How to recline the seats in the Koleos?

2 Answers
VanJasmine
07/25/25 4:29pm
To recline the seats in the Koleos, adjust the backrest angle by pulling it forward or backward. Pushing forward tilts it forward, while pulling backward tilts it backward. To lower the headrest, press the adjustment button located next to the two support rods of the headrest or on the side of the headrest, then pull the headrest up or down. To adjust the seat height: 1. Locate the height adjustment lever on the driver's seat. 2. Lift the lever to adjust the seat height. To clean the seats: 1. Spray an appropriate amount of leather cleaner onto the leather seats, covering the surface. 2. Wait for 3 to 5 minutes to allow the cleaner to dissolve stains thoroughly. 3. Wipe off the stains and cleaner with a soft, dry cloth. To maintain the car seats: 1. Remove protective plastic bags promptly. 2. Install a suitable seat cover or cushion. 3. Wipe the seats regularly. 4. Dust the seats frequently. 5. Keep seats away from heat sources. 6. Avoid exposing seats to direct sunlight.
Was this review help?
15
4
Share
BradleyDella
08/11/25 9:51pm
I drive frequently, especially for weekend outings, and the method to fold down the KAIYUE seats is quite intuitive. There's a plastic handle near the bottom of the seatback on the outer side—just give it a gentle pull to fold the seatback forward, which is handy for storing luggage or taking a rest. Be sure to operate it softly and avoid excessive force, as the plastic material might be fragile, and repairs can be troublesome if broken. After folding, remember to push and test it a few times to ensure it's locked securely—otherwise, it could loosen while driving, which is dangerous. Once, I didn’t lock it properly, and a package fell out during a turn, damaging the window. For maintenance, wiping the handle area with a cloth can extend its lifespan, making daily storage much more convenient. Small cars already have compact space, so folding the seats to free up room is really practical, especially for handling large items during shopping or trips.
Was this review help?
14
2
Share
Expand All
More Forum Discussions

Can I apply for a Class B license immediately after obtaining a Class D license?

No. You must wait for one year after obtaining a Class D license before you can apply for a Class B license. Here is relevant information: Class B: A Class B license allows driving all vehicle types below large trucks, specifically divided into B1 which permits driving medium-sized passenger vehicles (including urban buses with 10-19 passengers); B2 permits driving heavy and medium-duty trucks; and large, heavy, and medium-sized special purpose vehicles. Driver's License: The full name is Motor Vehicle Driver's License, also known as a "driver's license," which is a legally required certification for operating motor vehicles. Driving a motor vehicle requires certain skills, and without these skills, driving randomly may lead to traffic accidents. Generally, individuals cannot drive on the road without a license.
12
1
Share

What is the difference between single-piston and dual-piston calipers?

Dual-piston calipers and single-piston calipers differ in their design approach. Below are the key distinctions: Single-piston calipers: Most single-piston calipers found on production vehicles utilize a one-way piston configuration. The brake pad on the opposite side is pushed by the reaction force of the caliper, hence they are also referred to as "floating calipers." Dual-piston calipers: With dual-piston calipers, both the inner and outer sections of the caliper remain stationary. The clamping force for the inner and outer brake pads is independently managed by pistons on opposite sides, earning them the name "fixed calipers." When comparing single-piston and multi-piston calipers, single-piston designs often leave unused space that cannot be filled. To minimize the overall caliper size while maximizing piston area, dual-piston calipers were developed.
13
2
Share

How to Access the Rear Seats of a Mustang?

To access the rear seats of a Mustang, follow these steps: There is a handle on each of the front seats. Lift the handle upwards to release the seatback, then push the seatback forward to gain access to the rear seats. Taking the 2020 Mustang as an example, its body dimensions are: length 4794mm, width 1916mm, height 1391mm, with a wheelbase of 2720mm. The fuel tank capacity is 58.9 liters, and the curb weight is 1702kg. The 2020 Mustang features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.3T turbocharged engine, delivering a maximum horsepower of 299PS, a maximum power of 220kW, and a maximum torque of 434Nm, paired with a 10-speed automatic transmission.
16
0
Share

At What Speed to Shift Gears?

Here is a detailed introduction on when to upshift based on speed: First gear: Start moving, gently release the clutch, and shift to second gear when speed exceeds 10 km/h. Second gear: Normally drive until speed exceeds 20 km/h before shifting to third gear. Third gear: Shift to fourth gear when speed exceeds 35 km/h. Fourth gear: Shift to fifth gear when speed exceeds 45 km/h. For vehicles with 6 or more gears: Upshift approximately every 15 mph increase in speed. Additional information: Reducing carbon buildup: Normally, the engine speed during gear shifts should be around 2500 RPM. Shifting at this point helps reduce engine carbon deposits. Vehicle shudder: If the engine speed is too low during shifting, the vehicle may shudder, indicating the engine is operating at low speed with high load, which can be harmful to the vehicle.
20
4
Share

Where is Hongyan Trucks produced?

Hongyan Trucks factory is located at Huanghuan North Road, Jinshan Avenue, New North District, Chongqing. The following is an introduction to Hongyan Trucks: Introduction to Hongyan Trucks: The manufacturer of Chongqing Hongyan Trucks is SAIC-IVECO-Hongyan Commercial Vehicle Co., Ltd., a professional heavy-duty vehicle manufacturer producing various models including dump trucks, tractors, cargo trucks, transport vehicles, concrete mixers, fuel tankers, and sanitation vehicles. Hongyan Trucks models: The Hongyan "Genlyon" dump trucks and cargo trucks inherit the excellent performance of Hongyan chassis in terms of frame, drive axle, durability, reliability, and load-bearing capacity. Based on this, optimizations have been made to the engine cooling system, intake and exhaust systems, and engine mounting system.
13
1
Share

Can I Get My Car Inspected on Saturday?

Policies vary by region, but currently most areas allow vehicle inspections on Saturdays and Sundays. Here are the new regulations for vehicle annual inspections in 2021: Exemption Scope: The exemption scope for motor vehicles has been expanded from the original 6 years and under for vehicles with ≤6 seats to now include non-operational mini and small passenger vehicles with 7-9 seats. Inspection Cycle: Vehicles exempt from inspection can avoid on-site testing for the first 6 years, only requiring procedural processing every two years. For years 6-10, inspections are required annually. According to the new policy, the inspection cycle for private vehicles remains unchanged for the first 6 years, while vehicles aged 6-10 years will change from annual inspections to biennial inspections. This means exempt vehicles will have biennial inspections within 10 years, with only the 6th and 8th years requiring on-site testing.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.