How to Quickly Schedule the Subject 4 Exam?

Which has more horsepower, 1.2t or 1.5l?

1.2t has more horsepower. Here are the relevant details: 1. Reason: A 1.2t engine can provide around 100 horsepower, equivalent to the horsepower output of a 1.6-1.8L displacement engine. Additionally, the 1.2T is a turbocharged, direct-injection engine, while the 1.5L is a naturally aspirated engine. Turbocharging is an advanced technology that offers better fuel efficiency, environmental friendliness, and stronger power compared to naturally aspirated engines. 2. Conversion: Maximum power is usually expressed in metric horsepower (PS) or kilowatts (kW), with 1PS equal to 0.735kW.

2

4

Share

How to Obtain a Driving Instructor Certificate?

According to national regulations, the 'Administrative Rules for Motor Vehicle Driver Training' stipulate that there are two opportunities per year to take the qualification examination for motor vehicle driver trainers, once in March and once in September each year. The application process is as follows: 1. Online registration: You can first submit your personal information online, enter the province and road transport management information, then submit it to the local driver instructor examination office, and print the submitted materials. 2. Document review: Bring the printed materials to the local instructor qualification examination office for review. Only after passing the review can you proceed with the registration, and only after registration can you proceed with the subsequent steps. 3. Registration requirements: The driver must hold a C1 driver's license for more than five years. The fastest age to become an instructor is 23, but it cannot exceed 60 years old. 4. Validity period: The validity period of the motor vehicle driver training instructor certificate is the same as that of an ordinary driver's license, which is six years. It is also necessary to renew the certificate before it expires.

8

4

Share

Why is hydroplaning prone to occur while driving in rainy weather?

When driving on wet roads, the adhesion of the wheels decreases sharply as the speed increases, and a "water film" can easily form between the tires and the road surface, leading to hydroplaning. Remember the sections of the road where hydroplaning is likely to occur and drive slowly. On rainy days, drivers need to be especially careful when driving on highways. Certain sections of the highway, such as near the lowest points of downhill slopes, are the most prone to water accumulation, and it is necessary to reduce speed. If the speed is too high, hydroplaning can easily occur. To prevent this phenomenon, it is necessary to reasonably control the throttle and speed when starting. Accelerate gently to prevent excessive power conversion from low gears, which can overcome the tire friction coefficient and cause skidding. It is recommended to keep the speed below 60 km/h, and on urban roads, it should be appropriately controlled below 40 km/h. When turning, reduce speed in advance before entering the curve, and accelerate gently after exiting the curve. If hydroplaning occurs, drivers should not panic, especially avoiding extreme actions such as emergency braking, as this can easily lead to rollovers and serious consequences. The best course of action is to control the direction to maintain straight-line driving, slow down gradually, and pull over to stop.

14

5

Share

How to Solve Fogging on the Outside of Car Windows in Summer Rain?

When car windows fog up during summer rain, if the fogging is slight, wiping with a towel will suffice; if the fogging reappears after wiping, you can adjust the temperature difference between the inside and outside using the air conditioning and wait for the fog to disappear. Turning on the air conditioning can quickly remove the fog inside the car. After turning on the air conditioning, use the recirculation mode and direct the air vents toward the windows. The fog inside the car will clear up immediately, with very fast results. However, there is a drawback: the temperature inside the car will also drop, which can be uncomfortable in winter. Additionally, using the warm air from the air conditioning can also clear fog on the windows. Adjust the switch to the warm air position and set the fan speed as high as possible, also directing the air vents toward the windows. This will raise the temperature inside the car, dry the air, and prevent fog from forming on the windows. However, this method is not suitable right after starting the car; you need to wait for the engine to warm up for it to be effective.

9

5

Share

What are the requirements for motorcycle license photos?

To apply for a motorcycle driver's license, a white-background photo measuring 32mm×22mm is required. The specific requirements for the driver's license photo are as follows: 1. Time: The photo must be taken within 6 months before the applicant applies for the driver's license. 2. Attire: The photo must be a straight-edged, front-facing, color, bareheaded, single-person half-length ID photo without a hat, scarf, uniform, or tinted glasses; long-haired individuals should expose both ears, and the head and face should not have any tilt, side turn, heavy makeup, or accessories that affect facial feature recognition. 3. Background: The background color should be white, with a clear, well-layered, and natural-looking portrait without obvious distortion. 4. Size: The photo size should be 32mm×22mm, with a head width of 14mm～16mm and a head length of 19mm～22mm.

2

0

Share

What to do if the review of Subject 3 training hours is delayed?

Subject 3 review usually goes through machine review first, followed by manual final review. If the Subject 3 training hours show as "pending review" or "failed," it may be due to one of the following three reasons: 1. Concurrent training: For example, cross-training between Subject 1 theoretical learning and Subject 2 practical training, or overlapping theoretical learning between Subject 1 and Subject 4. Training hours may be invalidated if different subjects are trained on the same day. 2. Photo mismatch: Due to differences in shooting angle, posture, or makeup level, the photo may deviate significantly from the registration photo, leading the system to flag it as a mismatch and invalidate the training hours. 3. Review time not yet reached: If Subject 3 training hours show as "pending review," it may simply be because the review process takes 3-7 working days, even after completing the required hours (24 hours for Subject 3, with no more than 4 hours per day).

17

1

Share

How to Quickly Schedule the Subject 4 Exam?

Which has more horsepower, 1.2t or 1.5l?

How to Obtain a Driving Instructor Certificate?

Why is hydroplaning prone to occur while driving in rainy weather?

How to Solve Fogging on the Outside of Car Windows in Summer Rain?

What are the requirements for motorcycle license photos?

What to do if the review of Subject 3 training hours is delayed?

Where is the largest used car trading market in Harbin?

What to Do When the External Lighting Fault Warning Light Comes On?

What Are the Reasons for a Car Horn Not Working?

Can you make a U-turn at a roundabout sign?