How to Quickly Start an Automatic Transmission Car?

3 Answers
VonParker
07/29/25 6:20pm
Automatic transmission quick start method: 1. Insert the key after getting in the car, turn it to the second power-on position for ignition, and wait for the system self-check to complete; 2. Shift the gear lever from P to N; 3. Release the brake and start the car's engine; 4. Press the brake pedal with your foot, shift the gear lever from N to D, release the brake and press the accelerator to start. Introduction to automatic transmission gears: 1. P is the parking gear, used for long-term parking; 2. R is the reverse gear, engaged when the vehicle needs to move backward; 3. N is the neutral gear, used when the vehicle is parked for a short time without turning off the engine; 4. D is the drive gear, when the gear lever is in D, the vehicle will automatically shift gears based on throttle opening and speed data; 5. S is the sport mode, making the vehicle drive more sporty; 6. M is the manual mode, when the gear lever is in M, shifting is done manually by the driver; 7. L is the low gear.
Was this review help?
7
1
Share
McMason
08/14/25 11:02am
As a seasoned driver with over 20 years of experience driving automatic transmission vehicles, the key to quick starts lies in coordinating the throttle and brake. Keep the brake pedal firmly pressed while gently applying the throttle with your right foot, allowing the engine to rev up to around 3000 RPM before suddenly releasing the brake. This technique, known as a launch start, will propel the car forward instantly. However, don't overuse this trick as it puts immense stress on the transmission, accelerating wear and tear. Additionally, tire grip plays a significant role—dry pavement yields the best results, while wet conditions increase the risk of skidding, so avoid attempting it in the rain. In my younger days, I too was fascinated by the thrill of speed, but now I prioritize safety. I recommend practicing in open areas before trying it on the road to prevent damage to the car or harm to others. Regular transmission fluid checks are also crucial for maintaining your vehicle's health. Remember, safe driving is the golden rule—don't show off and risk getting into trouble.
Was this review help?
9
1
Share
Expand All
IsabelMarie
10/14/25 5:34am
I'm a passionate driving enthusiast, and the quick start of an automatic transmission is so thrilling! Usually, I shift into sport mode, like S gear or manual mode, firmly press the brake with my right foot, while lightly tapping the throttle with my left foot to reach the mid-RPM range, then quickly release the brake pedal—the car immediately zooms off. It works best when practicing on private tracks or parking lots, with the roaring sound being super exhilarating. But don't mess around on the streets; urban traffic is heavy, and rapid starts can easily lead to loss of control and accidents, as well as damage the engine and tires. I recommend trying this only in professional settings, like track days or racing circuits, where it's safer. For maintenance, check tire pressure and brake pad wear after each drive to avoid long-term abuse. Keep the fun moderate and don't forget safety in pursuit of speed.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

Which factory produces Yadu tires?

Yadu is produced by Zhongce Rubber Group Co., Ltd. Zhongce Rubber Group is a well-known tire manufacturer in China. Here is some relevant information: 1. Introduction: Zhongce Rubber Group was established in 1958 and is currently one of China's relatively large tire manufacturers. It owns multiple tire brands, including Chaoyang tires, Goodride tires, Westlake tires, Arisun tires, and Yadu tires. Currently, among domestic tires, Zhongce's tire quality is relatively good. 2. Performance: SSBR can meet automotive performance requirements, with tire wet grip and rolling resistance performance reaching EU standards of Class B and Class C. Therefore, Zhongce's tires are not inferior to imported tires in the same price range.
9
2
Share

What does it mean when the dashboard STOP light is on?

The dashboard STOP light is a mandatory parking warning light. Below is an introduction to related indicator lights: 1. Battery indicator light: Displays the working status of the battery. It lights up when the ignition is turned on and turns off after the engine starts. If it does not light up or remains lit continuously, the generator and circuit should be checked immediately. 2. Fuel indicator light: Indicates insufficient fuel. When this light comes on, it means the fuel is nearly depleted. Generally, the vehicle can still travel about 50 kilometers from the time the light comes on until the fuel is completely exhausted. 3. Washer fluid indicator light: Shows the level of the windshield washer fluid. If the washer fluid is nearly depleted, this light will illuminate, reminding the owner to add washer fluid promptly. The indicator light will turn off after adding cleaning fluid.
20
3
Share

What level of car typically has a 300 mph speedometer?

Basically, any performance car or sports car will have a speedometer that goes up to 300 mph or more. Below is some relevant information about car dashboards: 1. Introduction to car dashboards: With advancements in electronic technology and the emergence of new sensors and electronic display components, electronic dashboards have been rapidly adopted in vehicles. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights. 2. Function of car dashboards: The car dashboard displays the working conditions of various vehicle systems, allowing real-time monitoring of the car's status and providing drivers with necessary operational parameters. It serves as a crucial interface for communication between the driver and the vehicle.
14
3
Share

What is the reason why the dashboard door light is always on?

When the dashboard door light is always on, it indicates that the door is not properly closed. The door has two locks; if you close it gently, only the first lock is engaged. If you don't close it firmly, the indicator light will remain on. Here is some relevant information about car doors: 1. Design requirements: Ensure ease of entry and exit for passengers, with the maximum opening angle controlled at around 65° to 70°. During the opening process, the door should not interfere with other parts. When closed, the door must be securely locked to prevent it from opening while driving. 2. Definition: The car door provides access for the driver and passengers, isolates external interference, reduces side impacts to some extent, and protects the occupants. The aesthetics of the car are also related to the design of the door.
1
1
Share

What does a triangle with an exclamation mark in a car mean?

A triangle with an exclamation mark inside indicates a malfunction in the car's regular performance, components, or functions. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault indicator in cars. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark indicators: a yellow gear with an exclamation mark inside, a red circle with parentheses and an exclamation mark in the middle, a yellow horizontal line with parentheses and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four situations: Automatic transmission fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission malfunction or transmission lubricant below the normal range. The transmission oil should be replaced promptly. Braking system fault: A circle with parentheses and an exclamation mark in the middle represents a braking system warning, mainly indicating a braking system malfunction or low brake fluid level. The braking system should be inspected immediately to avoid accidents. Tire pressure anomaly: A horizontal line with parentheses and an exclamation mark in the middle represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, indicating a malfunction in one of the car's lights. Solution: Visit a 4S shop as soon as possible for inspection and repair, or check yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.
13
5
Share

What to Do If You Have a Driver's License but Don't Drive?

New drivers often feel nervous about driving after obtaining their license. There is no perfect solution to this situation except consistent practice. Precautions for new drivers: 1. Try to have an experienced driver accompany you; avoid driving alone. 2. Familiarize yourself with the functions of all buttons in the car, especially the horn, lights, and gearshift. 3. Choose familiar routes when driving. 4. Adjust your seat to a comfortable position and avoid frequently switching cars. 5. Maintain a calm mindset while driving; stay composed in unexpected situations. 6. Practice in empty areas whenever possible—practice makes perfect. 7. Follow traffic rules, drive cautiously, and prioritize safety.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.