How to Re-pair an External Tire Pressure Monitoring System?

1 Answers
DiLyla
07/29/25 1:22pm
To re-pair an external tire pressure monitoring system, you can use professional equipment available at a 4S store. Press and hold the learning mode button in the middle of the display. When the icon starts flashing, you can proceed with the pairing operation. The flashing will stop once the pairing is completed. There are three common types of tire pressure monitoring systems: built-in, external, and OBD. Both underinflation and overinflation can affect driving performance. Underinflation can shorten tire lifespan and increase fuel consumption, while overinflation can compromise driving stability and comfort. Uneven tire pressure can also affect vehicle handling and accelerate wear on the suspension system.
Was this review help?
9
2
Share
More Forum Discussions

How to Repair Scratches on Hard Plastic Car Dashboard?

Here are the methods to repair scratches on hard plastic car dashboards: 1. For general scratches, use matte plastic spray paint for repair: If there are minor scratches or whitening, first sand the scratched area with 2000-grit sandpaper, then clean it thoroughly with alcohol. Apply matte plastic spray paint locally, but note that this may cause color differences. If possible, it's best to remove the entire component and spray paint it entirely. 2. Method for repairing leather dashboard scratches: Visit a professional leather repair shop where they can mix paint on-site to match the leather color. After this repair method, the scratches are barely noticeable upon close inspection, and the price is affordable, usually costing around a hundred yuan.
4
3
Share

How to adjust the headlight height of Audi Q5?

Audi Q5 headlight height adjustment method is as follows: Detect the dynamic balance condition of the vehicle, and automatically adjust the headlight height through a pre-set program. Below is a related introduction of Audi Q5: 1. Power aspect: The Audi Q5 is equipped with a redesigned 2.0TFSI engine. This four-cylinder engine combines three top technologies - turbocharging, gasoline direct injection, and AVS variable valve lift system. At just 1500 rpm, this engine can achieve a peak torque of 350 N·m, which lasts until 4200 rpm, with a maximum power of 155 kW (211 horsepower). 2. Interior aspect: The domestic Q5 has a reasonable and simple interior layout, rich and practical configurations, and a strong sense of technology; the cabin workmanship is delicate and the materials used are of good quality.
7
0
Share

What is the reason for the lack of power when a scooter goes uphill?

If the engine runs basically normally without load, but accelerates slowly under load, the car lacks power when going uphill, and still feels insufficient power when the accelerator pedal is pressed to the bottom, the speed cannot be increased, and the maximum speed cannot be reached. The main causes of the failure are: (1) The air filter is blocked. (2) The throttle is improperly adjusted and cannot be fully opened. (3) The fuel pressure is too low. (4) The fuel injector is blocked or atomized poorly. (5) The water temperature sensor is faulty. (6) The air flow meter is faulty. (7) The ignition timing is improper or the high-voltage spark is too weak. (8) The engine compression pressure is too low.
20
4
Share

Has the Patrol been discontinued?

The Patrol has been discontinued. Here are the specific details about the Patrol: Exterior: The new car is equipped with a brand-new Nismo exterior kit, featuring a more dynamic front bumper design, and the incorporation of Nismo's signature red elements gives it a more passionate feel. Powertrain: The vehicle is powered by a Nismo-tuned 5.6L V8 engine, with a maximum output of 434 horsepower, an increase of 36 horsepower compared to the standard version. The peak torque data has not been released yet. Additionally, the car's steering and suspension systems have been tuned by Nismo and are fitted with Bilstein shock absorbers.
14
0
Share

How many times does a 2007 car need to be inspected in a year?

1. Annual Inspection Frequency: Vehicles aged 6-15 years require two inspections per year. Below is relevant information: 1. Inspection Process: Annual vehicle inspection must be conducted twice, both requiring on-site testing. On-site vehicle inspection must be processed at the vehicle management office or an authorized vehicle inspection agency. During the inspection, the vehicle must be physically present, and the following documents are required: vehicle registration certificate and compulsory traffic insurance policy. 2. Preparations: All outstanding traffic violations and unresolved traffic accidents involving the vehicle must be settled before the inspection can proceed. Vehicle inspection procedures can be completed in advance but cannot be delayed. The latest acceptable time for completing the inspection is within the registration month of the vehicle.
19
2
Share

What is the method for initializing the sunroof 431 setting on the Tiguan?

Here is the method for initializing the sunroof 431 setting on the Tiguan: Press the vehicle's one-touch start button to start the engine and power on the vehicle, otherwise the sunroof cannot be set. Then, rotate the sunroof knob clockwise to the maximum position and hold it for five seconds until a beep sound is heard before releasing. Press the sunroof's downward button until the sunroof fully opens. At this point, the basic sunroof setting is complete. Here is additional information: The Volkswagen Tiguan is a vehicle produced by SAIC Volkswagen. In terms of body dimensions, the 2017 Tiguan 300TSI Automatic Two-Wheel Drive Silk Road Comfort Edition measures 4506mm x 1809mm x 1685mm in length, width, and height, with a wheelbase of 2684mm.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.