How to Read Tire Size?

Can You Slam the Brakes All the Way Down in a Car?

When driving normally, especially at high speeds, it is advisable to avoid sudden braking as much as possible. Firstly, to prevent the vehicle from skidding and losing control of its direction; secondly, to avoid rear-end collisions with vehicles behind. Below are some additional details: 1. If the vehicle does not have an ABS system: It is necessary to use the "pump braking" method, which involves pressing the brake pedal and then releasing it repeatedly until the speed decreases. This allows the wheels to slow down while still moving, ensuring safer braking. 2. In rainy or snowy weather: The road surface is more slippery, and in such conditions, the "pump braking" method should also be used.

9

3

Share

What does Dual Engine mean?

Dual Engine means 'two power engines'. Here is some extended information: 1. Dual Engine: Dual Engine is not simply the superposition of two sets of power. It is an organic combination and coordinated operation of the engine and the motor. Under such coordination, the motor provides power during starting and low-speed driving, while the engine takes the lead and the motor assists during high-speed driving and acceleration. During deceleration, the vehicle can also convert the excess energy generated by deceleration and recover it into the battery. Features include front seat heating, electric seat adjustment, lumbar support adjustment, cruise control, and rain-sensing wipers. 2. Warranty: The HB automatic high-beam adjustment system, nanoe nano-water ion air conditioning system, etc., do not require regular replacement or special maintenance, and are equipped with safety protection devices that can automatically cut off power supply in case of external force impact to ensure safety. Dual Engine has formulated a series of exclusive services centered on the Dual Engine Club. The entire vehicle enjoys a worry-free warranty of 3 years or 100,000 kilometers, and the hybrid battery is uniquely covered by an extended warranty of 8 years or 200,000 kilometers, allowing consumers to drive with peace of mind.

13

1

Share

What does it mean when the yellow light of the one-button start keeps flashing?

If the yellow light of the Roewe one-button start keeps flashing, it may be due to affected wiring contacts, a weak car battery, key sensing issues, or a locked steering wheel. The specific reasons for the flashing yellow light are as follows: Wiring Contact Issues: It could be caused by the installation of a dashcam or other electrical devices affecting the contact of other wiring, leading to the yellow light flashing. First, check the wiring and try reconnecting it. Weak Battery: If the car battery is weak, it may also cause issues with the one-button start. In this case, replacing the battery is a better option. Key Sensing Issues: If there is a strong magnetic field nearby, it can interfere with electronic devices, making it impossible to detect the key. You can point the key directly at the one-button start or quickly move away from the area. Locked Steering Wheel: A locked steering wheel is a normal anti-theft feature. This occurs when the steering wheel is turned after the car is turned off, causing the car's computer to assume a theft situation and automatically activate the anti-theft function. First, press the one-button start once, then step on the brake, turn the steering wheel, and press the one-button start again.

20

3

Share

Are all new energy vehicles automatic transmission?

All currently available electric vehicles have only one forward gear. Therefore, there is no distinction between manual and automatic transmissions in electric vehicles. Here is more information about new energy vehicles: 1. Structure: Taking pure electric vehicles as an example in terms of vehicle construction, pure electric vehicles use three electric systems as the power source, and there is no transmission in the power structure. 2. Working principle: In terms of power generation during operation, pure electric vehicles provide electrical energy from the battery to the motor, which drives the motor to operate and thus propels the vehicle forward.

15

0

Share

What are the causes of transmission limp mode failure?

The causes of transmission limp mode failure include computer transmission issues, errors in vehicle boost pressure deviation, problems with the vehicle's wiring system, and battery acid leakage. There is no need to worry or feel stressed when limp mode occurs; it indicates that the vehicle requires a thorough inspection and comprehensive repairs where issues are identified. Below is an introduction to transmissions: 1. Classification of transmissions: Transmissions are divided into manual transmissions and automatic transmissions. Manual transmissions consist of gears and shafts, while automatic transmissions are composed of components such as torque converters and planetary gears. 2. Development and reform of transmissions: With the continuous development of the automotive industry, transmissions have evolved from manual transmissions in the past to automatic transmissions today. Transmissions allow the vehicle to move in reverse without changing the engine's rotation direction, and shifting to neutral can interrupt power transmission for engine starting and gear shifting. Owners using automatic transmissions can easily operate their vehicles, and compared to manual transmissions, automatic transmissions are less prone to malfunctions.

13

4

Share

What is the difference between registering a car in a different location and locally?

There is no difference in the license plates themselves between registering a car in a different location and locally. However, buying a car locally and registering it with an out-of-town license plate may have several impacts: the annual inspection may be more troublesome; there may be some inconveniences when traveling, such as traffic restrictions—local license plates have fewer restrictions while out-of-town plates have more; sometimes, traffic violation handling may need to be done at the registration location. Below is additional information: 1. Provide relevant materials: After purchasing a car in a different location, you need to ensure that the materials provided by the 4S store are complete, such as the car invoice, vehicle certification, maintenance manual, etc. These items are essential, and if the 4S store fails to provide any one of them, it will affect the subsequent registration and maintenance of the new car. 2. The vehicle must have a formal invoice, certification, purchase tax, and compulsory insurance. Any new car purchased from a formal car trading market nationwide can be registered at the place of residence. Compulsory insurance can be purchased at the 4S store, and other commercial insurance can be purchased in two ways: the first is to purchase insurance at the point of purchase, but be sure to choose a large insurance company that can provide coverage and claims nationwide.

8

5

Share

How to Read Tire Size?

Can You Slam the Brakes All the Way Down in a Car?

What does Dual Engine mean?

What does it mean when the yellow light of the one-button start keeps flashing?

Are all new energy vehicles automatic transmission?

What are the causes of transmission limp mode failure?

What is the difference between registering a car in a different location and locally?

What causes the brake light to stay on?

What are the differences between National III and National IV vehicles?

What Are the Causes of a Vehicle Tire Blowout?

What Causes a Sudden Loss of Power in a Car?