How to Read the Water Temperature Gauge in a Honda Car?

1 Answers
MacJack
07/30/25 7:16am
Honda car water temperature can be identified through the water temperature gauge and warning light. When the engine water temperature is about to rise into the high-temperature zone, the water temperature gauge will light up. At this point, you should stop the car, unload the engine load, but do not turn off the engine. Let the engine idle for about 5 minutes before turning it off. Then wait for the water temperature to gradually drop, and once the water temperature indicator returns to normal, you can start the car and continue driving. Taking the Honda City model as an example: the body length is 4450mm, width is 1695mm, height is 1477mm, wheelbase is 2600mm, the upper height of the trunk is 540mm, width is 1010mm, depth is 880mm, and the volume is 485 liters.
Was this review help?
14
1
Share
More Forum Discussions

Is it no longer necessary to affix labels on passenger cars?

2021, vehicles no longer require any labels to be affixed. Vehicle Annual Inspection: Vehicle annual inspection primarily involves basic exterior checks and examination of the performance of various mechanical systems, including emissions, brakes, chassis, side slip, horn, speed, and lights. Consequences of Not Undergoing Annual Inspection: If a vehicle is found by traffic police on the road without having undergone the annual inspection, the owner may face fines or have the vehicle impounded. Additionally, in insurance contracts, vehicles that have not undergone timely annual inspections are considered unqualified. In the event of an accident, the insurance company is not obligated to provide compensation. Annual Inspection Schedule: For new vehicles, the annual inspection is required every two years. The owner must personally bring the vehicle registration certificate and compulsory traffic insurance policy to the designated annual inspection window at the vehicle management office to apply for the annual inspection label.
2
2
Share

What is the maintenance interval for the BYD Qin Plus-DMI?

Here are the detailed maintenance intervals for the Qin Plus-DMI: 1. Filters: The oil filter must be replaced during every routine maintenance. The air filter can last for 20,000 kilometers, requiring only cleaning at the 7,500-kilometer mark. The lifespan of the fuel filter depends on the quality of the fuel used. If you consistently refuel at reputable gas stations and experience no fuel supply issues, you can consider replacing it after 20,000 kilometers. 2. Brake pads: Under normal usage conditions, brake pads can last 30,000-40,000 kilometers, and the original battery can last 3-4 years. 3. Spark plugs: There are various types of spark plugs. Standard nickel-alloy spark plugs can last 20,000-30,000 kilometers, platinum spark plugs can last 80,000-100,000 kilometers, and iridium spark plugs can last 30,000-40,000 kilometers. You can adjust the service life of these components and fluids based on the vehicle's maintenance manual and actual driving conditions.
7
5
Share

Can I bring a temporary ID for the subject 4 test in Deyang?

You can bring a temporary ID for the subject 4 test in Deyang. Reasons why a temporary ID is acceptable for the subject 4 test: A temporary ID is acceptable for the subject 4 test because it holds the same legal validity as a regular ID. You just need to go to any police station (even non-local ones) with your household registration booklet, a recent one-inch black-and-white photo (with the same size standards as a regular ID), and pay the processing fee. You can obtain the temporary ID on the same day. Other methods: In some places, providing your ID number or presenting your household registration booklet or residence permit may also allow you to take the subject 4 test. However, specific procedures should be confirmed with the local vehicle management office, as not all regions permit this.
6
1
Share

Where is the air conditioning switch for BMW X3?

BMW X3's air conditioning filter is located in the engine compartment. Here are some tips for using the car air conditioning: 1. Ventilate before turning it on: After the car has been exposed to the sun for a long time, open all four doors and the sunroof to allow air to circulate inside the car for 3 minutes. This will quickly lower the interior temperature, making the air conditioning more effective when turned on. 2. Use the recirculation mode wisely: Recirculation mode blocks the hot air outside, creating a sealed space inside the car, allowing the air to circulate quickly under the effect of the air conditioning for rapid cooling. Once the interior temperature has dropped, it is recommended to switch to fresh air mode every 30 minutes to purify the air inside the car, then switch back to recirculation mode after 5 minutes. 3. Turn off the air conditioning in time: Turn off the air conditioning 5 minutes before parking to protect the engine and save fuel.
3
1
Share

Why is the USB drive not displaying in BYD Song Classic?

Possible reasons for the USB drive not responding when plugged into the car: Loose USB connection: Since the USB drive is often left plugged into the car's USB port for extended periods, the vibration and movement of the vehicle while driving can cause it to become loose. Once loose, the car's USB port may suddenly stop reading the drive. Damaged USB drive: While less likely, the possibility of a damaged USB drive cannot be ruled out, especially given the less-than-ideal conditions inside a car (particularly during high summer temperatures). Damaged USB port: The chance of a damaged USB port is even smaller than that of a damaged USB drive, but if the above possibilities are ruled out, a faulty USB port could be the cause.
13
2
Share

What Type of Engine Oil Should Japanese Cars Use After 100,000 Kilometers?

For Japanese cars after 100,000 kilometers, it is recommended to use 5W-30 full synthetic engine oil. The functions of engine oil are introduced as follows: Lubrication and Wear Reduction: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing shells. To prevent excessive wear of parts, an oil film must be established between the two sliding surfaces. A sufficiently thick oil film separates the relatively sliding part surfaces, thereby reducing wear. Cooling: Engine oil can carry heat back to the oil tank and then dissipate it into the air, helping the radiator cool the engine. Cleaning: High-quality engine oil can carry carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank through circulation. The flow of the lubricating oil washes away contaminants generated on the working surfaces of the parts.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.