How to Read a Car Tire Pressure Gauge?

1 Answers
Elena
07/29/25 11:28am
Reading a car tire pressure gauge involves the following methods: 1. For digital gauges, there is usually an activation button on the display. Press it to light up the screen; 2. For analog (pointer-type) pressure gauges, pay attention to the unit of measurement; 3. Portable tire pressure gauges can only measure and release air but cannot inflate the tires. Steps to use a car tire pressure gauge: 1. Press the clip and align it with the tire valve; 2. Push it forward until the valve is secured, then release the clip; 3. Check if the displayed value is within the normal range. Digital gauges will directly show the pressure value.
Was this review help?
20
5
Share
More Forum Discussions

Is it necessary to replace a damaged control arm bushing?

It is necessary to replace a damaged control arm bushing. Below are the methods for replacing control arm bushings: 1. Method one: After lifting the car with a jack, place bricks around the vehicle for added safety (though this step is optional). 2. Method two: Remove the bushing by detaching both ends of the control arm, select an iron sleeve of corresponding size, and install the new bushing. Note that large bushings are side-specific (marked with L for left and R for right), while small ones are universal. 3. Method three: Remove the screws during disassembly. A gentle pull will detach the worn bushing. A damaged bushing causes abnormal noises, creates play in tire movement (accelerating wear on tie rods, stabilizer bars, and shock absorbers), and makes the wheel feel loose when driving over bumpy roads.
13
1
Share

What are the three Japanese automotive giants?

The three Japanese automotive giants are the Accord, Camry, and Teana. Below is an introduction to the Accord: 1. Overview: The Accord is a mid-size sedan first introduced by Honda Motor Co., Ltd. in 1976. In Taiwan, it was initially marketed as the 'Yage' by Nanyang Motors, while in mainland China, it is known as the 'Yage.' 2. Details: The eighth-generation model was launched in February 2008. It is available in Japanese, European, and American specifications, with engine displacements of 2.0L, 2.2L diesel (for the European market), 2.4L, and 3.5L. 3. Significance: In a way, the Accord embodies the concept of harmonizing various performance aspects of a car, such as power and fuel efficiency. This philosophy of 'harmony' has been passed down through each generation.
10
4
Share

Why is it called Dongfeng Infiniti?

The reason it is called Dongfeng Infiniti is that Infiniti is a Japanese luxury car brand, and its joint venture in China is named Dongfeng Infiniti. The models under its brand include: Infiniti QX50, Infiniti Q50L, Infiniti QX60, Infiniti QX80, Infiniti FX, etc. Taking the 2020 Infiniti QX50 2WD Elite Edition as an example, it is a mid-sized 5-door, 5-seat SUV with body dimensions of: length 4705mm, width 1903mm, height 1681mm, and a wheelbase of 2798mm. It is equipped with a 2.0T turbocharged engine and a CVT continuously variable transmission, delivering a maximum power of 180 kW and a maximum torque of 380 Nm.
7
3
Share

What to Do When an Automatic Car Won't Start Due to Dead Battery?

When an automatic car won't start due to a dead battery, the solution is: find another car that can start normally, position the two cars facing each other, open the hood and take out jumper cables, connect positive to positive and negative to negative terminals for charging. The reasons for an automatic car losing power are: 1. Dead battery; 2. Spark plug failure; 3. Fuel filter failure; 4. Circuit failure; 5. Mechanical failure; 6. Severe engine carbon buildup. Methods to prevent an automatic car from losing power include: 1. Avoid parking the car in open parking lots for extended periods; 2. Avoid multiple uninterrupted attempts to start the vehicle; 3. Regularly check battery components and connection lines; 4. Do not use car electronics after turning off the engine.
7
5
Share

What is the solution for the BMW X3 sunroof rattling noise?

BMW X3 sunroof rattling noise solution: 1. The sunroof rattling noise is actually caused by severe wear of these two screws (new ones will also wear out after some time). 2. Simply apply a protective layer of silicone and glue it in place to prevent further wear. 3. After gluing, reinstall it back. Below are some relevant information about sunroofs: 1. It can quickly cool down the car. If you park your car under the sun, the interior temperature can easily reach above 60°C in summer. Many drivers' first reaction is to turn on the air conditioning. In fact, you should first open the windows and sunroof, which can quickly draw out the hot air while driving to achieve the cooling effect. 2. It can eliminate fog. During seasons with large temperature differences, if the side windows are closed while driving, the front windshield can easily fog up. In this case, opening the sunroof for a few seconds can quickly remove the fog. 3. It can quickly refresh the air. Opening the sunroof while driving can rapidly increase the air circulation inside the car, thereby improving ventilation.
9
1
Share

What is the battery model for the Nissan Sylphy car key?

Sylphy key battery model is CR2025. CR2025 is a lithium manganese dioxide battery, named according to IEC standards. The naming convention is as follows: C - indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R - indicates the battery shape is cylindrical, with F used for square-shaped batteries; 20 - indicates the battery diameter is 20mm; 25 - indicates the battery height is 2.5mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity ranges from 140-170mAh. CR2025 typically has a lifespan of 5 years. If the manufacturer's production level is low or quality control is poor, the lifespan can be significantly shortened. Domestic first-tier brand batteries can generally guarantee this lifespan. Under ideal usage conditions (sealed, room temperature, no moisture interference, etc.), the lifespan can be extended further to 8 years or even 10 years. Generally, replacing a car key battery involves the following three steps: Step 1: Remove the mechanical key. Press the lock button on the side of the smart key to remove the mechanical key. Step 2: Open the battery cover. After removing the mechanical key, you will see a deep slot and a shallow slot at the top of the smart key. The deep slot is the keyhole, while the shallow slot is used to open the battery cover. Insert the mechanical key into the shallow slot and pry it outward to open the battery cover. Once opened, you will see the coin cell battery. Gently pry it out to remove the battery. Step 3: Replace the new battery. Install the new battery, then reattach the battery cover and mechanical key in sequence to complete the battery replacement.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.