How to Read a Car's Odometer?

1 Answers
LaJohn
07/25/25 1:34am
The method to read a car's odometer is as follows: 1. Open the driver's side door of the car and press the brake pedal to prepare for starting the engine; 2. Press the car's one-touch start button, and all the dashboard lights will illuminate, indicating that the engine has started; 3. Press the top of the lever located on the right side of the steering wheel, hold it down for more than 5 seconds without releasing, and the dashboard will display the mileage. The car odometer consists of a speedometer and a mileage counter. The speedometer indicates the car's speed in kilometers per hour, usually located directly in front of the driver's position.
Was this review help?
19
3
Share
More Forum Discussions

Where is the diagnostic port of Huansu H2 located?

The diagnostic port of Huansu H2 is located inside the interior trim panel under the steering wheel. Below are the detailed introductions: 1. Introduction: The BAIC Huansu H2 is the first MPV independently developed by BAIC Huansu. As a premium model crafted over two years by BAIC Huansu, the H2 highlights its 6AMT transmission and intelligent technology configurations as core selling points, setting a new benchmark for compact MPVs in the domestic market. 2. Market Positioning: As a stylish and intelligent compact MPV, the BAIC Huansu H2 targets the grassroots well-off population whose careers and families are in the ascendant phase. Additionally, this model holds significant appeal for young consumer groups.
20
2
Share

How often should the spark plugs of Honda Lingpai be replaced?

Honda Lingpai spark plugs should be replaced every two years or 40,000 to 60,000 kilometers. The Honda Lingpai is a compact 4-door, 5-seater sedan with body dimensions of 4756mm in length, 1804mm in width, and 1509mm in height, a wheelbase of 2730mm, and a fuel tank capacity of 40 liters. The Lingpai is equipped with a 1.5L engine and an eCVT continuously variable transmission, with a maximum power speed of 6000 rpm and a maximum torque speed of 5000 rpm. It features front-wheel drive, with a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension.
17
1
Share

Where is the fuel tank cap switch for the Reiz?

The fuel tank switch for the Reiz is located on the floor near the door on the driver's side. There are two switches under the driver's seat, and the smaller one towards the rear is the fuel tank switch. Below is some information about the Reiz: 1. Reiz body dimensions: length 4750mm, width 1795mm, height 1450mm, wheelbase 2850mm, front and rear track 1545mm, fuel tank capacity 70L. 2. Engine details: The Reiz has been discontinued, with the latest model being the 2013 version. The 2013 Reiz used two engines, one being a 2.5-liter naturally aspirated engine and the other a 3.0-liter naturally aspirated engine. The Reiz is a rear-wheel-drive mid-size sedan under Toyota, which gained popularity among many consumers after its launch.
18
3
Share

How to reset the tire pressure light on GAC Outlander?

The method to reset the tire pressure light on GAC Outlander is: 1. Inflate the tires to the normal pressure range; 2. Start the engine; 3. Use the control buttons on the left side of the steering wheel to operate the trip computer; 4. Find the tire option and click to enter; 5. Press and hold the trip computer control button on the left control panel. The GAC Outlander is a compact 5-door, 5-seat SUV with body dimensions of: length 4705mm, width 1810mm, height 1710mm, and a wheelbase of 2670mm. It is equipped with a 2.0L naturally aspirated engine and a CVT transmission, delivering a maximum power of 122 kW and a maximum torque of 201 Nm.
13
4
Share

What are the reasons for the high fuel consumption of the 2013 Teana?

The reasons for the high fuel consumption of the Teana are: 1. The vehicle has not been maintained on time: Failure to replace components such as the air filter, fuel filter, spark plugs, and clutch plates can lead to increased fuel consumption; 2. Control system malfunction: Carbon buildup and faults in the electronic control system, such as carbon deposits on the throttle valve, idle valve, and fuel injectors, as well as signal deviations from the oxygen sensor and coolant temperature sensor, are also factors that contribute to increased fuel consumption; 3. Driving habits: Driving habits can also increase the vehicle's fuel consumption, such as rapid acceleration, sudden braking, and mismatched speed and gear, which are also reasons for higher fuel consumption; 4. Insufficient tire pressure: Insufficient or low tire pressure increases friction between the tires and the ground, leading to greater resistance and higher fuel consumption. Severe tire wear can frequently cause slipping, which also increases fuel consumption.
5
3
Share

How to disable the recording function of a car's dash cam?

Click the microphone icon on the dash cam to turn off the recording function. Here is additional information: 1. Dash cam: A dash cam is a device that records images, sounds, and other relevant information during vehicle operation. After installation, it can record the entire driving process in video and audio, providing evidence for traffic accidents. For those who enjoy road trips, it can also document the journey through challenging terrains. While driving, it continuously records videos, along with time, speed, and location data, functioning much like a 'black box.' It can also be used at home as a DV camera to capture life's moments or serve as a home surveillance device. 2. Uses: It can also function as a parking monitor. It's important not to edit the video footage, as altered recordings may not be useful in the event of an accident. Additionally, it helps prevent unavoidable fraudulent claims that are common in today's society.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.