the best fuel grade for the Ford Mondeo?

It is recommended to use 95-octane fuel for the Ford Mondeo, as it is equipped with a turbocharged engine and 95-octane fuel offers better stability. Below are additional details about this vehicle: 1. Body dimensions. The Ford Mondeo measures 4873mm in length, 1852mm in width, and 1470mm in height, with a wheelbase of 2850mm. 2. Powertrain. The Ford Mondeo delivers a maximum horsepower of 182 HP and a maximum power output of 134 kW, with a maximum power speed of 6000 rpm. It features a MacPherson strut front suspension and a multi-link rear suspension. The tire specification is 235/50R17. 3. Capacity. The fuel tank has a capacity of 62.5L, and the trunk space ranges from 516L to 986L.
2
5
Share

What grade of engine oil does the Axela use?

Axela uses 5W30 or 0W30 grade engine oil. Here is relevant information: 1. Engine oil is known as the blood of the engine, serving functions such as lubrication, cleaning, sealing, heat dissipation, buffering, and rust prevention in the engine. Engine oil lubricates and reduces friction, aids in cooling, seals against leaks, prevents rust and corrosion, and provides shock absorption. Without engine oil, the engine cannot function properly. 2. Before changing the engine oil, the vehicle's engine should be turned off for 30 minutes to allow the oil adhering to the cylinder walls to flow back into the oil pan; otherwise, residual oil may remain. 3. The engine oil needs to be inspected, which can be done using the oil dipstick. The first time the dipstick is pulled out, it should be wiped clean with a tissue and reinserted before pulling it out again to check the oil level. The dipstick has two marks: an upper limit and a lower limit. The oil level should be between these two marks for normal operation.
5
1
Share

Is a C1 driver's license not allowed to drive motorcycles?

C1 driver's license does not permit the holder to drive motorcycles. To drive a motorcycle, the driver must possess a D, E, or F driver's license. The vehicle types permitted under a C1 license are: The scope of a C1 driver's license includes small and micro passenger vehicles, as well as light and micro cargo vehicles; light, small, and micro special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer. Vehicles not permitted under a C1 license: Large buses, tow trucks, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, a C1 license does not permit driving vehicles with more than 9 seats or trucks with a total length exceeding 6 meters. C1 driver's license: The C1 driver's license is one of the codes for motor vehicle driver's licenses. The scope of a C1 driver's license includes small and micro passenger vehicles and light and micro cargo vehicles.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.