How to Quickly and Accurately Perform Parallel Parking in Real Life?

What is the reason for the vibration when stepping on the brake in D gear for Camry?

The reason for the vibration when stepping on the brake in D gear for Camry is due to brake pad or brake disc failure. When the vehicle brakes, the components will stop working in the shortest time, and the intermediate buffer point will cause some vibration. Additionally, after prolonged use, the brake pads wear out, leading to slower response. The Camry has a length, width, and height of 4885mm, 1840mm, and 1455mm respectively, with a wheelbase of 2825mm, and the drive mode is front-wheel drive. The Camry is equipped with a 2.0L naturally aspirated engine, paired with a CVT continuously variable transmission. This engine has a maximum power of 131kW and a maximum torque of 210Nm.

18

2

Share

How wide is a typical sedan?

A typical sedan is approximately 1.8 meters wide and about 4.8 meters long. Sedans are categorized into several length types: 1. Mini cars: Generally refer to models with a wheelbase below 2400mm, such as the Chery QQ3 and Chang'an Benben; 2. Small cars: Typically refer to models with a wheelbase between 2400mm and 2550mm, such as the Honda Fit and Toyota Vios; 3. Compact cars: Usually refer to models with a wheelbase between 2550mm and 2700mm, such as the Volkswagen Sagitar and Honda Civic; 4. Mid-size cars: Generally refer to models with a wheelbase between 2700mm and 2850mm, such as the Honda Accord and Toyota Camry.

9

0

Share

What does VDC mean in a car?

It refers to the Vehicle Dynamics Control (VDC) system. The English name is Vehicle Dynamics Control, abbreviated as VDC, and the Chinese name is the vehicle dynamic control system. When the car experiences wheel slippage, rollover, or loss of tire traction, the VDC system immediately intervenes. It reduces the engine speed while purposefully applying braking control to individual wheels, ultimately guiding the car back to its normal driving path, thereby avoiding the dangers caused by loss of control. Differences between VDC, ABS, EBD, and TCS: TCS function: When the drive wheels slip, the TCS control system will reduce the engine torque via the ABS/VDC control system. If necessary, it communicates with the automatic transmission control module to change shift timing, which reduces wheel slippage, improves the vehicle's acceleration performance, and eliminates wheel steering failure, enhancing driving stability. ABS function: The Anti-lock Braking System detects wheel speed during braking and sends the detected signal to the ABS control unit. The ABS control unit controls the braking force (brake fluid pressure) via solenoid valves to prevent wheel lock-up. It improves operational stability during emergency braking and makes it easier to steer around obstacles. EBD function: During braking, EBD detects minor slippage in the front and rear wheels. If slippage occurs, EBD controls the rear wheel braking force (brake fluid pressure) to minimize rear wheel slippage and improve stability during braking. As a supplement to TCS/ABS functions, the VDC system detects steering input and braking operation via the steering angle sensor and brake switch. Using sensors like the vehicle speed sensor, it determines the vehicle's driving state (understeer/oversteer). When the vehicle makes sharp turns or drives on slippery surfaces, the VDC system adjusts engine torque or applies independent braking to individual wheels to maintain driving stability. In automotive industry-developed countries, the ABS/ASR system has evolved into the Vehicle Dynamics Control (VDC) system. This system functionally and structurally integrates the control systems of the car's braking, driving, suspension, steering, engine, and other major components. It ensures excellent directional stability under various harsh conditions, such as icy roads, uneven surfaces, curved roads, and during evasive maneuvers, lane changes, braking, acceleration, and downhill driving, regardless of load, tire pressure, or tire wear. The application of VDC completely relieves drivers of high demands in braking, acceleration, and steering, marking a new milestone in active vehicle safety. Other button functions in the car are as follows: Fuel tank opening button: This button is used to remotely open the fuel tank cap from inside the car. Vehicles equipped with this button allow the driver to open the fuel tank cap from inside. ESP switch: This is used to turn the vehicle's ESP system on or off. The vehicle's ESP system is set to the working state by default. Reverse radar button: This allows the owner to turn the car's reverse radar system on or off as needed. The driver can press this button to manually control the operation of the reverse radar.

2

4

Share

How to Drive an Automatic Transmission Car in Stop-and-Go Traffic on a Slope?

Methods for driving an automatic transmission car in stop-and-go traffic on a slope: Maintain a necessary driving distance from the vehicle in front, press the brake, shift into neutral while pulling the handbrake. For gentle slopes, you can use the D gear to climb; for steeper slopes, you can shift into a lower gear for climbing. The automatic transmission must be completely stopped before shifting into reverse gear. If you shift into reverse before the car has fully stopped, the strong force may damage the planetary gear set or even the entire transmission. Introduction to the gears of an automatic transmission car: 1. P is the parking gear, used when parking; 2. R is the reverse gear, used when reversing; 3. N is the neutral gear, used when starting the engine; 4. D is the drive gear, used when driving forward; 5. L is the low gear, mainly used for climbing or descending slopes; 6. S is similar to 2nd gear, only shifting between 1st and 2nd gears.

15

5

Share

What to Do When the Handbrake Button Won't Press?

Solutions for a stuck handbrake button: First, lift the handbrake upward while pressing the button during the lifting process to release it. If the handbrake is already pulled up, try pulling it upward forcefully again, and the button should pop out. If this doesn't work, it's necessary to visit a repair shop. The professional term for the handbrake is auxiliary brake, which operates differently from the main brake system. It uses a steel cable connected to the rear brake shoes to apply braking force. Prolonged use of the handbrake can cause the steel cable to undergo plastic deformation. Since this deformation is irreversible, long-term use will reduce its effectiveness and increase the handbrake's travel distance. The handbrake system also includes a return spring. When the handbrake is engaged, the spring stretches; when released, the spring returns to its original length.

11

1

Share

How to Remove Chewing Gum Stuck on a Car?

Methods to remove chewing gum stuck on a car: First, use a hot air blower to soften it, then peel it off to remove most of it, but there will be residue. Then, use the following methods to remove the remaining residue: 1. White vinegar: Pour a little white vinegar on the chewing gum to soften it, then use cotton or a towel dipped in white vinegar to scrub repeatedly until clean; 2. Alcohol: Dilute alcohol or high-proof liquor with hot water, spray it on the area with chewing gum residue, and wipe with a towel; 3. Essential balm: Drop a few drops of essential balm on the chewing gum to soften it, then use a towel dipped in water to scrub; 4. Egg white: Apply egg white on the chewing gum to loosen it, then wipe it off one by one, and finally clean with a towel soaked in soapy water; 5. Tar remover: Purchase and use a tar remover, spray it on the chewing gum, wait for it to soften, then wipe it off with a towel.

8

2

Share

How to Quickly and Accurately Perform Parallel Parking in Real Life?

What is the reason for the vibration when stepping on the brake in D gear for Camry?

How wide is a typical sedan?

What does VDC mean in a car?

How to Drive an Automatic Transmission Car in Stop-and-Go Traffic on a Slope?

What to Do When the Handbrake Button Won't Press?

How to Remove Chewing Gum Stuck on a Car?

How to lock a Crown car?

What to Do If the Auto Start-Stop Suddenly Stops Working?

How to Turn on the Headlights of Audi Q2L?

What are the symptoms of aging spark plugs?