How to Quickly Move a Parked Car?

3 Answers
SanGia
07/24/25 4:27am
Carefully inspect around the other vehicle, especially the driver's side window and the front windshield. If there is a phone number, contact the owner directly. If no phone number is available, you can seek assistance from parking lot staff or call 114. Additionally, the one-click car moving services on Alipay and WeChat can also be utilized.
Was this review help?
17
5
Share
IsabelLynn
08/11/25 12:04am
I've been driving for several years and often need to move my car quickly in traffic jams or when parking urgently. The best approach is to prepare in advance: before starting the car, take a quick look around to check for pedestrians or obstacles, and use the rearview and side mirrors when reversing—don't panic. The key is to be swift but steady. For example, when exiting a parking spot, first confirm there are no nearby cars before slowly backing out; if stuck in traffic, avoid hastily changing lanes—instead, look for a gap and gently accelerate into it. Safety comes first: I always fasten my seatbelt and check that the lights and brakes are responsive—especially on slippery rainy nights. Practicing short-distance maneuvers in empty lots helps familiarize yourself with the car’s reactions, making acceleration smoother over time. I avoid using my phone while moving the car to stay focused—distractions slow things down. In the long run, these habits have saved me a lot of time during rush hours.
Was this review help?
15
4
Share
Expand All
Wood
08/11/25 12:06am
When I first started learning to drive, I was even slow at maneuvering the car. Later, I learned that the trick to quick car maneuvering is to simplify the steps. First, sit in the car, take a deep breath to calm down, and don’t rush to move after turning the key to start the engine—take a quick look around to ensure safety. When reversing out of a parking spot, don’t stomp on the gas; gently accelerate and back out slowly. If you’re blocking someone’s way, check the windshield for a parking contact card to quickly reach out to the owner for cooperation. Simple actions like rolling down the window to listen for sounds can help judge distances. During the beginner phase, having a friend guide you from the side boosts confidence. I always keep the car clean with a clutter-free windshield—clear visibility makes operations smoother. Practice more on small roads to get the hang of it, and speed will come naturally—but remember not to exceed the limit, as safety is more important than speed.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

When Do Vehicle Inspection Stations Close for Holidays?

Vehicle inspection stations are closed on Saturdays, Sundays, and statutory holidays. The working hours of vehicle inspection stations are generally from 9:00 AM to 5:00 PM, with a break in between. The working days are from Monday to Friday, and some stations may have staff on duty on Saturdays. Therefore, it is recommended to consult the local authorities for specific working hours. Relevant information is as follows: 1. Legal basis: Article 7 of the "State Council Regulations on Working Hours for Employees" stipulates that state organs and institutions implement a unified working time system, with Saturdays and Sundays as weekly rest days. 2. Enterprises can flexibly arrange weekend rest days according to actual conditions. Employees work 8 hours per day and 40 hours per week.
15
5
Share

Can 6-year-old tires still be used?

Six-year-old tires cannot be used. Tires that are over 6 years old experience degradation or aging due to physical and chemical factors, which weakens their functionality. Tires stored unused for long periods are more prone to hardening and becoming brittle compared to those used normally on vehicles. The following conditions also render tires unusable: 1. Visible signs of wear or damage in three to four areas around the tire. 2. Exposed steel wires or fabric within the tire rubber. 3. Cracks, cuts, or deep grooves on the tread or sidewall that expose steel wires or fabric. 4. Bulges, protrusions, or splits in the tire. 5. Punctures, cuts, or other damage that cannot be repaired due to their size or location.
2
3
Share

Should You Brake When Making a U-Turn in Subject Three?

You can brake when making a U-turn. The method for making a U-turn is as follows: 1. Slow down first, then shift gears. Before making a U-turn, the car usually travels relatively fast, around 30-40 km/h. So after completing the light operation, first apply the brake to reduce the speed, then press the clutch and downshift. 2. Check the rearview mirror to ensure there are no surrounding hazards. To ensure a smooth U-turn, always check the rearview mirror to confirm it's safe behind before proceeding. Then look forward; if there are vehicles going straight, let them pass first. 3. Be careful not to steer left too early. Although making a U-turn requires turning the steering wheel fully to the left, remember not to steer left prematurely. The earlier you turn the wheel, the harder it becomes to complete the U-turn. So keep the vehicle moving straight, and only quickly turn the steering wheel to the left when preparing to make the U-turn.
1
4
Share

How to Power On with One-Button Start?

There are three power-on modes for one-button start, as detailed below: 1. Without pressing the brake, press the button once to power on some electronic devices, such as the audio system, electric folding or adjustment of the rearview mirror. 2. Without pressing the brake, press the button twice in succession to power on the entire vehicle and initiate a self-check, enabling all electronic devices. 3. Press the brake and press the button once to start the engine with one-button start. Relevant details are as follows: The usage method of one-button start is as follows: 1. Press the start button once. 2. After the ACC light turns on, press the start button again; at this point, the one-button start button turns green, indicating that the vehicle's power is fully connected. 3. After the vehicle completes its self-check, press the brake or clutch (brake for automatic transmission, clutch for manual transmission). 4. Press the one-button start key to start the vehicle.
1
0
Share

Is an Appointment Required for Subject 4?

Subject 4 does not require an appointment. Subject 4, also known as the Subject 3 Safety and Civilized Driving Knowledge Test, must be taken on the same day after passing the Subject 3 Road Driving Skills Test. In some regions, applicants can simultaneously schedule appointments for both Subject 2 and Subject 3 Road Driving Skills Tests. If the appointments are successfully made, the tests can be taken consecutively. After passing both Subject 2 and Subject 3 Road Driving Skills Tests, applicants can take the Subject 3 Safety and Civilized Driving Knowledge Test on the same day. Additional Information: 1. The "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" stipulates: Article 38: Applicants learning to drive on training grounds and roads must obtain a Learning to Drive Certificate as required. The Learning to Drive Certificate is valid for three years, and applicants must complete Subject 2 and Subject 3 tests within this period. Those who fail to complete the tests within the validity period will have their previously passed subject scores invalidated. The Learning to Drive Certificate can be in paper or electronic form, both of which hold equal validity. Applicants can print or download the Learning to Drive Certificate via the Internet-based Comprehensive Traffic Safety Service Management Platform. 2. Article 44: Each subject test allows one retake for those who fail. Those who do not take the retake or fail the retake will have their current test session terminated and must reschedule the test. However, Subject 2 and Subject 3 tests can only be rescheduled after ten days. For those who fail the Subject 3 Safety and Civilized Driving Knowledge Test, the passed Road Driving Skills Test scores remain valid.
6
3
Share

How to Retain License Plate When Changing Cars?

You can apply to retain the use of your license plate at the vehicle management office. According to Article 52 of the 'Automobile Registration Regulations,' after completing the transfer or cancellation of the vehicle registration, the original vehicle owner can apply to use the original license plate number when registering a newly purchased vehicle. Here are more details: 1. Conditions for using the original license plate: a. Apply within six months after completing the transfer or cancellation of registration. b. The vehicle owner must have owned the original vehicle for more than three years. c. All traffic violations and accidents related to the original vehicle must be resolved. 2. The old vehicle must first undergo transfer or scrapping. After completion, register the new vehicle at the vehicle management office within three working days. If retaining the original license plate for a scrapped vehicle, the scrapping certificate must be presented.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.