How to Re-pair the Tire Pressure Monitoring System?

1 Answers
McMadelyn
07/29/25 9:37am
Tire pressure monitoring re-pairing method is: Press and hold the setting button to enter the pairing interface. When you see a horizontal bar appear in the left front position, continuously deflate the left front tire. Once numbers appear on the display for the left front, briefly press the setting button to save and fix the numbers. Then press the toggle button (the double arrow button) once, and you will see a horizontal bar appear in the right front position. Repeat the same action as for the left front: deflate the right front tire, and once numbers appear, briefly press the setting button to save. Tire pressure refers to the air pressure inside the tire. The level of tire pressure plays a crucial role in the performance and power of the car.
Was this review help?
20
2
Share
More Forum Discussions

What is the actual measured ground clearance of the Envision?

The minimum ground clearance of the Envision is 188mm. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to indicate the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. Below is relevant information about the Envision: Powertrain: Available in 1.5T and 2.0T engine options, each with both two-wheel drive and four-wheel drive models. The 1.5T is paired with a 7-speed dual-clutch transmission, while the 2.0T is paired with a 6-speed automatic transmission. Features: Equipped with HID auto-sensing headlights, LED daytime running lights, an aluminum roof rack, 19-inch large aluminum alloy wheels, etc. The interior features a two-tone color scheme, with a marble-patterned dashboard trim. The cabin is illuminated by blue ambient lighting, and the Buick Envision also comes with a panoramic sunroof.
20
3
Share

Where is the car PVC valve located?

In the crankcase. Specific introduction is as follows: The main purpose of the PVC ball valve: Used to cut off or connect the medium in the pipeline, and can also be used for the regulation and control of fluid. The fluid resistance is small—the ball valve has the smallest fluid resistance among all valve types, and even the reduced-diameter ball valve has relatively low fluid resistance. Extended information: Precautions: Disassembly and decomposition of the multi-way valve should be carried out in a clean indoor environment, and the floor should be sprinkled with water before disassembly. During normal engine operation, a portion of the combustible mixture and exhaust gases will inevitably leak into the crankcase through the gap between the piston, piston rings, and cylinder wall. These gases are at high temperatures and carry fuel molecules and other impurities. Under high temperatures, the engine oil will gradually oxidize, deteriorate, and become diluted. The entry of these gases into the crankcase increases the internal pressure, leading to oil leakage faults in seals and gaskets. Therefore, it is essential to promptly discharge the gases that have leaked into the crankcase.
12
2
Share

What are the Mercedes-Benz A and B maintenance items?

Mercedes-Benz A maintenance items include: engine oil, oil filter, lubrication maintenance, windshield washer fluid top-up, full vehicle fluid inspection, computer diagnostics, drainage system check, tire tightening, tire pressure check (5 tires), chassis inspection (suspension, brake discs, pads, and all chassis components), interior inspection (horn, headlight washer, seat belts, interior lights, cigarette lighter, and all functions), battery test, maintenance light and tire pressure light reset. B maintenance items include: air filter replacement, cabin air filter replacement, air conditioning system sterilization, sunroof lubrication, intake tract, throttle body, and fuel injector cleaning without disassembly, in addition to all A maintenance items. Definition of car maintenance: Car maintenance refers to the regular preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Purpose of car maintenance: The purpose of car maintenance is to keep the vehicle clean and tidy, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
3
1
Share

What is the tutorial for activating the one-touch window lift function on the Great Wall M4?

Only the driver's window features one-touch lowering, while all other windows require continuous manual button pressing for both raising and lowering. Below is relevant information: 1. Great Wall M4: The Haval M4 boasts an eye-catching exterior design, which might be a primary reason it chose an attention-grabbing 'bungee jumping' approach for its product launch. Its striking appearance effectively maintains the visual appeal generated during the bungee event. Of course, the Haval M4 isn't just about looks - its practical features become apparent upon entering the vehicle. 2. Configuration: Regarding exterior features, standard front and rear fog lights along with frameless wipers stand out as highlights, reflecting Great Wall Motors' consistent approach to vehicle configuration - delivering remarkable value and thoughtful design. The primary function of fog lights is to enhance nighttime driving safety, an aspect many manufacturers overlook, demonstrating a lack of responsibility towards consumers.
4
5
Share

What are the car maintenance intervals and items?

Perform maintenance based on the vehicle's usage time and actual conditions. Maintenance intervals: 1-30,000 km: Generally only requires oil and oil filter replacement; 30,000-40,000 km: Typically requires coolant replacement and throttle body cleaning; 40,000-60,000 km: Requires spark plug replacement, brake fluid change, and brake pad replacement; 60,000-80,000 km: Throttle body cleaning, transmission fluid change, and tire replacement. Car maintenance items: Engine oil is divided into mineral oil and synthetic oil, with synthetic oil further classified into full synthetic and semi-synthetic. Full synthetic oil is the highest grade. When changing oil, refer to the vehicle owner's manual and follow the recommended specifications. Transmission fluid serves to lubricate and prolong the lifespan of transmission components, with types including automatic transmission fluid and manual transmission fluid. Manual transmission fluid is generally changed every 2 years or 60,000 km; automatic transmission fluid is typically changed every 60,000-120,000 km. Power steering fluid is a liquid in the car's power steering pump that makes steering easier through hydraulic action.
20
5
Share

What Causes the Golf 7 to Display a Brake System Malfunction?

Golf 7 cars indicate a brake system malfunction due to issues with the vehicle's brake pads. Another possible reason is a lack of brake fluid, which can severely impact the car's braking performance, causing the brakes to feel soft and increasing the stopping distance. In severe cases, air entering the brake lines can lead to brake failure. Below is some relevant information about the Golf 7: Body Dimensions: The Golf is a compact car under the Volkswagen brand, known as a relatively classic model. The dimensions of the new Golf are 4259 mm in length, 1799 mm in width, 1476 mm in height, with a wheelbase of 2637 mm. Powertrain: The 7th generation Golf is equipped with a 1.6L engine as the entry-level model. The 1.4TSI engine combines gasoline direct injection and turbocharging technology, delivering a maximum power of 96kW and a peak torque of 220Nm, paired with a 7-speed DSG dual-clutch transmission.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.