How to Read the Vios Fuel Gauge?

2 Answers
BrielleAnn
07/29/25 4:58pm
Vios fuel gauge reading method: The pointer-type fuel gauge shows a full tank when the pointer is at F; the closer it is to E, the lower the fuel level, indicating less fuel. The Vios instrument panel is located behind the steering wheel. The leftmost gauge is the engine tachometer, the larger middle gauge is the vehicle speedometer, and the rightmost gauge is the fuel tank gauge. The current gear position information can be seen on the LCD screen. The dimensions of this car are 4420mm in length, 1700mm in width, and 1490mm in height, with a wheelbase of 2550mm. It is equipped with a 1.5T engine, delivering a maximum power of 79kw and a maximum torque of 140nm.
Was this review help?
20
1
Share
DiIris
08/14/25 7:00am
When I first started driving the Vios, I was quite confused about the fuel gauge. The round dial on the left side of the dashboard is the fuel gauge, ranging from E (Empty) to F (Full), with the needle position indicating the current fuel level. After starting the car, the needle naturally rises and stops somewhere in the middle or elsewhere, allowing you to estimate how much fuel is left. Beginners often get nervous, so when the needle approaches E, a bright yellow fuel warning light will flash, reminding you to refuel promptly and avoid running out of gas. I recommend glancing at the dashboard frequently, especially after long drives, to prevent breaking down midway. The Vios' fuel gauge is simple and intuitive, and you'll get the hang of it after a few tries. Combined with the average fuel consumption, you can even calculate the remaining mileage, but don't rely on it too precisely to avoid unexpected situations.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

Why is the engine fan particularly loud?

The main reasons for the engine fan being particularly loud are as follows: Lack of lubrication in the blower bearing: It may be due to a lack of lubrication in the blower bearing or the presence of foreign objects inside the blower. The solution is to add lubricating oil to the blower bearing. If the noise is caused by foreign objects, simply remove them. If the above methods do not resolve the issue, replacing the blower with a new one may be necessary. Noise from the compressor belt: The noise could be due to a damaged tensioner pulley of the compressor belt or a malfunctioning compressor. This type of noise is usually located in the engine compartment and is easy to identify.
9
4
Share

Must a right turn pass through the stop line?

Strictly speaking, a right turn must pass through the stop line, but many drivers turn without crossing the stop line and are rarely penalized. Conditions under which a right turn is allowed: Generally, traffic regulations permit vehicles to make a right turn directly from the right lane without interfering with vehicles proceeding on a green light. Conditions under which a right turn is prohibited: When there is a separate right-turn arrow signal light showing red; when auxiliary signs such as "No right turn on red" or "Right turn prohibited on red" are displayed at the traffic signal.
10
3
Share

What does motorcycle jerking mean?

Under normal driving conditions, a motorcycle should not experience jerking when the throttle is released. However, if the gear and speed are mismatched, such as high gear at low speed or low gear at high speed, jerking may occur when the throttle is released. Motorcycle malfunction: Generally, a motorcycle malfunction causes jerking when accelerating, and jerking when releasing the throttle can confirm whether the gear is too low. Excessive carbon buildup: Many malfunctions are caused by carbon buildup, and some vehicles may experience jerking related to carbon deposits. It is recommended to regularly clean carbon deposits. Transmission damage: Persistent dirt and impurities inside the transmission, especially when accumulated in the valve body, can cause blockages, preventing effective oil pressure regulation and leading to jerking, impact, or slipping issues.
18
5
Share

What is the fuel consumption of the Mazda6 Atenza 2.5?

The Mazda6 Atenza 2.5 currently has three models on sale. Among them, the 2021 2.5L Skyactiv-G Supreme Edition is equipped with a 192-horsepower engine, with an NEDC fuel consumption of 7L per 100km. The 2021 2.5L Skyactiv-G Premium Edition and Sport Edition, also equipped with a 192-horsepower engine, have an NEDC fuel consumption of 7.1L per 100km. The fuel tank capacity of the Mazda6 Atenza 2.5 is 56.2L. The distance each model can travel on a full tank is as follows: 2021 2.5L Skyactiv-G Supreme Edition: 56.2/7*100=802km on a full tank. 2021 2.5L Skyactiv-G Premium Edition and Sport Edition: 56.2/7.1*100=791km on a full tank. Vehicle fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption include: Driving habits: Aggressive driving behaviors such as rapid acceleration, frequent overtaking, and not easing off the throttle before stopping at traffic lights can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger engines typically produce more power, requiring more gasoline for combustion. Heavier vehicles also tend to have higher fuel consumption due to the greater driving torque needed. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous terrain increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline for combustion, which increases fuel consumption. Additionally, in low temperatures, the engine control unit may command higher idle speeds to warm up the engine, further increasing fuel consumption.
16
5
Share

What are the reasons for oil leakage in the Ninja?

There are several main reasons for oil leakage in the Ninja: Excessive transmission oil: A small portion of the issue is due to excessive transmission oil, which increases the resistance of the transmission gears. When the gears are overworked, internal pressure rises, leading to loosened oil seals and ultimately causing oil leakage. Therefore, it is essential to follow the maintenance manual for oil refilling. Worn oil seals: When the front and rear oil seals of the crankshaft and the oil pan gasket are damaged to some extent, it can also result in engine oil leakage. Improper installation of gear cover gasket: If the timing gear cover gasket is improperly installed during assembly or is damaged, it can cause screw loosening and oil leakage.
5
1
Share

Where are Mann oil filters produced?

Mann oil filters are produced in many locations, but most of them are manufactured in South Korea and China. Introduction to oil filters: An oil filter, also known as an oil purifier, functions to remove impurities, gums, and moisture from the oil, delivering clean oil to various lubrication points. Function of oil filters: An oil filter is a component that filters engine oil. Engine oil contains a certain amount of gums, impurities, moisture, and additives. During engine operation, metal particles generated by friction between components, impurities from the intake air, and oil oxidation products are all filtered by the oil filter. If the oil is not filtered and directly enters the oil circulation system, it will adversely affect the performance and lifespan of the engine.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.