How to Quickly Solve a Car That Won't Start?

Light Truck 24V or 12V?

Light trucks are 12V. Heavy-duty trucks are all 24V. Regardless of the vehicle type, all bulbs in the vehicle operate at a unified voltage. Check how many batteries the vehicle has: one battery means it's 12V, while two batteries indicate 24V. Below is relevant information about light trucks: 1. Introduction: Light trucks refer to N2 category vehicles in the N-class commercial vehicle classification with a maximum design total mass not exceeding 4.5 tons. After over thirty years of development, China's light truck industry has evolved from introducing foreign advanced light truck technologies and production lines at the low-end stage to independently researching and producing high-end domestic light truck products. With continuous rapid growth in recent years, the high-end light truck market is now showing a trend of vigorous development. 2. Industry Competition: The entry threshold for the light truck industry was relatively low in its early stages, with production enterprises once numbering in the hundreds. Over the years, the technological content of light truck products has continuously improved, raising both the entry threshold and market concentration. In the past three years, the market share of the top three enterprises in the industry has exceeded 60%. From the perspective of the light truck market structure, the market share of mid-to-high-end light truck products remains relatively low.

15

2

Share

What Causes the Squeaking Sound When Starting a Car?

The reason for the squeaking sound when starting a car is: excessive wear of the flywheel teeth, which requires replacement of both the flywheel teeth and the starter motor gear. The steps for starting an automatic transmission car are: 1. Turn the ignition key to the power position; 2. Press the foot brake and shift the gear from P to N; 3. Release the foot brake and start the engine; 4. Allow the engine to warm up while stationary; 5. Press the foot brake, shift the gear from N to D, and release the handbrake; 6. Gradually release the foot brake and smoothly press the accelerator to start moving. The steps for starting a manual transmission car are: 1. Fully depress the clutch pedal; 2. Move the gear lever to engage first gear; 3. Gently push down the turn signal lever to activate the left turn signal, alerting vehicles in front and behind; 4. Press the horn button to alert pedestrians in front of the vehicle that you are about to start; 5. Release the vehicle's handbrake; 6. Slowly lift the left foot until the clutch reaches the half-engaged position, causing the vehicle to vibrate slightly; 7. As the vehicle begins to move, release the clutch and gently press the accelerator.

2

1

Share

Why does the tire pressure warning light stay on?

The first subject exam can be taken twice on the same day. If you fail the first attempt, you can take a free second attempt. If you still fail the second attempt, the exam for this subject will be terminated, and you can only schedule another exam after ten days. Below is a relevant introduction to the first subject exam: 1. Exam content: The first subject refers to the theoretical driver's test, conducted at the vehicle management office, which all license applicants must pass. The exam content includes the most basic knowledge such as driving theory fundamentals, road safety laws and regulations, traffic signals, traffic rules, plus local regulations. The scheduling of the theoretical driver's test is arranged by the local vehicle management office. 2. Exam sequence: The first subject is part of the teaching and examination outline for motor vehicle driver training. The examination part of this outline is divided into three subjects, organized by the traffic management department of the public security authority. The exams are conducted in the order of the first subject, the second subject, and the third subject. After passing the previous subject exam, you can proceed to the next subject exam; if you fail the previous subject exam, you must continue with the same subject exam.

3

4

Share

How Many Kilometers for the Second Maintenance?

Generally, the second maintenance for a car is performed when the vehicle has been driven for 10,000 kilometers or between 9 months to a year, which means it is spaced 5,000 kilometers or 3 months to half a year after the first maintenance. However, some models have their first maintenance at 8,000 kilometers or 10,000 kilometers, in which case the second maintenance will be correspondingly delayed. Relevant details about the second maintenance are as follows: 1. Items for the second maintenance: It includes inspection and maintenance of 63 items across eight major systems—engine, transmission, braking system, steering system, air conditioning system, body system, tire system, and suspension system—along with quality inspection and test driving. The key tasks, similar to the first maintenance, involve changing the engine oil and oil filter. 2. Replacements needed during the second maintenance: The air filter and cabin air filter also need to be replaced during the second maintenance. These parts can be replaced at the 4S shop, or you can purchase matching parts online and replace them yourself, which can save some costs.

2

5

Share

How many kilometers can an Audi A3 drive after the oil level reminder appears?

Audi A3's first oil level check reminder indicates that you can still drive approximately 200 kilometers. Oil refill standards: When adding engine oil, it's best to fill between the upper and lower marks on the dipstick, not below the middle mark. This is because high-speed driving can cause engine heat to thin the oil, and insufficient oil volume would reduce lubrication and cooling effects. Practice has shown that filling oil to 1/4 below the upper limit is most ideal. Additionally, factors such as oil type, season, climate, engine displacement, and technical performance must be considered. Therefore, it's best to choose a professional automotive service center where experts can carefully evaluate your vehicle, select the appropriate oil, and perform meticulous maintenance to prevent potential issues. Hazards of overfilling oil: Excessive oil increases the crankshaft's rotational resistance, reduces engine output power, and can cause the excess oil to enter the combustion chamber, leading to oil burning, blue smoke emissions, and increased fuel consumption. The residue from burned oil (primarily carbon, which is very hard) accumulates on the combustion chamber walls, reducing space and lowering the engine's compression ratio. It also accelerates wear on cylinders and pistons, thereby shortening the vehicle's lifespan.

7

2

Share

What to Do If a Car Hasn't Been Driven for Several Months?

If a car hasn't been driven for several months, you need to disconnect the power supply in advance and remove the negative terminal. Park it in a garage if available; if not, find a safe, dry, and shaded location to park and cover it with a car cover. Clear all items from the car, especially avoiding leaving snacks inside. Ensure the tires maintain sufficient pressure, meaning they should be fully inflated. When you need to drive the car again, follow these steps: 1. Check if the tires are deformed: If the car remains stationary for a long time, the entire weight of the car is supported by the four tire contact points with the ground, which may cause pressure on these areas. If any abnormalities are found, replace the tires promptly. 2. Check the tire pressure: Normally, tire pressure may decrease slightly, so it's necessary to inflate them appropriately. If the pressure is already at the standard level, no action is needed. 3. Warm up the car sufficiently: Due to prolonged parking, the engine oil will settle at the bottom of the oil pan, leaving various car components without lubrication. To allow the oil enough time to lubricate all engine parts and reduce wear, the warm-up time should be slightly longer than usual. Additionally, avoid aggressive driving immediately after starting the car, as some components only receive lubrication once the car is in motion. After completing the stationary warm-up, drive slowly until the engine coolant temperature reaches normal levels before driving as usual.

2

5

Share

How to Quickly Solve a Car That Won't Start?

Light Truck 24V or 12V?

What Causes the Squeaking Sound When Starting a Car?

Why does the tire pressure warning light stay on?

How Many Kilometers for the Second Maintenance?

How many kilometers can an Audi A3 drive after the oil level reminder appears?

What to Do If a Car Hasn't Been Driven for Several Months?

What does Audi 60TFSI mean?

Why does the left headlight of the Mercedes GLC stay on after parking?

What is the Principle of Car Rearview Mirrors?

How to Operate the Gear Shift in a Truck?