How to Raise the Window When the Window Regulator is Damaged?

1 Answers
LaAdeline
07/29/25 12:02pm
If the window regulator is damaged, you can spray some dashboard wax on the window seal or apply talcum powder (to act as a lubricant) to raise the window. Below are methods to restore malfunctioning window regulators: 1. Method One: If all window regulators are not working, the possible causes of this issue could be a detached ground wire from the combination switch, a detached main power wire, poor relay contact, damaged relay, or poor contact in the lock switch or the switch not being closed. The repair method involves inspecting and repairing the circuit, and addressing any jamming in the window regulator. The causes affecting such a malfunction may include deformed or damaged window channels or loose screws in the regulator. 2. Method Two: Misaligned guide rail installation or a damaged window regulator. The key repair methods involve cleaning or replacing the window channels or loosening the window installation screws to adjust the window position.
Was this review help?
18
4
Share
More Forum Discussions

How to Remove Faded Red Ribbon Stains from Car Paint?

To remove faded red ribbon stains from car paint, follow these methods: 1. Use a dedicated car cleaner spray: You will need a professional car cleaner, which can be purchased online or at an automotive store. Spray the cleaner directly onto the stained area and then wipe it off. 2. Polishing: If the stain covers a large area or has been there for a long time, you may need to go to a 4S shop or car wash for polishing. Using a polishing machine will yield better results, but it may cause some damage to the paint as polishing reduces the thickness of the paint. Regular maintenance is also essential to protect the car paint. Methods such as waxing or applying a protective film can help preserve the paint.
17
3
Share

How Long Can You Take the Driver's License Test?

You can take the driver's license test for up to 3 years. After exceeding this period, you will need to pay and register again. Here are some relevant details about the driver's license test: 1. Retake Regulations: Each subject can be taken once, with one retake opportunity. If a candidate fails the retake, they must wait for a certain period before reapplying for the same subject. 2. Scheduling Rules for Subject Two and Three: The test dates for Subject Two and Subject Three should be scheduled within 20 days after passing the previous subject. 3. Validity Period for Each Subject's Score: Within the validity period of the driving skills test permit (generally 3 years), the scores of subjects that have already been passed remain valid.
8
0
Share

What to Do If You Keep Crossing the Line in Subject Two Driving Test?

Here are the solutions for frequently crossing the line in Subject Two driving test: 1. Maintain correct sitting posture: Incorrect posture may lead to misjudging reference points. Since everyone has different height and body shape, adjust the seat and rearview mirror positions according to personal conditions. 2. Control the speed properly: Driving too fast and missing the timing for steering is the main reason for crossing the line. In Subject Two test, you must slow down and keep the speed steady. This way, even if you steer too early, you can still correct it. 3. Steer decisively: Sometimes the reference point is correctly identified, but unresponsive hands during steering may also cause crossing the line. When it's time to steer, do it quickly and decisively—"steer early rather than late."
5
3
Share

Why Does the Car Door Lock Make Noise?

The noise from a car door lock can be analyzed from the following aspects: 1. Noise caused by the door seal: Over time, the door seal itself gradually ages, creating friction between the door seal and the car body, which may produce noise while driving. 2. Noise from the door itself: This issue occurs when the door lock striker is installed too outward, causing the door to not fit tightly with the car body. 3. Noise from the door hinge: After prolonged use, the hinge's friction increases significantly, leading to noise. 4. Noise from the door limiter: If the door limiter is not regularly maintained, it can also cause the door to produce noise. 5. Noise from friction in the door glass seal: Over time, the glass seal may become misaligned, which can also generate noise while driving.
2
5
Share

What are the causes of excessively high engine coolant temperature?

Causes of excessively high coolant temperature are as follows: 1. Insufficient engine coolant; 2. Faulty water temperature sensor or gauge; 3. Overly lean or rich air-fuel mixture; 4. Excessive carbon buildup in the combustion chamber. Additional information: 1. Function of coolant: It circulates within the engine radiator to protect normal engine operation, providing effects such as antifreeze, anti-boil, anti-rust, and anti-corrosion. Proper use of coolant can prevent corrosion, cavitation leakage, radiator boiling, scale formation, and freezing, ensuring the cooling system remains in optimal working condition and maintaining the engine's normal operating temperature. 2. Characteristics of coolant: Coolant features include high boiling point, low foaming tendency, excellent viscosity-temperature performance, as well as anti-corrosion and anti-scaling properties.
18
0
Share

How to reset the maintenance reminder wrench on the older C30 model?

The method to reset the maintenance reminder wrench on the older C30 model is to press and hold the reset button A while stepping on the brake pedal. Turn the ignition switch to the 'on' position without starting the engine. Release the reset button A and then release the brake pedal. Turn the ignition switch back to the 'off' position to complete the reset. Below is some information about Great Wall Motors: 1. Introduction: Great Wall Motor Company Limited is a collectively-owned automobile manufacturing enterprise. 2. History: Established in 1984 and headquartered in Baoding, Hebei Province, it went public in Hong Kong in 2003 and on the Chinese mainland in 2011. 3. Products: The company owns four brands including Haval, WEY, and ORA, with products covering three major categories: SUVs, sedans, and pickup trucks. It possesses independent supporting capabilities for core components such as engines and transmissions.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.